Used Peddinghaus Stempel for sale (133)

Condition: good (used), Vice, bench vice, metalworker's vice, parallel vice, heavy-duty vice -Parallel vice: jaw width 150 x 30 mm -Wingspan: 180 mm Csdjxc E D Dopfx Agcshf -Dimensions: 490/210/H200 mm -Weight: 26.2 kg

Condition: good (used), Year of construction: 1988, Ja Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V Chsdjryaqyspfx Agcef round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: used, Year of construction: 1986, round bar steel - mm square edge steel - mm L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm Codpst D Nz Aefx Agcjhf shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: used, Technical details: bending angle max.: 0 - 225 ° operating voltage: 380 V revolutions per minute: 5 -16 U/min Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Cjdpfxjx Adbns Agcehf Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: used, linear rail with folding cams Csdpfxsvcmrge Agcohf Height adjustable for attachment to hole punches

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddycut 275 6-way combined section steel shear Available immediately from site: Peddinghaus section steel shear Type Peddycut 275 Year of manufacture 1987 Pressure capacity 27 tons Table 400 x 250 mm Thrust 90 mm Power 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Chedpfx Ajwfdbpjgcjf Round steel 28 mm Square bar 25 mm Knife pitch 175 mm Punch stroke 24 mm Punches 20 mm in 19 mm or 30 mm in 6.5 mm sheet Foot switch Various punches Transport: from site

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 18,300 mm, feed length Y-axis: 1,000 mm, total length: 20,500 mm, drilling capacity: 50 mm, total height: 2,560 mm, total width: 3,500 mm, quill stroke: 330 mm, workpiece weight (max.): 1,088 kg, table width: 1,000 mm, table length: 18,300 mm, 2005 Peddinghaus Avenger MDL1000/B CNC Beam Drilling Line Chodou Nyg Uepfx Agcsf Machine Type: Single Spindle CNC Beam Drilling Line Control: Siemens Sinumerik Year: 2005 Condition: Good. Can be viewed running Includes 60ft Table Technical Specification Max Beam Size: 60ft x 40" (18.3m x 1000mm) Max Beam Weight: 730lbs/ft (1088kg/m) Min Drill Diameter: 1/4" (6.5mm) Max Drill Diameter: 2" (50mm) Max Thickness: Up to 10" (250mm) Max Speed X-axis: 120 ft/min (37m/min.) Max Speed Y-axis: 120 ft/min (37m/min.) Spindle Power: 13 3/4hp (10KW) Drilling Feed Rate: 2" – 10" per min (50-254mm/min) infinitely variable Spindle Stroke: 13" (330mm) max Total power: 20 HP (14.9 KW) Power Supply: 400V, 3-ph, 50 Hz Average Output: 200 to 400 holes per hour depending on the profile drilled Approx Floor Space Required: 20.5 x 3.5m Machine Height: 2.56m

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Profile Steel Shear Peddinghaus Hydraulic machine with 5 workstations for punching, notching, and shearing flat bar, angle iron, and solid material. Punch activation via hand lever, profile steel shear with foot pedal. Punch throat: 510 mm Pressing force: 60 tons Throat depth: 510 mm Cutting capacity: 500 x 12 or 400 x 16 mm Punching diameter: 27 mm in 17 mm Chodpox Ab Dysfx Agcof Punching diameter: 39 mm in 12 mm Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive power: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: €4,500 plus VAT, ex location

Condition: used, Professional steel shears for sheet metal fitters, assemblers, workshops, heavy-duty construction Cedpfxoc Sc Ifj Agcehf sturdy design with scissors body made of hardened and tempered steel Tooth lever transmission Lever fuse about torsion spring Blade made of high quality steel, hardened and ground adjustable clamp cut sheets, flat, round and square steel Steel sheet up to mm: 8 Steel up to mm: 20 Square steel up mm: 18 Blade length mm: 175 Net weight kg: 47.5 Dimensions ca. 0.5 x 0.25 m x 2 m

Condition: excellent (used), Max. punching force: 600 kN Working pressure: 250 bar Angle steel 90°: 130x12 mm Hole diameter and thickness: 31x15 mm Cjdjxwpkdopfx Agcshf Weight: 1,930 kg

Condition: used, Technical details: Chedpfxoxu Dx De Agcjf dimension machine xH: 1,8 x 1,1 x 1,0 m

Condition: used, Year of construction: 2005, round bar steel 32 / 17 mm square edge steel 30 x 18 mm L-beam 100 x 8 mm punching pressure 50 t weight of the machine ca. 900 kg dimensions of the machine ca. 1000 x 700 x 1700 mm Csdpfx Aowu Hkfjgcehf Features: - Flat steel shears Cuts flat steel: up to 350 x 13 mm L-steel, 45° cut: up to 100 x 8 mm Blade cutting length: 370 mm Working height: 734 mm - Profile and bar steel shears Shear cross-section: max. 1550 m² Stroke, infinitely adjustable: 10 - 36 mm - Shears with standard blade 90° L-steel 90° cut: up to 100 x 8 mm Round steel: 32 + 17 mm Square steel: 30 x 18 mm U-steel, 90° cut: up to 100 mm Double-T steel, 90° cut: up to 100 mm Working height (center of blade cross): 1044 mm - Notcher with square notcher U-steel, in flange: 80 - 120 mm Double-T steel, in flange 80 - 120 mm Notch width: 44.5 mm Notch depth: 50.0 mm Working height: 1000 mm

Condition: ready for operation (used), PEDDINGHAUS FLAT, PROFILE AND BAR STEEL SHEAR WITH NOTCHER AND PUNCH TYPE: 210 AD/13 MACHINE NO.: GJ 3730 YEAR OF MANUFACTURE: 1970 Equipment: various punch tools and dies (see photo) standard accessories operating tools 2 foot switches for single/continuous stroke documentation Condition: workshop-tested, functional Chodpfx Aoxc Ep Tegcef

Condition: used, Profile shear for steel with notching unit Ideal for construction sites as it is mobile; of course also suitable for indoor use Peddinghaus 13 RP / 10 Angle profile: 60x7mm T-profile: 60x7mm Solid square: 20x20mm Round: 22mm Flat: 90x14mm Chedjw Ip D Hopfx Agcof Lever shear: Tmax: 10mm Pickup location: 28755 Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to tradespeople and without warranty.

Condition: used, Year of construction: 2004, Punching force: 500 kN Chodou Hza Depfx Agcjf For example, punch a 20 mm hole in 18 mm steel Stroke triggering via foot switch Assortment of tools is included in the price Weight: 1400 kg

Condition: good (used), functionality: fully functional, Year of construction: 1978, Equipment: foot remote control, Performance data: Sectional steel shears: L-steel 90° cut 80 x 8 mm L-steel 45° cut 50 x 6 mm Section steel cutter: L-steel 90° cut 60 x 6 mm T-steel 90° cut 60 x 7 mm L + T steel 45° cut 50 x 6 mm Special knives: U-steel 80 mm I-steel 100 mm Flat steel 80 x 12/ 120 x 8 mm Round steel cutter: Round steel 28 mm Square steel 25 x 25 mm Flat steel shear 100 x 11/10 mm triangular notcher 8 mm strokes: 36 1/min drive: 2,2 kW weight: approx. 450Kg Cjdshx Ekpjpfx Agcshf Incl. base frame as shown All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Chodjhxzmcepfx Agcef Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1991, round bar steel 35 mm square edge steel 32 mm L-beam 120 x 12 mm flat steel 400 x 16 / 200 x 20 mm punching pressure 60 t stroke 10 - 27,5 mm throat 410 mm punch diameter 27 in 17 mm total power requirement 7,5 kW weight of the machine ca. 2000 kg dimensions of the machine ca. 1800 x 800 x 1800 mm Equipment: - Notcher, hole punch, flat steel blade, angle steel blade Chsdpfx Aov Hti Tsgcof - Stop table on hole punch + notcher - Contact stop 1000 mm - 2x foot switches - Operating instructions

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 4422559493014, Equipment: CE marking, Peddimax 600 Equipment - Flat, profile, and bar steel shear Chedpfjrknnfox Agcef - Notching & punching unit 600 kN - Mechanically adjustable profile and flat steel hold-down device - Quick-change punch system Punching table - Universal punch saddle - Material support table for notching device - Various punches and dies

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom. Csdjxp Ndhopfx Agcshf

Year of construction: 1997, condition: used, machine/vehicle number: 0201-200066, Used Peddinghaus DSC300 DRILL drilling system for CNC-controlled drilling of sectional steel with roller measuring device for length measurement and profile positioning. The Peddinghaus DSC 300 drilling system is a small CNC-controlled drilling system with 3 drilling axes and a roller measuring system for length measurement and material transport. Cjdet Udb Ejpfx Agcjhf

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Chjdpfx Agou Ick Tjcsf Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. *

Condition: used, Year of construction: 1999, pressure 30 t Csdpfx Agovanvzecjhf plate thickness 800 mm keins weight of the machine ca. 1,3 t

Condition: refurbished (used), functionality: fully functional, Peddinghaus reinforcing steel bending machine. Refurbished machine by former Peddinghaus employees. Invoice with VAT. Chjdpfx Agoxvd Nljcsf

Condition: reconditioned (used), functionality: fully functional, control type: manual, degree of automation: automatic, actuation type: electric, Rebar bending machine with sieve control, overhauled by a former Peddinghaus employee. The machine can be delivered or collected. Invoice with VAT. Cedpfx Agsxvd I Iocjhf