Used Peddinghaus 214/200 for sale (120)

Condition: ready for operation (used), A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg. Lhedsttv Tvepfx Akqef

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm -Wingspan: 200 mm Lhjdsddfh Eopfx Akqjf -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: used, Year of construction: 2004, Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke triggering via foot switch Assortment of tools is included in the price Lhedou Hza Depfx Akqof Weight: 1400 kg

Condition: used, Punching force: 300 kN Dimension(e) e.g. a 20 mm hole in 12 mm steel Stroke triggering via foot switch Support table Assortment of tools is included in the price Lhjdpfx Akjy Epkgoqof

Condition: used, Year of construction: 1991, Maximum punching force: 1100 kN Maximum shearing force: 1700 kN Stroke discharge: 510 mm Hole 31 in 25 mm Flat bar: 500 x 22 mm Hydraulic hold-down for the flat bar blade Four-square latch Weight: approx. 5000 kg Lhsdpsf Nwn Uefx Akqjf Very good condition

Condition: used, functionality: fully functional, Section steel shear and punch type 210/11, 80x8, beam 10 mm, solid material 30 mm, T-section 80x8 Lsdey Dh Eiopfx Akqshf

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 Lhodov D Nzyopfx Akqof See condition

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Lhsdpjy Emipjfx Akqsf Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Profile Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material. Punch activation by hand lever, profile shear with foot pedal. Ljdpfx Akoy Emiioqshf Throat depth: 510 mm Press force: 60 tons Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punching diameter: 27 mm in 17 mm plate Punching diameter: 39 mm in 12 mm plate Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,000 plus VAT, ex works.

Condition: used, total length: 1,700 mm, total width: 820 mm, total height: 1,570 mm, Empty weight: 580 kg - Documentation available: No - CE marking present: Yes Lhedpfxeymfbfj Akqof - CE certificate present: No - Serial number: 4077950107003 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 38 - Round bar cutting capacity [mm]: 32 - Shearing width [mm]: 300 - Max. plate thickness shearing [mm]: 15 - Options: Length stop - Transport dimensions: 1700mm x 820mm x 1570mm (l x w x h) - Transport weight [kg]: 580kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2002, functionality: fully functional, Detailed description to follow Lhedpfx Aey D N Rgekqof

Condition: used, for sheet thickness up to: 7 mm blade length: 175 mm Round material up to: 20 mm square material up to: 18 mm Ledsdp U Apspfx Akqjhf space requirement: 1000 x 770 x 690 mm hand-guided

Condition: used, machine/vehicle number: PA 1107, flat steel capacity: 80 x 10 mm Lhodpfx Akjby Dq Rjqsf electrical connection: 380 V, 1,3 kW space needed: 1000 x 650 x 1480 mm weight: 400 kg

Condition: like new (used), Year of construction: 1995, Roller conveyor length: 6000 mm Rolls divided, total width: 280 mm Min.height: 630/760 mm Max.height: 1150/1300 mm Difference between the height information given by rollers and the transverse movement Weight: 625 kg Lodpfx Akjgyk A Doqohf

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment Ledpfxeibq Ite Akqehf total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm Ljdpfxeydqn So Akqjhf total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined Lhsdjt D Nz Aopfx Akqof

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: ABCM 1250/3, type of input current: three-phase, Gas burner for I-beams. manufacturer - Peddinghaus Germany; type - ABCM 1250/3; control - Fagor; Lodpforbif Tjx Akqshf The device is connected and functional.

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm Lodpfx Aeyrhyuokqshf table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: refurbished (used), functionality: fully functional, total width: 800 mm, total length: 1,100 mm, total height: 1,100 mm, bending angle (max.): 360 °, overall weight: 600 kg, We offer this refurbished Peddinghaus Perfekt 32 KA or 32 PA rebar bending machine, year of manufacture unknown. Manufacturer: Peddinghaus Model: Perfekt 32 KA/PA PLA Lhedpfxjyxc Smj Akqof Serial number: 350114786/01 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch Lhedpfx Aek D Nt Dokqef -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Ledoi Duh Iepfx Akqjhf Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: good (used), End Roller Stands, Manufacturer: Peddinghaus Height adjustable from 0.68 m to 1.1 m 2 rollers, total width: 260 mm Roller diameter: 108 mm Lodpfoyuukxox Akqjhf Tube diameter (top – bottom): 70 mm – 90 mm Base plate diameter: 500 mm Approximate weight: 40 kg

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Lhedpfx Akjxp Ndhoqsf Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1992, functionality: fully functional, drilling capacity: 40 mm, spindle stroke: 300 mm, number of spindles: 3, overall weight: 9,000 kg, Drilling machine for steel structures - drilling holes in steel profiles. manufacturer - PEDDINGHAUS Germany; type - TDK 1000/3; year of manufacture - 1992; number of drilling spindles - 3 pcs. (two horizontal and one vertical); drilling diameter in S355 steel - from 8 to 40 mm; type of drills - HSS high-speed steel; drill mounting in the spindle - Morse taper 4; drill cooling - through the spindle and channels inside the drill; spindle feed - hydraulic with pressure force adjustment; spindle extension - max. 300 mm; material feed and length measurement - roller; CNC control - SIEMENS Sinumerik 840; software - CIM Steel; Production capabilities: •drilling INP I-beams: 80-600 mm, IPE: 80-600 mm, IPB: 100-1,000 mm, IPBL: 100-1,000 mm, IPBV: 100-1,000 mm; •drilling UWP channels: 50 x 25 - 400 mm; Lhjdpfxjpl Dyco Akqof •drilling equal-sided angles: 80 x 8 mm - 200 x 24 mm; •drilling unequal-sided angles: 80 x 65 x 8 mm - 250 x 90 x 16 mm; •drilling flat bars: min. 15 mm; power consumption - 35 kW; original paint - the machine has not been painted; weight - 9,000 kg; CE - does not have; The machine is connected to the power supply, ready for testing.