Used Peddinghaus Peddycut 275 H for sale (118)

Condition: good (used), functionality: fully functional, Year of construction: 1988, Profile steel shears Peddinghaus Peddycut 275, 6-way combination Immediately available ex works: Profile steel shears Peddinghaus Type Peddycut 275 Year of manufacture 1987 Pressing force 27 tons Table 400 x 250 mm Overhang 90 mm Capacity 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square steel 25 mm Blade length 175 mm Punch stroke 24 mm Hjdpfx Anezkg Rno Njfn Pierces 20 mm holes in 19 mm or 30 mm thick sheet metal Foot switch Bobmewfdbpsm Av Euedc Various punch dies Transport: ex works

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm Hjdpoydqn Sjfx An Nsfn shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: like new (used), Year of construction: 2008, machine/vehicle number: 422250708034, Punching force: 500 kN Stroke: 32 mm Adjustable stroke: 10 - 32 mm Stroke rate: 35 /min Standard punching tool: 31 Ø in 12 mm with punching table: 24 Ø in 16 mm with special punching tool: 58 Ø in 7, 65 Ø in 6, 90 Ø in 4 and 130 Ø in 3 mm Hydraulic drive: 380 V, 4 kW Weight: 1530 kg Space requirement: 1200 x 1100 x 1680 mm The machine has only 303 operating hours! Hjdpfx Anjz Dit Nj Njfn

Condition: used, Year of construction: 1966, 5 Hsdpfx Ansx U A Nko Njfn weight 5 t .

Condition: used, Year of construction: 1985, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, Hfsdpfx Aovg R Rzjn Nsn angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm Hsdpfx Aet D Nz Asn Nofn shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: used, Year of construction: 2007, Punching force: 500 kN Hsdpfx Aoy Uybwsn Nefn For example, punch a 20 mm hole in 18 mm steel Stroke triggering via foot switch Assortment of tools is included in the price

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Punches 20 mm holes in 19 mm steel Hfodpfxoq D E Tco An Non Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Very good condition

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressing force 50 T Hfsdjit T Hyjpfx An Nen - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - Punching in ST 40 steel, e.g.: - up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

Condition: good (used), Year of construction: 2005, machine/vehicle number: 4222559205002, Offer 25437 Technical Data: Hodpfx Anex S Ehwj Nsfn - Pressing force: 500 kN - Stroke infinitely adjustable: 10 - 32 mm - Strokes per minute: 22 - 27 1/min - Throat depth: 510 mm - Installation height: 350 mm - Drive: 400 V / 4 kW - Punching, for example: up to 27 mm Ø in steel: 14 mm - With special punching saddle, e.g.: up to 39 mm Ø in steel: 9.5 mm - e.g. up to 90 mm Ø in steel: 4 mm - Dimensions (approx.): W 700 x H 1700 x D 1200 mm - Weight (approx.): 1150 kg - Equipped with: - Hydraulic low-pressure centre punch locator - Extended punch holder for punching in section steel - Roller conveyor with gripper feed, control PEHU 101 - Roller conveyor approx. 6000 mm - Foot switch - Emergency stop button

Condition: ready for operation (used), Peddinghaus Model 210 Super 16 / Profile Steel Shear - COMPLETE TECHNICAL DATA, SEE PHOTO - Punching force 860 - 900 KN (86-90 tons) - Punching capacity max. 31mm / 20mm thickness - Reach approx. 510mm - Punching stroke max. 29mm - Stroke rate 40-45 strokes / minute Material capacity (shearing & notching) - Round steel up to max. 50mm - Square steel 40x40mm - Angle iron (L-profile) 140x140x13mm - Notching (I & T steel up to 80x14mm) - Drive power 4 KW - WITH PUNCHING TOOLS & Punches & Spare blades - Foot switch - DOCUMENTATION Hfedpfez Dq Tkjx An Nen Dimensions: L x W x H 2.1 x 0.8 x 2.2 meters / Weight 3700KG Subject to errors / typographical errors

Condition: used, Year of construction: 1984, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm Hfsdpegvkmnjfx An Njn punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Hfsdpfx Asu Ick Ten Nsn Various punching tools Punches and dies i.D. *

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Hedpfxsxp Ndho An Nofn Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1997, Thread(e) e.g. a 40 mm hole in 20 mm steel Stroke triggering via foot switch Including finder for pegging and setup Assortment of tools is included in the price Hfsdpfx Ajizuhpsn Njn Punching force: 1000 kN mass: 2400 kg punching force: 1000 kN

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm Hfedsxabrfopfx An Njn stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 44006 302 01 01, overall weight: 1,400 kg, total length: 1,800 mm, total width: 1,800 mm, total height: 2,000 mm, Profile steel cutting machine Peddinghaus 210 Super 11 Availability: Immediately - by arrangement Can be inspected while powered: Yes Technical data: Voltage: 220/380 V Rated current: 10/6 A Fuse rating: 20/16 A Type of current: 3-phase Frequency: 50 Hz Motor: 8.3/4.8 A Scope of delivery: Accessories as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 1800 x 1800 x 2000 mm Weight approx.: 1400 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: Hfedpfx Ansz Hlhbj Non ►Upon request, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Punching force: 300 kN Dimension(e) e.g. a 20 mm hole in 12 mm steel Stroke triggering via foot switch Support table with stops Assortment of tools is included in the price Hsdpfx Ansy Epkgj Nsfn

Condition: good (used), Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press -Stamp holder: with slotted punch tool, without die -Socket: Ø 51 mm / Bolt circle Ø 110x18 mm see photos -Punch tool: Slotted hole 22.5x50 -Dimensions: Ø 135 x 180 mm -Weight: 6.7 kg Hfodpfxox Idm Ro An Njn

Condition: good (used), Year of construction: 2008, functionality: fully functional, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Hfsdpjz Hfbbjfx An Nsn Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit.

Condition: used, 5-way combination profile steel shear, PEDDINGHAUS Type 210 AD/13 Machine No. 529A059, Year of manufacture approx. 1970 Punching unit: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal Overhang 365 mm Round bar shear: Cutting capacity, round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shear: Shearing capacity, angle iron at 90° 110 x 10 mm Shearing capacity, angle iron at 45° 90 x 9 mm T-steel 110 x 10 mm Hfsdpfx Anei Duh Ij Njn Notching device: Rectangular notching up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz - Center-finding device via hand lever and centering device - Mechanical stroke release via hand lever - Flat bar shear equipped with 2° blade - Mechanical clamp on the profile steel shear, round bar shear and on the flat bar shear Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg Good condition

Condition: good (used), Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder -Stamping tool: die holder Hsdpfx Anjzniqxe Nsfn -Hole: Ø 45 mm -Bore: Ø 33 mm -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg

Condition: used, Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies -Hole: Ø27/33 x 257 mm -Dimensions: 360/105/H135 mm Hedpfx Anezm Iy Ns Nsfn -Weight: 5.0 kg

Condition: good (used), Stop, depth stop, length stop for press brake, bending machine, guillotine shear..., electric stop for profile steel shear, contact length stop -Manufacturer: Peddinghaus, electric stop contact length stop for profile steel shears flat steel shears Hedpjznkr Defx An Nefn -Stop head, tiltable, swiveling -Hole: Ø 50 mm -Transport dimensions: 440/270/H155 mm -Weight: 6.4 kg

Condition: used, Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies Hfsdpfx Ajzm I A Den Non -Hole: Ø30 x 258 mm -Dimensions: 310/100/H125 mm -Weight: 4.6 kg