Used Peddinghaus Hydraulic 1000 for sale (127)

Condition: good (used), Year of construction: 2004, functionality: fully functional, PEDDINGHAUS TDK 1000/9 DRILLING MACHINE 9 SPINDLES MAXIMUM PROFILE 1000 X 420mm MEBA 1020 DGP SAWING MACHINE cutting diameter: 510 mm capacity 90 degrees: round: 510 mm Ksdpfx Anozc I Iyoysdn capacity 90 degrees: flat: 1020 x 510 mm capacity 60 degrees: round: 500 (400) mm capacity 60 degrees: flat: 500 (400) x 510 mm capacity 45 degrees: round: 510 mm capacity 45 degrees: flat: 750 (670) x 510 mm

Condition: used, Year of construction: 2007, Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke triggering via foot switch Kdsdpfxjy Uybws Anyen Assortment of tools is included in the price

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. Ksdpfx Anou Ick Teyodn *

Condition: used, Year of construction: 1997, Thread(e) e.g. a 40 mm hole in 20 mm steel Stroke triggering via foot switch Including finder for pegging and setup Assortment of tools is included in the price Punching force: 1000 kN mass: 2400 kg punching force: 1000 kN Kdedpjizuhpjfx Anyjn

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Kjdpfxoyrhyuj Anyjdn Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3, up to Ø 32.5 mm Quick-change device for punches 2 and 5 up to Ø 31.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: used, Punching force: 300 kN Kodpoy Epkgjfx Anyodn Dimension(e) e.g. a 20 mm hole in 12 mm steel Stroke triggering via foot switch Support table with stops Assortment of tools is included in the price

Condition: used, Year of construction: 1992, functionality: fully functional, drilling capacity: 40 mm, spindle stroke: 300 mm, number of spindles: 3, overall weight: 9,000 kg, Drilling machine for steel structures - drilling holes in steel profiles. manufacturer - PEDDINGHAUS Germany; type - TDK 1000/3; year of manufacture - 1992; number of drilling spindles - 3 pcs. (two horizontal and one vertical); drilling diameter in S355 steel - from 8 to 40 mm; type of drills - HSS high-speed steel; drill mounting in the spindle - Morse taper 4; drill cooling - through the spindle and channels inside the drill; Kodpfxjpl Dycs Anyjdn spindle feed - hydraulic with pressure force adjustment; spindle extension - max. 300 mm; material feed and length measurement - roller; CNC control - SIEMENS Sinumerik 840; software - CIM Steel; Production capabilities: •drilling INP I-beams: 80-600 mm, IPE: 80-600 mm, IPB: 100-1,000 mm, IPBL: 100-1,000 mm, IPBV: 100-1,000 mm; •drilling UWP channels: 50 x 25 - 400 mm; •drilling equal-sided angles: 80 x 8 mm - 200 x 24 mm; •drilling unequal-sided angles: 80 x 65 x 8 mm - 250 x 90 x 16 mm; •drilling flat bars: min. 15 mm; power consumption - 35 kW; original paint - the machine has not been painted; weight - 9,000 kg; CE - does not have; The machine is connected to the power supply, ready for testing.

Condition: used, Year of construction: 2002, functionality: fully functional, Detailed description to follow Ksdpfx Anoy D N Rgoyjdn

Condition: used, Year of construction: 1999, hydraulic ja 100 t Kedpfsx U A Tvjx Anyodn weight of the machine ca. 2,9 t

Condition: new, punching pressure 28.0 t Kdodpfxow U U S Ns Anyen punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Kedsxabrfopfx Anyodn Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: used, Year of construction: 2004, Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke triggering via foot switch Kodpfxsu Hza De Anysdn Assortment of tools is included in the price Weight: 1400 kg

Condition: good (used), Year of construction: 2005, machine/vehicle number: 4222559205002, Offer 25437 Technical Data: - Pressing force: 500 kN - Stroke infinitely adjustable: 10 - 32 mm - Strokes per minute: 22 - 27 1/min - Throat depth: 510 mm - Installation height: 350 mm - Drive: 400 V / 4 kW - Punching, for example: up to 27 mm Ø in steel: 14 mm - With special punching saddle, e.g.: up to 39 mm Ø in steel: 9.5 mm - e.g. up to 90 mm Ø in steel: 4 mm - Dimensions (approx.): W 700 x H 1700 x D 1200 mm - Weight (approx.): 1150 kg - Equipped with: - Hydraulic low-pressure centre punch locator - Extended punch holder for punching in section steel - Roller conveyor with gripper feed, control PEHU 101 Kodpfx Aex S Ehwenysdn - Roller conveyor approx. 6000 mm - Foot switch - Emergency stop button

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 4203773681008, table length: 1,400 mm, table width: 600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the machine within the specified period from 28/07/2025 to 31/07/2025. TECHNICAL DETAILS Table dimensions: 1,400 x 600 mm Motor: 11.4 kW MACHINE SPECIFICATIONS Kedpfxowvi N Ts Anyodn Overall width: 2,500 mm Overall length: 2,200 mm Overall height: 2,000 mm Total weight: 1,500 kg Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Control voltage: 220 V with transformer Auxiliary voltage: 24 V Breaker rated short-circuit current: 0.165 kA Documents and Numbers Control number: 42037.301.01.00 Wiring diagram: 42037.301.01.01 Serial number: 42037.736.81.008

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Kjdpfey E N Hdjx Anyedn Hypertherm Plasma. Kemper Extraction Unit

Condition: used, Round bending machine PEDDINGHAUS BIFAX K for round steel and reinforcing steel Color: green Machine number: BXK 306941411 Condition: Used Location of the goods: Production hall Payment method: Advance payment / bank transfer Ksdpfxozclx Nj Anyjdn Shipping: Self-collection at the designated pick-up location. No shipping possible!

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Kjdpfx Aozd Ra Henyedn Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, sheet metal shears Ksdpfefgi Nqex Anyedn -Manufacturer: Peddinghaus sheet metal and round steel shear type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Blade length: 150 mm -Lever arm with: safety spring -Quantity: 1x lever scissors available -Price: per piece -Dimensions: 275/100/H1180 mm -Weight: 11 kg/pc.

Condition: used, Technical details: Kdjdpfxjxu Dx De Anyon dimension machine xH: 1,8 x 1,1 x 1,0 m

Condition: used, Max. Stanzkraft: 650 kN Hole e.g. a 20 mm hole in 20 mm steel For other performance data see nameplate or on request Includes assortment of punches and dies Kdodpjf Nwqlefx Anyen Very good condition

Condition: used, Punching force: 200 kN Thread, for example a 13 mm hole in 12 mm steel Viewfinder via handwheel Assortment of tools is included in the price Kdodsrmudgspfx Anyjn

Condition: used, Year of construction: 1992, Max. punching and shearing capacity: 800 kN Punches e.g. 25 mm holes in 20 mm steel Kjdpfjwak Hnsx Anysdn Shears on the flat steel shear on 350 mm up to 15 mm steel Further technical data on request With a range of punches and dies as desired

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down on plate shears Large support table on die side with stops Further technical data on request Kdsdpfx Astmyifsnyjn With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Punches 20 mm holes in 19 mm steel Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Kdedoq D E Tcjpfx Anysn Further technical data on request With a range of punches and dies as desired Very good condition

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Kodpjm T Amuofx Anyodn Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down device for a sheet metal shear Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg Very good condition