Section steel shear, profile shear

Peddinghaus 210/25s

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Cedpfewtpgtex Acpjrh Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm Cjdpfx Acoyk Dicspjrh work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized rear stop, 1000 mm - Hydraulic upper beam adjustment - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch - Operator's manual

Condition: good (used), Year of construction: 2012, fuel type: diesel, General information Field of application: Construction Weights Cedjx H Nliopfx Acpsrh Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Data: Performance: 60 kVA Engine: John Deere Length: 234 cm Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Special features: Lifting eye, consumption of approximately 14.75 liters per hour. On Weijer trailer. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 1990, machine/vehicle number: 79-3, Offer 26091 Codoyzpgpepfx Acpsrh Technical specifications: - Max. working width: 3200 mm - Max. material thickness at 40 kp / mm² yield strength: 2.5 mm - Bending angle electronically preselectable: 0 – 180° - Operation via hand or foot switch - Maximum opening width / stroke of upper beam: 200 mm - Height adjustment: - of the bending beam: 80 mm - of the lower beam: 90 mm - Upper beam drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Required space approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg

Condition: used, Rolling Machine Brand: JAMMES PROMECAM Type: HC 1310 Maximum thickness: 10 mm Maximum length: 3040 mm Rolling capacity: 1500 mm Upper roller diameter: 300 mm Side roller diameter: 220 mm Working speed: 0 to 7 m/mm Hydraulic control 1 hp motor Hydraulic unit motor: 5.5 kW Weight: 7000 kg Cjdpfxowf Ndis Acpjrh Dimensions: 5100 x 1000 x 1000 mm Type: 4-roller rolling machine

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Codpfx Ajztckiocporh Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm Crjdovh I T Njpfx Acpeh hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: used, Year of construction: 1983, sheet width 2540 mm plate thickness 2 mm Crsdpfxew H Dkae Acpoh distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories.

Condition: used, Year of construction: 1995, sheet width 3000 mm plate thickness 4 mm work height max. 900 mm 450 mm total power requirement 5,5 kW weight of the machine ca. 4800 kg dimensions of the machine ca. 4250 x 1500 x 1850 mm Equipment: Crodpfxoyk Diie Acpoh - electric bending angle adjustment - electric upper beam adjustment - foot switch - operating instructions

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Crodeum Ttzepfx Acpjh Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.