Used Peddinghaus 210/13 for sale (127)

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm L-beam:90° 110x10 mm flat steel:150 x 16 mm blade length:250 mm notching deepth up to:12 mm notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t Lsdpjcxxrpefx Adtsrn dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 See condition Ledpfxjv D Nzyo Adtsrn

Condition: used, 5-way combination profile steel shear, PEDDINGHAUS Type 210 AD/13 Machine No. 529A059, Year of manufacture approx. 1970 Lrodpsi Duh Ijfx Adten Punching unit: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal Overhang 365 mm Round bar shear: Cutting capacity, round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shear: Shearing capacity, angle iron at 90° 110 x 10 mm Shearing capacity, angle iron at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notching up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz - Center-finding device via hand lever and centering device - Mechanical stroke release via hand lever - Flat bar shear equipped with 2° blade - Mechanical clamp on the profile steel shear, round bar shear and on the flat bar shear Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg Good condition

Condition: good (used), Cutting performance: Flat bar shear Blade length: 250 mm Sheet metal up to: 13 mm Flat bar up to: 150 x 16 / 200 x 13 mm Profile steel shear Angle iron up to: 110 x 10 mm Mitre cut: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Mitre cut: 45° up to 90 x 9 mm U- and I-beams up to: NP 18 Stroke rate: approx. 30 1/min. Round bar shear Round bar up to: 42 mm Square bar up to: 38 mm Notching tool Sheet metal up to: 12 mm Notch width up to: 50 mm Notch depth up to: 85 mm Punching tool Reach: 370 mm Punching force: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot actuation - Support table on the punching tool - Various additional tool holders - Various replacement blades Lrjdeh Uhb Sspfx Adtjn - Extensive accessories

Condition: used, round bar steel 42 mm Ledpfx Aewth N Hedtjrn square edge steel 38 mm L-beam 110 x 10 mm cutting capacity 150 x 16 mm pressure 60 t hole punching press: throat 370 mm hole punching press: capacity (dia. x thick.) 25 x 16 / 20 x 19 mm 720 x 420 mm weight of the machine ca. 2,1 t dimensions of the machine ca. 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Lodpozgahrsfx Adtsrn Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: used, Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Shearing capacities: (see abacus) Round shearing: Ø 34 mm Lrodpfx Adszbrproten Square shearing: 30 x 30 mm Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Delivered with some punches Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1800 mm Weight: approx 1,2 T

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm Lredpfxevh I T No Adtsn hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: ready for operation (used), Punching capacity steel: 25x16mm, material strength: 45/60/80kg/mm² depending on hole diameter, angle steel 90°: 110x10mm, angle steel 45°: 90x9mm, T-steel 90°: 110x10mm, T-steel 45°: 90x9mm, U and I profiles: up to NP/IPE 18, round steel diameter: 42mm, square steel: 38x38mm, max. sheet thickness for notching: 12mm, notching width: 50mm. An on-site inspection is possible. Ledpoy Uyc Iofx Adtorn

Condition: used, Year of construction: 1978, serial number 4412956673057 95 to. ca. engine output 7,5 kW weight of the machine ca. ca 5 t dimensions of the machine ca. 2,2 × 1,0 × 2,3 m Lrodpfx Adoy Hl Rbstjn Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN)

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Manufacturer: Peddinghaus Model: 210/25s Lodpfxjwcqmae Adtern Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: used, PEDDINGAUS Type: 210/20 Lrjdpo Dv Nnofx Adtsn EXCELLENT CONDITION

Condition: used, functionality: fully functional, Section steel shear and punch type 210/11, 80x8, beam 10 mm, solid material 30 mm, T-section 80x8 Ljdpjy Dh Eisfx Adtern

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg Lrjdpfx Adecc Ubuoten

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressing force 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm Lrsdpfx Adeit T Hyjton - Drive 400 V / 7.5 kW - Punching in ST 40 steel, e.g.: - up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

Condition: used, round bar steel 34 mm square edge steel 30 x 30 mm L-beam 100 x 10 mm flat steel 100 x 14...160 x 11 mm blade length 175 mm T-beam 100 x 10 mm notching: l + T material 10 mm hole punhing press: pressure 45 t throat 305 mm total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 0,8 x 1,5 m * 5-fold combinated profile steel shear incl. Lodjyh Rnkspfx Adtjrn flat steel shear profile steel shear bar steel shear notcher hole punch * 2 foot switches * contact limit stop * various punching saddles

Condition: good (used), functionality: fully functional, Peddinghaus profile and punching machine with automatic stop Lredpfoyg D Nnjx Adten Very well maintained Punching force 45 t Incl. various punching dies

Condition: used, pressure 80.0 t punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7.5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears Lredpfxoxabi Rj Adton - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German (PDF)

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 Lodpfxey E N Hdj Adtjrn 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Condition: used, functionality: fully functional, Year of construction: 2016, Flat shear blades, 520 mm long, with four cutting edges, also for shearing angle iron 45° material support table with gauge stops on the flat shear station section shear knife for shearing angle iron 90° as well as rounds and squares Lrodpfjy Ndt Hsx Adtjn quick-change punching attachment up to 39 mm Ø, for punches and dies of the blue series or with universal die block for die no. 3 height-adjustable and swing-away stripper with exchangeable plate square notching attachment material support table on the notcher station two two-stage foot pedals and electric control elements on the punch station and notcher station hydraulic low pressure spotter for foot operation connecting sockets for external engagement, e. g. via electrical length stop integrated hydraulic power-pack

Condition: used, blade length oben 211/unten 180 mm plate thickness max. 6 mm Lsdoxbtrmepfx Adtern round bar steel max. 13 mm weight ca. 19 kg Sturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm. With compound action. Cuts sheet metals and round steel bar. Colour: Red-brown

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit Lodpfx Adoyrhyustorn With punching saddle for dies no. 3, up to Ø 32.5 mm Quick-change device for punches 2 and 5 up to Ø 31.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: used, Round bending machine PEDDINGHAUS BIFAX K for round steel and reinforcing steel Color: green Machine number: BXK 306941411 Condition: Used Location of the goods: Production hall Payment method: Advance payment / bank transfer Shipping: Self-collection at the designated pick-up location. No shipping possible! Ljdpfx Aezclx Njdtorn

Condition: good (used), End Roller Stands, Manufacturer: Peddinghaus Height adjustable from 0.68 m to 1.1 m 2 rollers, total width: 260 mm Roller diameter: 108 mm Tube diameter (top – bottom): 70 mm – 90 mm Base plate diameter: 500 mm Lsdpfx Aszgihnedtsrn Approximate weight: 40 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, PEDDINGHAUS TDK 1000/9 DRILLING MACHINE 9 SPINDLES MAXIMUM PROFILE 1000 X 420mm MEBA 1020 DGP SAWING MACHINE cutting diameter: 510 mm Ledpfx Aszc I Iysdtern capacity 90 degrees: round: 510 mm capacity 90 degrees: flat: 1020 x 510 mm capacity 60 degrees: round: 500 (400) mm capacity 60 degrees: flat: 500 (400) x 510 mm capacity 45 degrees: round: 510 mm capacity 45 degrees: flat: 750 (670) x 510 mm