Used Section steel shears 0 - 49t punching power for sale (43)

Condition: excellent (used), Year of construction: 1970, ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Hjdpfxod R Dkfo Aftofn Machine Type: 5-way combinable profile steel shear with punching unit Manufacturer: PEDDINGHAUS Model: Peddy Year of Manufacture: 1970 Condition: Very good Offer Type: Used machine Technical Data: Performance in mm: Sheet: Ø 10 mm Round: Ø 28 mm Hole: Ø 15 in 10 mm Drive Type: electric/mechanical Drive Motor: 1.5 kW Remarks: Punching unit, Notcher, Material stop, Swivel base Weight: 500 kg The machine is in excellent and fully operational condition and can be inspected and demonstrated at any time on our premises. We would be pleased if our offer meets your interest. Subject to errors, changes, and prior sale.

Condition: good (used), machine/vehicle number: 98260075, one used profile steel shear WMW Punching capacity 420kN(42Tons) throat of the punch 320mm flat steel shear shears 100x18mm bar shear shears solid material round/square 36/30mm Hjdpfx Asb Ilbfoftefn Further technical data on request.

Condition: good (used), punching force: 36 t, – Capacity: 36 tons – Hydraulic – 3 stations – Foot operation – Lighting Hsdpfjwdg Ipox Aftsfn – Emergency stop – 400V

Condition: good (used), Cutting performance: Flat steel shears Hfodpoh Uhb Ssfx Aftsn Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: good (used), Year of construction: 1978, Performance data: Sectional steel shears: L-steel 90° cut 80 x 8 mm L-steel 45° cut 50 x 6 mm Section steel cutter: L-steel 90° cut 60 x 6 mm T-steel 90° cut 60 x 7 mm L + T steel 45° cut 50 x 6 mm Special knives: U-steel 80 mm I-steel 100 mm Flat steel 80 x 12/ 120 x 8 mm Round steel cutter: Round steel 28 mm Square steel 25 x 25 mm Flat steel shear 100 x 11/10 mm triangular notcher 8 mm strokes: 36 1/min drive: 2,2 kW weight: approx. 450Kg Incl. base frame as shown All data without guarantee. Subject to prior sale. Hfjdohx Ekpopfx Afton The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, Year of construction: 2004, punching pressure 40.0 t square edge steel 28.0 mm L-beam 80 x 8.0 mm round bar steel 30,0 mm punch diameter 30 in 10 mm square material 28 x 28 mm shear: flat material 150 x 10 oder 100 x 15 mm adjustment of stroke 35.0 mm strokes per minute max. 24 H/min. voltage 400 V weight 1020 kg Hfjdpfx Aexau Uajftsn dimensions 910 x 670 x 1930 mm from a maintenance workshop well-maintained condition (!!) Equipment: - electro-hydraulic profile steel shears - punching station, flat steel shears, angle steel shears, profile steel shears - stepless adjustment of the stroke - very compact design - support table at the notching and punching station - various MUBEA punches + dies - flat steel station with manual material hold-down device - protective devices at work stations - 1x freely movable foot switch - operating instructions (PDF)

Condition: used, Year of construction: 1996, total length: 1,600 mm, total width: 1,100 mm, total height: 1,500 mm, Empty weight: 500 kg Capacity bar: 30mm Capacity strip: 300x10mm / 200x13mm Punch: diameter 28 in 13mm - Year: 1996 - Documentation available: No - CE marking present: Yes - Serial number: 4759 - Control: Conventional - Motor power: 2.2kW - Table width: 450mm - Table length: 800mm - Ram width: 60mm - Ram length: 45mm - Model: Hydraulic - Max. stroke: 80mm - Power: 45.0ton - Transport dimensions: 1600mm x 1100mm x 1500mm (l x w x h) Hfsdpfx Afow Duwrstsn - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, for sheet thickness up to: 7 mm blade length: 175 mm Round material up to: 20 mm square material up to: 18 mm space requirement: 1000 x 770 x 690 mm Hedpfjdp U Apjx Aftsfn hand-guided

Year of construction: 1994, condition: good (used), machine/vehicle number: 2466, Offer 14415 Technical data: - Flat steel shears cuts up to 350 x 6 mm - 200 x 12 mm - section steel shears - cuts - L-steel at 90° up to 80 x 8 mm - bar steel shear - cuts - round steel up to 30 mm - square steel up to 25 mm - punching machine - punching force 380 KN - throat 175 mm - punches holes in steel up to 27 mm Ø in 10 mm - drive 400 V / 2,2 kW Hedpfx Aei E Hfujftsfn - space requirement approx. W 500 x H 1280 x D 1000 mm - weight approx. 900 kg

Condition: excellent (used), Year of construction: 1979, Overhauled: 1999 Shear force: 2000 kN Cycle speed: 59 rpm Performance: Hfedpfov Ta Ucox Aftjn Round bar up to 63 mm in diameter, square bar up to 55 mm Machine weight: 7350 kg Dimensions: 2260 x 2920 x 1770 mm Bar feeder with separation: Max. bar length: 6 m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still powered.

Condition: new, functionality: fully functional, Year of construction: 2023, New Sunrise punch cutting machine IW-45K available from stock. Specifications IW-45K tonnage 45ton punching capacity ᴓ 22x15mm/ᴓ 40x8mm discharge 165mm angle bar 75x75x6mm 90⁰ strip 300x10mm Weight 870 KG Dimension 1050x760x1490mm Hfodpfx Afsvf I Ibeten Multiple models available from stock.

Condition: used, punching pressure 45.0 t punch diameter 22 in 15.0 mm punch diameter 38 in 8.0 mm round bar steel 30.0 mm square edge steel 25.0 Hfodpfxexaat Uo Aften L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V total power requirement 4.5 kW weight 1245 kg dimensions 1520 x 590 x 1700 mm In good condition (!!) New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector

Year of construction: 1990, condition: used, Flat steel scissors 45N / mm²: flat steel: 350 x 20 mm 230 x 20 mm Shear: L steel 90°: 140 mm x 13 mm L steel 45° 70 x 7 mm Rod shear: round steel: 45 mm Square steel: 42 mm Notchers: Square Hole punch ø: up to 40 in 16 mm Pressure capacity: 550 kN RADIUS: 305 mm Rated power: 5.5 kW Hfedpodczt Eofx Afton 2 working cylinder with 2 separate electric foot switches for 2-man operation Dimensions (L x W x H): approx. 1360 x 750 x 1565 mm Weight: 1260 kg

Condition: used, machine/vehicle number: PA 1107, flat steel capacity: 80 x 10 mm electrical connection: 380 V, 1,3 kW space needed: 1000 x 650 x 1480 mm weight: 400 kg Hjdoby Dq Rspfx Aftefn

Condition: used, Punching force: 400 kN (punches e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears With pipe notcher on the bar shear Hsdpfx Asw Im Shjftofn Foot switch for stroke activation Support table on the punching side Quick change device Range of tools is included in the price

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Hfsdpshxzmcefx Aften Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Pressure: ± 28 tons Punching capacity: Ø 20 mm at 10 mm / Ø 30 mm at 6.5 mm Flat bar capacity: 50 × 15 mm Hfjdpfxjw N Nado Afton Angle iron cutting capacity: 65 × 6 mm Shear width: 175 mm

Condition: good (used), punching force: 45 t, - Capacity 45 tons - Hydraulic - 4 stations - Foot control - Emergency stop Hfodpeu Havwjfx Aftjn - 400V

Condition: used, Technical details: throat: 250 mm number of strokes: 42 Hub/min sheet thickness - max.: 13 mm round bar steel: 36 mm square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,1 x 1,0 x 1,6 m Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Hodpfowp Edaex Aftofn Punching: max. 20 : 15mm, throat 250mm Foot control no longer available on both sides! Accessories various dies and various punches and small punches (see photo) *

Year of construction: 1998, condition: ready for operation (used), machine/vehicle number: 2131, Max. pressure: 55 kN Throat: 175 mm Adjustable punching stroke: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Notching stroke adjustable: 0 - 60 mm Hodpfenacy Tsx Aftofn Hydraulic drive: 380 V, 3 kW Floor space required: 1170 x 620 x 1470 mm weight: 930 kg

Condition: as good as new (ex-display), Year of construction: 2023, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Hfjdow N N H Dspfx Aften Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: used, Profile shear for steel with notching unit Ideal for construction sites as it is mobile; of course also suitable for indoor use Hodpfsw Ip D Hex Aftsfn Peddinghaus 13 RP / 10 Angle profile: 60x7mm T-profile: 60x7mm Solid square: 20x20mm Round: 22mm Flat: 90x14mm Lever shear: Tmax: 10mm Pickup location: 28755 Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to tradespeople and without warranty.

Condition: used, functionality: fully functional, control type: manual, actuation type: manual, Rebar bending machine, completely overhauled by a former Peddinghaus employee Hedpfxsw Dvz Ej Aftofn

Condition: used, machine/vehicle number: FI220, Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 ton. Hjdpfxok D Nt Dj Aftjfn -Punching performance: see photo nameplate -Projection: 360 mm -Accessories: incl. punching tool and 2nd table, see photos -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg Hfodpfx Ajf Ek H Ujften