Used Bending Roller for sale (13,287)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 10 h, machine/vehicle number: RoboCone RC9, working width: 900 mm, total height: 2,300 mm, warranty duration: 36 months, pressing force: 22 t, height adjustment type: electric, working length: 900 mm, Bending cell RoboCone RC9 CoastOne - Made in Finland Complete bending cell with a Cone C9 electric press brake and a Yaskawa / Motoman GP25 (25kg) robot. Pressing force: 22T Bending length: 900mm Iaedpjvnb N Defx Ahyel Spindles: 1x22T Control: TC15-2D graphics 36 months warranty after installation Delivery plus; available immediately Viewing under power possible at any time by appointment!

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm Iaedevuk Sbspfx Ahyel no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m with infinitely variable drive, material inlet inclineable, straightening rolls individually manually adjustable, pneumatic opening of the upper roller cassette, coil loop control via arm as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC Iasdpfx Aox Sr Dfshyol - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: - Roller width: 1350 mm - Max. pass-through height: 70 mm - Glue application: single- or double-sided - 2-roller system - Diameter of glue application rollers (top/bottom): 160 mm - Main motor: 0.75 kW Iodsx Tppuspfx Ahyjal - Dimensions (L/W/H): 2000x750x1550 mm - Weight: approx. 534 kg ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: new, sheet thickness: 10bending length: 4100upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle Isded Ab Ryspfx Ahyeal - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 10.250,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Iodpfswwt Ddsx Ahyoal Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Year of construction: 1999, condition: used, Manufacturer : Alexanderwerk Model : WP120x40V Year : 1999 Type: Roller compactor Application: dry granulation Materials: Stainless steel Roller diameter – 120 mm Roller width – 40 mm Capacity: up to 40 kg/h (lactose) Maximum pressing force – 20 kN/cm Maximum roller gap – 4 mm Iajdox R A Eqepfx Ahyel Maximum roller speed – 15 rpm Equipment includes : Allan Bradley PLC interface Feed hopper Rotary feed rotor Helical screw: conveying, pre-compacting and feeding material Roller compactors Flake crusher Pre- and fine granulator

Condition: used, Year of construction: 1990, material width 150 mm material thickness 0,5 - 5,0 mm no. of straightening rolls 7 straightening roll diameter 45 mm number of draw-in rolls 2 Ijdpfsvuk N Hox Ahyjal inlet roll diameter 72 mm material thickness / at material width 3,0 / 150 mm material thickness / at material width 4,0 / 120 mm material thickness / at material width 5,0 / 80 mm power requirement 3,0 kW weight of the machine 0,7 t dimensions (WxDxH) 1,3 x 1,1 x 1,6 m with infinitely variable drive, straightening rolls individually manually adjustable, coil loop control via light barriers as is where is, WITHOUT additional work The putting into operation in our warehouse can be offered additionally on request

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP S54 Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm from pipe diameter 1500 mm Rolling capacity (full working width) 12 mm Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Isdpsiivgrofx Ahysal Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: used, Year of construction: 1982, material width 250 mm material thickness 0,4 - 5,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm speed 3 - 15 m/min material thickness at 250 mm material width 3,5 mm material thickness at 100 mm material width 5,0 mm power requirement 1,8 kW weight 0,9 t Iaedpfevuk Nyox Ahyjl dimensions (LxWxH) 1,45 x 1,4 x 1,55 m with infinitely variable drive, centralized adjustment of the straightening rolls, indication via dial gauges, support of the levelling rolls, coil loop control via proximity switch material thickness 3,5 mm at material width 250 mm material thickness 5,0 mm at material width 100 mm can be inspected in running condition in our warehouse

Condition: new, functionality: fully functional, Year of construction: 2026, HAV 3293 Plate width: 3200mm Top Roll diameter: 930mm Side rolls diameter: mm 800 Iaodpfxoiivg Sj Ahyjl Machine weight: 150 Ton Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection Iaodpfoiivc Dex Ahyol cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3163 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rollers: planetary guide Working length: 3000 mm Top roll diameter: 630 mm Lower roll diameter: 570 mm Side rolls diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800mm Width: 3,600mm Height: 3,550mm Guaranteed capacities: for material with a yield point of 260 N/mm² Iodoiivfqspfx Ahyeal Rolling capacity (full working width) 70 mm Bending performance (full working width) 60 mm from pipe diameter 3150 mm Rolling capacity (full working width) 55 mm Bending capacity (full working width) 50 mm from pipe diameter 820 mm Standard equipment: Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection Iaodpfx Aheiivgysyol All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, BIKO B4 2014 Linear Four roll bending machine Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2014 Technical specifications: Number of Rolls: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 145 mm Lower roller diameter: 130 mm Side roller diameter: 130 mm Guaranteed installed power: 5.5 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 2,300 kg Length: 2,900mm Width: 900mm Height: 1,000mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 4 mm Bending performance (full working width) 3 mm Iajdpfx Asiinknehysl from pipe diameter 725 mm Rolling capacity (full working width) 3 mm Bending performance (full working width) 2 mm from pipe diameter 190 mm Standard equipment: Linear guide system for rolls movement Extremely wide bearing blocks Needle bearing for the rolls rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control Iasdpfx Asgd T R Dehysl • Cone bending device with electronic tilting

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm Isdpfjiink Sjx Ahysal from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: new, functionality: fully functional, Year of construction: 2026, max rolling capacity (cold): mm. 32 max prebending capacity (cold): mm. 24 at diameter mm. 2050 with material yield strength N/mm2 260 working length: mm. 3050 number of rolls: four top roll diameter mm. 410 pinching roll diameter mm. 390 driven rolls : two rotation speed 5 m./min. rolls rotation: hydraulic installed power: 30 PS Iodjf T Rzfepfx Ahysal Voltage 400V, 50Hz, 3Ph Inkl.: - hardened & polished rolls - cone bending device - electronic rolls parallelism - Siemens PLC Control - CE certificate - control console on wheels

Condition: new, functionality: fully functional, Year of construction: 2026, roller diameter: 200 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 8 mm, type of input current: three-phase, working length: 2,000 mm, Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2020 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 2000 mm Top roll diameter: 200 mm Lower roll diameter: 180 mm Side rolls diameter: 160 mm Guaranteed installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200mm Width: 1,000mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 1000 mm Rolling capacity (full working width) 5 mm Bending capacity (full working width) 4 mm from pipe diameter 265 mm Standard equipment: Linear guide system for roller movement Extremely wide bearing blocks Needle bearing for the roller rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rollers Ijdjd Iclropfx Ahyoal Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety lanyard with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, New three rolls angle roll Roundo R3 with tools, digital readout and remote control. Iajdpfod N Ahdex Ahyel

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Iaodpfxed Eqg Ho Ahysl Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Iasdpoc S N Riofx Ahysl Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min immediately available from the factory!

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Technical specifications: Iaodpsc S N Nqefx Ahyjl Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulically controlled three-roller bending machine Make BIKO, model B3 2021 Technical specifications: Number of Reels: Three Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 215 mm Side roller diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000mm Height: 1,100 mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 13 mm Bending capacity (full working width) 9 mm from pipe diameter 1075 mm Rolling capacity (full working width) 9 mm Bending performance (full working width) 7 mm from pipe diameter 280 mm Standard equipment: Iodpecuxp Tsfx Ahyjal Double linear guide system for the roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls cone bending device Safety trip wire with emergency stop and CE certification Mobile control panel

Condition: new, functionality: fully functional, Year of construction: 2026, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Sheet thickness bending at 750 mm diameter 4 mm Iasdpfjcuxpqsx Ahyol Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Machine with CE certification and documentation