Roller conveyor

Transnorm 3900-700-655

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: Kfsdpfeqt Dmysx Agzsa - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, functionality: fully functional, machine/vehicle number: V101VVNG4003ESGR0ZL180W, Year of construction: 2023, !! We would be happy to advise you !! Production orientation ////: Vertical Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 20-60 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 210 kg Kfodpfx Agoq Ikg Djzoa System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: approx. 1500 x 960 x 1120 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer holder ////: matching ink wheel printer optional for an additional charge of EUR 1200 Delivery time ////: Current delivery time under 10 weeks Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Print mark sensor included • Automatic stopping for empty products (no product - no bag) • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Gassing units for protective atmosphere (extend product shelf life) • Length-dependent product processing using photocell query

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, cutting height (max.): 250 mm, working height: 850 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC crosscut saw UKS 1.000 Cross cuts: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Max. cutting height: 260mm Saw blade: 700mm Kjdpfx Asrfudregzsfa Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Year of construction: 2017, condition: good (used), Loma IQ3+E Metal detector checkweigher Kedpfx Aeual Amjgzefa 2017, Stainless, overall belt dimensions 1600mm x 330mm, aperture 450mm L x 225mm W, AIC checkweigher 250g -3500Kgs, mobile, 1Ph

Condition: used, Year of construction: 2022, Overview  The filling machine Flowmeters 8 was built in 2022 by Polish manufacturer Perunpack. The machine was only tested, is still under power and can be viewed in person at any time.  Technical Details  Capacity: 800-1000 bottles per hour for the 5 l format Machine can fill containers from 150 ml to 6000 ml. Number of filling stations: 8  Diameter of fillers: 16 mm Machine can fill thick products and typical water  Measurement system is based on Keyence flow meters, special flow meters for dosing machines Machine is equipped with a pump with an elastic rotor that doses the medium into a pressure tank and then onto the fillers. Entire machine is made of 304 stainless steel Siemens control system. Filling from the bottom of the container. Lowering and raising the boom with fillers using a servomotor    Kfedpjrziuyofx Agzoa

Year of construction: 1985, condition: excellent (used), machine/vehicle number: (20020324 EG) - VK-RES, DEMAG KBK crane canopy crane runway with dimensions approx. 16.5 x 7 m (7 m bridge - double-girder crane) Payload / lifting capacity 500 kg - 0.5 tonnes Technical specifications of the system: Crane runway made of Demag KBK2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable tray, brackets/suspension, etc. Incl. Demag PK2 500 kg chain hoist - lifting height approx. 4.5 m Crane is disassembled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or pickup by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also in stock. Payload 125kg - 1600kg Kfsdpfx Agsty S I Eezoa Please inquire about your crane runway, including load capacity and dimensions, without obligation.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Kodjfr T Emepfx Agzsfa Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2023, condition: new, TNDG manual positioner by handwheel and clamping pneumatic. Measurement display per linear encoder and digital display Available in dimensions 3,4,6 and 8 meters Working height: 800-1050 mm Permissible load 70 kg / meter Ksdjpa Nzyjpfx Agzsfa Roll dimension 40X300 mm PACKAGING AND DIMENSIONS: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg)

Condition: used, Technical data: Max saw diameter: 600 mm Min saw diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Max cutting height: 210 mm Max saw blade advance width: 500 mm 2 pneumatic clamps Extraction spigot diameter: 155 mm Work table dimension: 790x910 mm Power supply: 400 V Kodpfx Agsri Si Djzsfa Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm

Year of construction: 2008, condition: excellent (used), Piston filling machine Make: EFM/LVS Type: 2 station piston fillingmachine with heatable funnel with agitator Capacity: max 3000/hr Range: 200ml-1000ml (easy manualy adjustable) Dimensions: L x B x H = 1.700 x 1.100 x 1.900 mm Kfodpfx Aeigytisgzoa Electro: 400 Volt - 50 Hz - 0.75 kW(agitator) compressed air: minimal 6 bar Features: Pneumatic driven filler/ Logo Plc/ Mobile Machine can be optional be delivered with conveyor system with peumatic starwheel for positioning