Used Linematic Maschine for sale (1,422)

Condition: good (used), functionality: fully functional, color: green, Year of construction: 2008, operating hours: 1,000 h, The machine is being sold complete, including belt conveyor, handling unit, filling plant, and RC sack palletizing system. Comprises: Bakomat 4B handling unit, 10m³ hopper, conveyor trough type FR 600 x 1650, belt conveyor BTL 500x42,525, year 2005, belt conveyor BTL500/2/24-5.5m, year 2005, belt dosing scale Chrotec, vertical form-fill-seal machine Binder und Co, MK-X, 400 bags/hour with 25kg bags, approx. 13,000 operating hours, year 2005, sliding conveyor PD 2455/600, RC robot cell by Packmann d.o.o, year 2005, complete Kuka KR200 2E robot, robot year 2000, approx. 5,000 operating hours, pallet wrapping machine Plator LCN. All existing plans related to dimensions and further information are available in the attached PDF. Products produced: - Fine chippings 1-2mm - Fine chippings 2-4mm Rjdpsvw Urwjfx Ab Ujr - Chippings 4-8mm - Premix chippings/sand - Play sand 0-2mm - Washed sand 0-4mm - Scented play sand - Concrete gravel 0-16mm - Rounded gravel 8-16mm

Condition: used, We offer a board stacking machine. The stacker features a separating device and a powered roller table for pre-made packaging. More than half the width is in like-new condition, as only 120 cm wide boards have been stacked. Machine width: 4.30 m Machine length: 7.50 m Rsdpfxjyh U I Ij Ab Uor The entire system corresponds to the foto

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2311151630, turning diameter over cross slide: 650 mm, spindle bore: 153 mm, turning length: 3,150 mm, turning diameter: 650 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 410 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed length X-axis: 330 mm, feed length Z-axis: 3,150 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 6,261 mm, total width: 3,588 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 18,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 230 V, drill spindle diameter: 153 mm, nominal power (apparent): 21 kVA, number of spindles: 1, spindle nose: A2-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 149,500.00!!!!! Rsdsx Akm Repfx Ab Ujr The machine is new and immediately available. Subject to prior sale. Including hinged belt chip conveyor. Delivery of the machine in export packaging ex our warehouse. (Shipping costs to be borne by the buyer) Operating fluids to be supplied by the buyer. Commissioning and training by Milltronics possible. Leasing available (subject to credit approval) Machine details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automated processes • Custom macros available • Override potentiometer for axes and spindle • Spindle load monitoring • Key switch to lock the EDIT function • Indicator lights for operating status • Additional "M" function with CNC dwell channel • Constant cutting speed • Rigid tapping • Spindle speed 30 - 1600 rpm • Spindle motor 18 / 11 kW, 2-speed electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 stations, 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One boring bar holder 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list, and wiring diagrams in digital format • Operation and maintenance manuals in digital format • Transformer for standard industrial power, 400 volts, 3-phase • Lifting brackets for craning the machine Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in conjunction with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic power unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Follow steady rest with brass supports, range 20 mm – 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Floor mat with Milltronics logo

Condition: used, Year of construction: 2009, functionality: fully functional, Kalmijer KGM biscuit machine with 2 biscuit rollers: Spekulatius and Kipfel. Comes with 10 baking trays. The machine has been overhauled. Stainless steel frame on castors. Equipped with heating for the rollers. Tray width: 25 cm; tray lengths: 1 m, 80 cm, and 60 cm. 16A connection. If you have any further questions, please contact us. Thank you in advance! Rsdpew T Rxcjfx Ab Uor

Condition: new, Self-priming eccentric screw pump mounted on a running gear incl. 2/3 hose screw connection with locknut MG90/65 nozzle VA and 2/3 hose screw connection with locknut DN65/65 nozzle VA. Specifications: capacity 4 020 / 8 160 l/h power: Rjdpfxjb Nvb De Ab Ujr stage 1 1,0 (1,36) kW (PS) stage 2 1,9 (2,6) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 270 mm width 500 mm height 810 mm weight 57 kg material 1.4301 / AISI 304 connections: in the front MG90 AG on the top DN65 AG suitable for mash

Condition: new, Year of construction: 2024, Grinding wheel DxB 455 x 255 mm workpiece diameter 1-60 mm, control disc DxB 255 x 255 mm, disc speed 10-100 rpm, power SS 11 kW, weight approx. to 3.7, size approx. 2,700 x 1,700 mm Machine is suitable to the pass and feed grinding, hardened and ground Guide Rodpfx Ajdlgq Ueb Uer pave grinding and control spindle with hydrodynamsicher three-point bearing, lubrication for carriage and delivery spindles, rule discs powered by DS engine, frequency controlled, hydraulic dressing equipment for grinding and rule disc. Equipment of electrical, predominantly with Siemens components, electrical cabinet in Germany built up, GC 1810-NC stepper motor with Siemens S7 control for grooving and extra movement. Very economic price / performance ratio

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Rodeyq Hgkopfx Ab Uor Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: used, Year of construction: 2012, Air Cushion Machine Fromm Airpad Machine Manufacturer: Brüninghaus Model: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min (depending on film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions (LxWxH): 1,600 x 767 x 1,292 mm Weight: 230 kg Rsdpfxjwulylo Ab Uer Accessories / Special equipment: • Stored programs for various cushion sizes • Program change at the press of a button • Individual production from 4 cm to 16 cm length with defined filling degree • 10 programs available for storing multiple parameters

Condition: used, Year of construction: 2012, operating hours: 5,598 h, Bomag BW213PDH-4 roller from year 2012 with only 5,598 operating hours! ----* Manufacturer: Bomag * Model: BW213PDH-4 * Year of manufacture: 2012 * Displayed operating hours: approx. 5,998 * Operating weight: 13,100 kg * A/C – air conditioning * German machine * 119 kW * Deutz diesel engine * Additional photos and video available upon request * Price: €42,900 net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp Rsdpfx Asyt Uirob Uor All information subject to change and prior sale. No guarantee or warranty provided.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW NEW Bag/Packet Closing Machine NEW NEW Model: TK 18 Automatic and Manual function Clipband machine with date printing Stainless steel construction Operable by one person Suitable for packing baked goods such as bread, sliced bread, rolls, croissants, etc., as well as other food and non-food products Connection: 230V Dimensions: 740 x 700 x 1050 mm Brand new machine with warranty and spare parts service Rodpfxsw S Slhs Ab Usr Quality from a specialist workshop! Benefit from over 35 years of experience! Options: Clipband Maintenance contract Service package Delivery service Instruction & commissioning Visit our large showroom!

Condition: used, Year of construction: 2016, Equipment: all wheel drive, Liebherr L 538 Z 2plus1 Top condition, original paint Year of manufacture: 2016 VIN: VATZ1559KZB044515 Operating hours: 14,665 Machine handover on 19.01.2017 All services performed by Liebherr and documented. Last service at Liebherr on 20.06.2024 at 14,138 hours 4-cylinder inline engine, water-cooled with turbocharging Emission Stage IV, 155 HP Hydrostatic drive with 3-speed transmission, speed limited to 20 km/h, up to 40 km/h possible (currently 36 km/h) Air conditioning!!!! * Automatic central lubrication system (factory-installed by Liebherr) * Rear area monitoring with camera (function not tested!) * Ride control (boom suspension) * Steel lamp brackets instead of plastic * Fuel pre-filter * Climbing aid for easier cleaning of the front windscreen * Opening window in driver’s door * Premium touchscreen display * “Comfort” driver’s seat with pneumatic suspension (with seat heating) * Liebherr control lever (joystick) * Adjustable steering column * 4 working lights on the front cab roof * 2 working lights on the rear cab roof * Automatic bucket return * Reversible fan (for blowing out the radiator package) * Fluff filter in front of radiator package to prevent contamination * Pre-separator for engine intake air (TOP-AIR) * Beacon light preparation rear cab center * Audible reverse warning system (buzzer) * Radio preparation Rsdpfsyqn Hrjx Ab Uor * Road approval possible!! Tyres 20.5 x 25 L3 – front axle 2 x 30% Tyres 20.5 x 25 L3 – rear axle 2 x 30% Net price with fixed 2.5 cubic meter bucket: €44,900 Available for extra charge: • Hydraulic quick coupler: €3,550 • High-volume bucket 4 cubic meters: €4,500 • Pallet fork 5 or 8 tons from €2,190 Available optionally with scale, e.g. used Pfreundt WK50 - WK60 scale from €3,900 All prices + 19% VAT or for export. Sale only to business customers or for export. Sold as seen, in as-is condition. No warranty or guarantee. The stated kilometer or operating hour readings are taken from the meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer; the information provided is not to be considered guaranteed features. The description and information are for general vehicle identification only and do not represent a warranty in the sense of purchase law. The information does not claim to be complete. The details/descriptions and images are non-binding and not guaranteed features. Only the specifications in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typing or data transmission errors. The seller has not inspected the machine. Equipment must be checked separately.

Condition: new, Year of construction: 2026, CNC 1212INDUSTRY 2.0 6kW 1200x1200 milling machine with Becker KVT 3.140 vacuum pump Rodpjtu H Tusfx Ab Ujr The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1200 x 1200 mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Technical data: Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in free runs: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1200x1200x300mm - Hybrid table (vacuum + T-slot) Control: NK-105 G2 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Weight: approx. 650kg Dimensions: For transport - 220 / 190 / 220 Machine assembled and ready to work - 220 / 225 / 230 Standard equipment Hybrid table, i.e. vacuum table enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Central oil lubrication system for trolleys and guides as standard equipment Drive transmission is carried out via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, spindle speed (max.): 36,000 rpm, spindle speed (min.): 1,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composites such as CFRP/GFRP, model building materials, aluminum Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Reference number: 1218 Availability: March 2026 Rodpfexdwndsx Ab Usr Model: 5-axis CNC milling system RT-F 1400 Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 40/40/30 Workpiece dimensions X/Y/Z: 1000 x 800 x 400 mm Control: SIEMENS – Sinumerik One with HT 2 Tool changer: 12 tools Tables: 1 rotary table Tool breakage and length control: Renishaw TS 27 R Other features: Chip tray, anti-slip perforated tread plate Year of manufacture: 2026 Condition: new

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R Redpfx Abox S Etmj Ujr - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Rsdpfx Abji Eb Dre Usr

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Rjdpfji Eb Dnjx Ab Uer

Condition: ready for operation (used), INA YRT F-229093 Radial bearing for Supfina machine, the item has been overhauled, used, good condition, 100% working, scope of delivery as per photos Rsdpfxoulqh Ho Ab Ujr

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Rodpfxsng Exaj Ab Ujr Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: V00311, functionality: fully functional, input frequency: 63 Hz, total length: 4,581 mm, total width: 1,093 mm, total height: 1,372 mm, working width: 1,100 mm, workpiece weight (max.): 2,500 kg, ECO-63 was designed for bending round, square and oval tubes and profiles. The standard programming of the ECO-63 comand comprises 15 different programs, each one, Rodpfxowczf Hj Ab Ujr comprising up to 15 different angles.

Year of construction: 2023, condition: new, GRS 14 Cable Stripper Machine Power:380V/15KW/50HZ Diameter of cable to be processed：φ30mm～φ200mm Stripping Thickness:≤50mm Processing Speed:max.18m/min Rodpfx Ajmcbl Iob Uor Net Weight:1200Kg Gross Weight:1350Kg Machine Dimensions:1620mm*1000mm*1700 mm（L*W*H） Package Dimension:1750mm*1130mm*1900mm（L* W*H）

Year of construction: 2023, condition: new, Cable stripping maschine ,wire stripper Technical Data: Dimensions: W / H / D 75 cm / 68 cm / 86 cm Weight: app. 95 Kg Rjdpfok Ra Tujx Ab Uor Color: blue / yellow Cutting speed: app. 48 Meter per Minute Engine: 230V / 3000 W

Condition: new, Year of construction: 2025, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 800 mm, 🚀 EMO Show Highlight: VM2000 Gantry Milling Machine 🚀 – Precision. Performance. Immediately Available. Our CNC gantry milling machine VM2000 will be demonstrated live at the upcoming EMO trade fair – giving you the unique opportunity to secure this model directly from the show at a special price! Rodjw N I A Dspfx Ab Uor 🔧 Technical Highlights: ✅ Travel range: X 2000 mm / Y 1300 mm / Z 800 mm ✅ Spindle: HSK A63, 15,000 rpm, 38 kW peak power ✅ Table size: 1650 × 1300 mm, load capacity up to 4000 kg ✅ Precision: Positioning accuracy P0.012 mm ✅ 24-position tool changer for maximum flexibility 💡 Perfect for tool & mold making, automotive, and aerospace industries. Further specifications attached and below: Category Value Control FANUC 0i MF Plus X-axis travel 2000 mm Y-axis travel 1300 mm Z-axis travel 800 mm Spindle nose to table 235–1035 mm Column distance / max. workpiece height 1820 / 1000 mm Table size (L×W) 1650 × 1300 mm Max. table load 4000 kg T-slots (width × pitch × qty.) 22 × 180 × 7 mm Spindle taper HSK A63 Max. spindle speed 15000 rpm Spindle power (cont./max.) 15 / 38 kW Max. spindle torque (cont./max.) 70 / 149 Nm Rapid traverse X/Y/Z 20000 / 20000 / 12000 mm/min Feed rate X/Y/Z 1–10000 mm/min Motor power X/Y/Z 4 / 9 / 9 kW Tool changer type Arm Tool positions 24 Max. tool diameter φ75 / φ130 mm Max. tool length 300 mm Max. tool weight 8 kg Positioning accuracy P0.012 mm Repeatability Ps0.010 mm Air pressure 0.6–0.8 MPa Coolant flow 99 L/min Power supply 3/PE, AC380V, 50Hz Power consumption 60 kVA Machine dimensions (L×W×H) 5000 × 4910 × 4600 mm Machine weight 21000 kg Main Features 1 FANUC 0i-MF plus absolute, type 0 system, 15-inch color LCD 2 iHMI + manual I 3 Max.1500, min.400 block look-ahead 4 Data server (2GB) 5 Fast Ethernet card 6 Straightness compensation interpolation 7 Custom operator panel 8 Rigid tapping 9 Transformer 10 Work area lighting 11 3-color signal beacon 12 Portable MPG 13 Automatic power-off 14 Safety door interlock 15 Foot switch and tool release button 16 Coolant tank level monitoring 17 Direct-drive spindle HSK A63, 15000 rpm 18 Spindle oil chiller 19 Air blow for machining 20 Coolant system 21 Spindle air seal 22 Air gun / water gun 23 Grease lubrication system 24 Pneumatic system 25 Full enclosure 26 Electrical cabinet air conditioner 27 Swiveling control cabinet 28 Separated cabinet for high & low voltage 29 Hinged chip conveyor 30 Adjustable leveling pads & foundation blocks 31 Tool kit 32 Operating manuals 33 Spiral chip conveyor 34 Operation manual 35 Spiral chip conveyor 36 CTS, 20-70 bar, including through-spindle air 37 Oil separator (Chinese brand) 38 Arm-type ATC, 24 tools 39 FAGOR absolute linear scales on X, Y, and Z axes 40 Encapsulated iron package 👉 Get more info & secure the special price: New CNC Gantry Milling Machine Skymaster VM2000 – Kraft Werkzeugmaschinen

Condition: used, Leistung: 500-800 Fl./Std. Luftverkehr: 8 m3 Rodpfx Abox Itvzj Ujr Luftdruck: 6 bar

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. Rsdpfjwbixrex Ab Uor ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Rsdjwbh Ifspfx Ab Ujr Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.