Horizontal foam splitting machine, foam cutting machine.
Machine based on SKF and Siemens parts. Control from Siemens,
Touch screen, PLC.
Machine equipped with a suction table, which allows cutting of a lot
lightweight materials. Very good quality and very intelligent concept of the
Machine leads to a solution never seen on the market - it is
a machine that does not need any spare parts - except for knives and
Grindstones. The specially developed knife guide and suction table
enable the cutti...
Rotary table system RT14 meter
- Steel construction / rotary table platform
- Drive unit
- Energy supply system
- Supply units with ring line
Round table diameter: 14 meters
Upper edge of the rotary table platform: approx. 450 mm
Set-down weight: max. 50,000 kg
Cover of the rotary table platform: chequer plate
Track rollers: Steel rollers
Painting/coating: according to customer requirements
Skid mounted. Size 65/65; Max pump output 65cm3 (Polyol/Isocyanate); Total output 130 cm3; Tank sizes 60/250; Connected load 15kw; Net wieght 1550kg. Pressure vessel type 9576-101. Inside desigh pressure 4 bar. Usable max volume 240L. Operating medium Fluid group 1 Water / Oil. Disconnected,
Dekumed Unidos 300 TXMP 2K-Dosiermischanlage, control Siemens Simatic PLC S7, year 2016, high pressure gear pumps for epoxy resin and hardener, 2 stainless steel tank 400 L for epoxy resin adhesive and hardener, heaters for both component container, Dosiermischkopf,. Compressor, cable reel 70 m, control cabinet, jib 4 m swivel, with plant built steel frame, heavy duty casters, drawbar
Dekumed Unidos 300 TXMP tr. supply for mixing plant, built in 2016
Pumps for epoxy resin and hardener, pr...
with inserter dripping system in automatic. Brand: TRIMEC. Year: 1994. Compounded of:
A- Extruder, brand: TRIMEC, model: TM 75/30D. Engine: 57.5 kw . Charger over hopper.
B- Pipe head.
C- Charger pieces to the dripping system with accumulator tank and insertion the pieces to the dripping system TRIMEC.
D- Vacuum stainless steel tub and calibration: 5 meters VC/1.
E- Cooling stainless Steel tub: 5 meters long VR/1.
F- Cooling stainless Steel tub: 5 meters long VR/1.
G-Drilling interline with guil...
HENNECKE METERING MACHINE PUR TOPLINE HK 65 \ 65\MN, FOR TOP CLASS HIGH PRESSURE POLYURETHAN PROCESSING, FOR FOAMING OF POLYURETHANE RIGID FOAM SYSTEMS A: B RATIO from 1: 1
PRODUCED BY THE GERMAN COMPANY HENNECKE GMBH
250 L TANKS FOR RAW MATERIALS
We purchased the machine for PU production by Hennecke Polyurethane Technology in a dosage ratio of 1: 1
It is a high-class metering machine from the TOPLINE series. Metering machines of the TOPLINE series have always been
a synonym for t...
Automatic vertical foam cutting machine with 2 side gauges. Siemens Simatic control, 2 years warranty.
Special offer price - the machine is new on the market, that is why we offer this machine at a very low price. Similar machine from Fecken-Kirfel or Albrecht Baeumer is twice as expensive.
Data of the machine:
Cutting length: 250cm
cutting height: 125cm
Table left and right of the knife: 230cm
Motorized blade guide
Two side gates, left side can be folded down pneumatically
KraussMaffei color metering Type: CD 0.6
==== 2 PIECES AVAILABLE ====
- Colour: 0,6 l
adm. operating pressure 250 bar
Component/hydraulic ratio 1:1
Air-operated piston pump type PPG 4
Container size 0.4 l
Proportional hydraulics for ink metering:
Drive power 1,5 kW
tank capacity 63 l
Delivery rate 3.6 l/min
Operating pressure 230 bar
Safety valve 230 bar
Operating voltage 380 V, 50 Hz
Valve voltage 24 V DC
Vertical CNC foam cutting machine for different types of foams, isolation materials, etc. Very good condition. Machine will be renewed and will have a new steering system based on Mach 3 free software, new servo motors, etc. The machine is then actually like new. We will answer your questions with pleasure if you are interested.
The compression cutting machine, similar to Fecken-Kirfel D5 can, for example, cut different shapes made of PU foam (polyether and polyester), rebond foam, and similar deformable materials using compression. Three-dimensional symmetrical and asymmetrical molded parts can also be produced quickly and economically. This compression cutting machine is mainly used in the production of upholstered and office seats, as well as in the automotive and aviation industries
Horizontal carousel foam cutting machine. Technical description:
Table diameter: 7,2m
Cutting height - 1,25m
Cutting width - 2,30m
Machine equipped with vacuum table, for easy cutting of light material. Thanks to the table and special blade guide, it is possible even to cut basotect foam from BASF. Machine produced on customers order Deivery time about 10 weeks. Installation costs to be discussed.
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not assume liability for the content of linked external websites.