Used Foam for sale (421)

Year of construction: 2016, condition: good (used), functionality: limited functionality, The machine has been disassembled. It was in working order before disassembly. I have a video recording from before the disassembly. Sold as is, with no warranty or guarantee. Dcedpfx Ajz Iw I Aecpen

Year of construction: 1995, condition: used, Foam cutting machine, as shown in the pictures. Stored in a warehouse – under a roof. Disassembled. Sold without any warranty or guarantee. If you have any questions, I can send more pictures and dimensions. Dcodpfx Aoz Iy Dgocpjn

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Production line units: 1. Zhejiang Baina 150 20D 1000Kg/h cold feed vacuum extruder (Standard) 2. Zhejiang Baina EJ-PPF-150-04-00 conical die (Pneumatic) 3. Zhejiang Baina 6m infrared curing oven (width 1000mm) 4. Zhejiang Baina 6m hot air curing oven (width 1140mm) 5. Zhejiang Baina 6m hot air curing oven (width 1440mm) 6. Zhejiang Baina 6m hot air curing oven (width 1600mm) 7. Zhejiang Baina 6m hot air curing oven (width 1800mm) 8. Zhejiang Baina 6m hot air curing oven (width 2000mm) 9. Zhejiang Baina 6m hot air curing oven (width 2300mm) 10. Zhejiang Baina 6m hot air curing oven (width 2500mm) Dcjdjy Exrpopfx Acpsn 11. Zhejiang Baina 6m hot air curing oven (width 2800mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3 layers * 12m) cooling system 13. PCM automatic longitudinal and transverse industrial cutting machine 2000mm 14. AC-15AD liquid chiller with 285 liters water tank If you are interested, we will send you a detailed description and data.

Condition: used, Krauss-Maffei Door Foaming Carousel (Unused), Wet Box System, Fixture Dimensions Length x Width x Height 2300/950/200mm, Cycle Time 12 Seconds, 24 Foaming Fixtures, 2 x Mixing Heads, Mould Change Over/Storage System, ABBiRB 6700 Loading & Unloading Location: These lots are located in Porcia, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dcodpfez I S Dfox Acpsn

Year of construction: 2016, condition: good (used), functionality: fully functional, For sale: a fully functional hammer mill, brand ROBEX - DPH22KRL, with a belt conveyor. Year of manufacture: 2016. Mill motor power: 22 kW. Dodpszwwvhofx Acpecn If interested, please provide your contact details in your inquiry.

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Dcjdpfxeywpcps Acpsn Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, The Nordson FoamMelt 200 (FM 200) is a specialized dispensing system that mixes hot melt adhesives with an inert gas (such as nitrogen) to create a closed-cell foam. This process reduces adhesive consumption by as much as 50% to 65% while improving bond performance. Applications: Widely used for bonding, sealing, gluing, and gasket making (gasketing) in the automotive and packaging industries. Dedpfx Aey N Ahcocpscn Benefits of FoamMelt Technology Faster Curing: The foam cools down faster, enabling higher production speeds. Better Filling Properties: The volume increase due to gas makes it ideal for filling gaps. Improved Safety: The lower heat density of the foam reduces the risk of burns for operators.

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type Dedpfx Ajcr Ru Docpjcn negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Condition: excellent (used), Year of construction: 2007, Laboratory foam dispensing station with foam mixer and applicator Djdpju D E A Dofx Acpscn The system works similarly to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Formulations are stored in the control unit and can be adjusted during operation. Foam applicator with mixer • Dynamic foam mixer with online dosing of 5 products + water • 5 dosing pumps • Direct inlet for the mixture • Product monitoring of the chemicals • Air dosing valve • Dynamic foam mixer with adjustable speed • PLC control • Foam applicator • For one-piece carpets up to 1 m wide Application areas Stain protection agents Dirt, water, and oil repellent agents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and insect repellents Pile stabilizers Agents against hair loss Resins for wrinkle prevention and dimensional stability Specification Foam density: 20–100 g/l (higher density at lower flow rate) Dosing range: 0.5–500 g/l (1:100 per pump) Foam volume: 50–500 l/min Electrical data Connection power: 6 kVA, 10 A Mains voltage: 400 V / 50 Hz Control voltage: 24 V Dimensions: H × W × D = 1400 × 2100 × 860 mm Year of manufacture: 2007 Purchase price: €47,600 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2001, functionality: fully functional, P3 foam cleaning system for rinsing and filling machines Pumps and valves Attached stainless steel cabinet with Siemens S7 control system Special price due to stock clearance: €4,200 Dcodpsww Hnvjfx Acpon

Condition: used, mileage: 17,025 km, power: 110 kW (149.56 HP), axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total length: 55,000 mm, total width: 23,700 mm, total height: 28,500 mm, Year of construction: 2005, Equipment: ABS, For inquiries regarding the vehicle, please contact Mr. Seidel (at the following telephone number). MAN LE 8.150 4x2 fire engine 2,500-liter foam tank Cruise control, engine brake, ABS/ESP/ASR, auxiliary drive, halogen headlights, additional roof-mounted headlights, rotating beacons, air horns, Rockinger trailer coupling (40 mm), tire tread: 1st axle 12-13 mm, 2nd axle 12-15 mm Permissible total weight: 7,800 kg, unladen weight: 4,610 kg, payload: 3,190 kg Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. You can find more information on our website. ... Errors, changes, and prior sale reserved!!! ESP Dedpfx Acozhzt Eepocn Cab: For local transport = Further information = Engine displacement: 4,580 cc GVW: 7,800 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2021, A PUR foaming system with Yaskawa industrial robot is offered. Min. dispensing rate: approx. 0.15g/s, max. dispensing rate: 1.6g/s, material system: polyurethane Penguin Foam 3151/3157, drum capacity: 200l, operating voltage: 3 × 400V/N/PE, frequency: 50Hz, control voltage: 24V DC, upstream fuse: 16A. Approx. 30000 assemblies were foam-applied using the system. The system was shut down in 2024 according to the manufacturers instructions. Documentation available. An on-site inspection is possible. Dcodjzvy Ecspfx Acpon

Condition: used, mileage: 17,656 km, power: 110 kW (149.56 HP), axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total length: 55,000 mm, total width: 23,700 mm, total height: 2,850 mm, Year of construction: 2005, Equipment: ABS, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at ). MAN LE 8.150 4x2 fire engine 2,500-liter foam tank, cruise control, engine brake, ABS/ESP/ASR, auxiliary drive, halogen headlights, additional roof-mounted headlights, all-round warning lights, air horns, Rockinger trailer coupling (size 40), tire tread depth: 1st axle 12-13 mm, 2nd axle 13-15 mm, permissible total weight: 7,800 kg, unladen weight: 4,610 kg, payload: 3,190 kg. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale are subject to change without notice!!! ESP Cab: Designed for local transport = Further information = Dedpfozf Ul Nox Acpocn Engine displacement: 4,580 cc GVW: 7,800 kg Please contact Tobias Ebert for further information.

Condition: used, mileage: 10,616 km, power: 110 kW (149.56 HP), axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total width: 23,700 mm, total height: 28,500 mm, Year of construction: 2005, Equipment: ABS, EBS, For any inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (Tel. ...). MAN LE 8.150 4x2 Firefighting Vehicle Body: 2500 F, 2,500-liter foam tank, Schmitz: SLF 25/25, number of seats 3, manual transmission, cruise control, engine brake, ABS/ESP/ASR, PTO, halogen headlights, rotating beacons, 40 mm Rockinger coupling, tire tread: 1st axle 12-13 mm, 2nd axle 13-14 mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. You can find more information on our homepage. ... Errors, changes, and prior sale reserved!!! ESP Cab type: Short-haul = Further information = Engine displacement: 4,580 cc Djdpfey Ivq Uox Acpjcn Gross vehicle weight: 8,600 kg Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3542, conveyor belt length: 2,200 mm, conveyor belt width: 2,200 mm, conveyor belt speed: 116 mm/s, total length: 4,000 mm, total width: 4,000 mm, total height: 4,500 mm, overall weight: 4,000 kg, discharge height: 3,500 mm, power: 7.2 kW (9.79 HP), type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, pivoting range: 90 °, Equipment: documentation/manual, We offer the following used D.B. S.R.L. PCLO 2200 contour foam cutting machine, manufactured in 2007. Manufacturer: D.B. S.R.L. Model: PCLO 2200 Year of manufacture: 2007 Condition: used Category ID: 34 Type ID: 3028 Dsdpex T Ax Njfx Acpscn Type: Contour Foam Cutting Machine If you have any questions or need more information, please send us a message or call us.

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Dsdsz Eq Epopfx Acpocn Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Year of construction: 2017, condition: ready for operation (used), A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible. Dodpfx Acox A Hg Hopecn

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,592 h, power: 58 kW (78.86 HP), lifting height: 40,150 mm, fuel type: diesel, Equipment: all wheel drive, GENIE S-125 telescopic boom lift with a working height of 40.15 meters! Year of manufacture: 2011 According to the meter reading: 5,592 hours 🏗️ Performance data & working range • Max. working height: 40.15 m • Max. platform height: 38.15 m • Max. lateral reach: 24.38 m • Max. reach below ground level: 3.27 m • Platform load capacity: 227 kg (unrestricted) • Turret rotation: 360° continuous • Length of the boom (Jib): approx. 1.52 m 📐 Dimensions & weight • Operating weight: approx. 20,248 kg • Transport length: approx. 12.19 m (with retracted boom for transport) • Transport width (axles retracted): approx. 2.49 m • Working width (axles extended): approx. 3.35 m • Transport height: approx. 3.07 m • Platform size: 2.44 m x 0.91 m ⚙️ Drive & chassis Dcodpsz Ndycofx Acpon • Engine options (diesel): Deutz TD 2011 L04i (74 hp / 55 kW) or Perkins 804D-33T (83 hp / 62 kW) • Fuel tank capacity: 151 liters • Hydraulic oil tank capacity: 208 liters • Drive / steering: 4WD (all-wheel drive) & 4WS (all-wheel steering with crab steering) • Gradeability: 40% • Tires: Foam-filled rough terrain tires - Ready for immediate use in original condition! - Good tires! - Well-maintained machine! - Includes CE certification! - On request: new Austrian inspection certificate provided before delivery! Selling price: 28,900.00 EUR net Delivery possible!

Condition: like new (used), Year of construction: 2018, Type: Vertical cutting machine for foam and similar materials Manufacturer: Albrecht Bäumer Designation IS/M-3 Year of construction: 2018 Dimensions: Table left of the measuring sensor 2500 mm Table to the right of the measurer 2200 mm Cutting length 2500 mm Cutting height 1300 mm Side stop right 1200 mm Dcsdpfer H D Tuox Acpon Side stop left 1200 mm foldable motorized grinding unit height-adjustable blade guide Pneumatic blade clamping Info: Little used vertical cutting machine ISM-3 from Bäumer. Simple operation and very reliable machine with state-of-the-art technology The machine is equipped with B-Con (used for remote maintenance by the manufacturer via the Internet) The machine is still in use and can be inspected by appointment. Available immediately Disassembly and transport to be organized by the buyer. Location NRW district of Lippe Further information on request (please only in writing)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, number of ink cartridges: 26, color channels: CMYK + White + Varnish, number of print heads: 6, resolution (max.): 1,200 dpi, paper width (max.): 3,200 mm, paper height (max.): 50 mm, total width: 3,200 mm, counter reading (color): 1,328, year of last overhaul: 2025, type of input current: AC, input current: 15 A, input voltage: 240 V, We offer this used Liyu DSJ3204 UV HYBRID Digital Print Machine, year of construction 2022. Model number: DSJ3204 Year of manufacture: 2022 Serial number: M33DB0012C0E0 Net weight: 2400 kg Voltage: 200-240 V Current: 15 A Power consumption: 3300 W Frequency: 50 Hz Country of origin: China €63,900 including dismantling at our location and setup at the buyer's site by manufacturer Liyu Price is subject to negotiation (Transport to the customer and unloading at the customer's site are to be organized and are the responsibility of the customer/buyer.) Liyu Platinum EQ3 LED Hybrid Flatbed and Roll-to-Roll UV Printer Condition: Lightly used and in excellent condition Flatbed and roll-to-roll printing INCLUDES 3 mm aluminum composite panels 3050 mm x 1500 mm approx. 24 pieces INCLUDES 3 mm foam board 3050 mm x 2030 mm approx. 160 pieces Includes 26 unopened 1-liter bottles of UV ink Printed output approx. 1328 m² as of May 6, 2026 The Platinum EQ3 hybrid printing press is a state-of-the-art machine that meets the demands of modern printing. Djdpjy Nl E Refx Acpjcn This machine boasts a wide range of features that enable users to complete their tasks more efficiently. The convenient dual-sided material feed accelerates the workflow and saves time and effort. Furthermore, the 4-zone vacuum system ensures that the material is securely held in place – resulting in higher print quality and a reduced risk of material shifting. Collision and safety sensors play a crucial role in workplace safety. They detect potential collisions and protect both the operator and the machine. The Platinum EQ3 Hybrid can print on materials up to 50 mm thick, opening up a broad range of application possibilities. This flexibility allows for the processing of a variety of materials for diverse projects. The automatic material height measurement system facilitates the precise adjustment of material parameters for accurate printing results. This feature not only improves print quality but also reduces material waste. Number of printheads: 6 RICOH GEN6, 6pl Printheads can be upgraded by speed up to 16 printheads. Inks: Currently CMYK, White, Vanish Print resolution: 1200 dpi Print speed (maximum): 180 m²/h Flow height: 50 mm Color gamut: CMYK + White + Light + Luminaire + Varnish Ink types: UV LED Drying system: UV LED Accessories: Includes inks (Cyan x 1, Magenta x 3, Yellow x 1, Black x 3, White x 2, Varnish x 3, Cleaning Solution x 3, each in 1-liter containers) and cleaning wipes. Further pictures and videos available upon request. For greater distances, a viewing can also be conducted via live video.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Manufacturer: The Raw Juice Company Model: TOP-21 Year of construction: 2022 year Condition: ready for use / Currently in use Category ID: 310 Type ID: 1066 Machine type: Bottle Filling Machine 60ml - 3000ml This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour If you have any questions or need more information, feel free to send us a message or give us a call. Dcedpfx Ajz D Uuxjcpsn

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 500 kg, Foam clamp Load centre: 1000 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 2A (41 cm) Capacity 500 kg / 1000 mm Opening range 800-2500 mm Sideshift width 1350 mm Clamps 1500 mm ID OS1973 Dcjdpfjyz E Sbsx Acpjn

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, Overview Property Specification Value Capacity 700 Liters (24.7 cu. ft.) Storage Capacity Up to 528 standard 2-inch cryoboxes Temperature Range −86 °C to −50 °C Internal Dimensions (W×D×H) 890 × 605 × 1300 mm Dsdpez Ikq Refx Acpjcn External/Housing Dimensions (W×D×H) 1110 × 938 × 1966 mm (approx. 44 × 37 × 77 inches) Weight 288 kg (approx. 700 lbs) Electrical Supply 230 V, 50 Hz (EU configuration) Noise Level 47 dB(A) Key Technical Features • Thermal Insulation: High-efficiency VIP (Vacuum Insulation Panels) combined with polyurethane foam. • Green Refrigerants: Environmentally friendly R-290 and R-170 natural cooling agents. • Power Outage Security: Long warm-up time; samples remain completely frozen for >30 hours during a system failure or power loss. • Warm-up Profile: Takes 360 minutes to rise from −86 °C to −50 °C without load. • Chamber Configuration: Includes 3 adjustable stainless steel shelves, creating 4 separate inner compartments with insulated inner doors. • Access Control: Ergonomic outer handle integrated with a secure key lock. • Data Connectivity: Built-in USB and Ethernet interfaces to facilitate seamless sample tracking data transfer. • Compliance & Certifications: ENERGY STAR® certified, ISO 14001, UL, cUL, and UKCA marked. Good working condition. Please check out our other listings as well.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system Dcjdpfxsz Dhrqs Acpjn * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Dcodpfxsz E S Hhj Acpjn Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.