Used Foam for sale (400)

Condition: ready for operation (used), power: 205.2 kW (278.99 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2002, From our readily available stock of used vehicles, we offer you: Fire engine HLF 20 ALL-WHEEL DRIVE 4x4 on MB ATEGO 1328 AF General data: • First registration 09/2002 • Mileage: approx. 41,000 km • Unladen weight: 9,460 kg • Permissible total weight: 14,500 kg • New TÜV/MOT inspection Hfjdpfez R S Hzsx An Njn Chassis: • MB 1328 AF 4x4 with 279 hp (205 kW) • Automatic transmission • Twin-tired rear axle Cab: • Standard crew cab (1:7) in RAL 3026 • Crew leader's seat with PA mounting • Shelf instead of operator's seat • Mountings for 2 compressed-air breathing apparatuses facing against the direction of travel in the crew compartment • Mountings for 2 compressed-air breathing apparatuses facing in the direction of travel in the crew compartment Superstructure: • Manufacturer Ziegler • HLF20 superstructure according to DIN • Two generous side equipment compartments • Fold-out steps for side equipment compartments • Mounts for standard equipment • Mountings for 2 additional compressed-air breathing apparatuses • Deployment device for 2 single-person reels Vehicle pump/fire extinguishing agent tank: • Ziegler fire extinguishing centrifugal pump • Foam proportioning system • Water tank 1,400 l • Foam tank 150 l Safety and lighting • Ambient lighting on the superstructure • Pneumatic light mast • Rear warning device We will gladly provide you with a specific offer and give you a detailed presentation of the vehicle at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, functionality: fully functional, mileage: 87,500 km, power: 162 kW (220.26 HP), first registration: 05/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, number of seats: 9, Year of construction: 1998, Equipment: additional headlights, The LHF 16 fire engine was in service at a major airport. The condition is good and it is ready for operation. Hfjdpsy S Thfofx An Nsn The equipment shown in the photos belongs to the vehicle and will be included. Water tank: 1230 liters Foam tank: 130 liters

Condition: excellent (used), For sale: a professional UV-A radiation intensity meter, MAGNAFLUX UVM3059 – used in NDT (non-destructive testing) applications, including penetrant and fluorescent inspections. The equipment is in very good technical and visual condition and is ready for immediate use. • Model: UVM3059 • Manufacturer: MAGNAFLUX GmbH • Power supply: 9 V • Measurement range: 0.5 – 99.9 W/m² • Serial number: 381 • Calibration date: 14.08.2023 • Next inspection due: 2024 • Complete set: original carrying case, foam padding, sensor, documentation on the housing The device is fully functional, the screen operates correctly, and the sensor responds appropriately to UV-A radiation. The equipment is ready for use in a laboratory, workshop, production facility, or for quality control. Hsdpfsz Slg Dsx An Nsfn

Condition: ready for operation (used), Year of construction: 2007, Shredder for plastic 45kw power , can chop foil and other plastic into small chunks , we used for bubble foil and polyethylene foam, and LDPE foil. Hfsdexf Txzepfx An Njn The shredder has also soft start box.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors • Controller: Syntec controller (machine can be moved on-site) • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. Hfjdpfjzv U Tbox An Nen We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting Hsdpfozpy Idsx An Nefn - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: new, I am offering for sale an original, high-voltage traction inverter by Bosch, intended for Volkswagen AG, with part number 95C 907 123 EM27. This is a development component (ETK – Entwicklungs-Test-Komponente) used during research and development work on electric drive systems. Hjdpfx Anez Snd Ss Nofn The unit comes directly from a Bosch/VW development project and is housed in its original Bosch transport case with foam padding. The package also includes the original transport documentation and high-voltage test and inspection reports, confirming that quality control has been carried out. The inverter is responsible for converting direct current from the high-voltage battery into three-phase alternating current to power the electric motor. It is one of the key components of an electric vehicle’s drive system. Technical specifications: Manufacturer: Bosch Project customer: Volkswagen AG OEM number: 95C 907 123 Version: 95C 907 123 EM27 Bosch number: 0437.B00.0LV-01 Development version: C1-Muster 600A ETK Country of manufacture: Germany Included in the set: Bosch high-voltage inverter Original Bosch transport case Foam transport protection Bosch transport documentation Test and quality control reports Condition: 100% technically functional. Very good visual condition. Complete with original documentation and transport case. Sold exactly as shown in the pictures.

Condition: used, Fire extinguisher, foam extinguisher, foam fire extinguisher, fire truck -Manufacturer: Jockel, foam extinguisher, mobile foam fire extinguisher -Type: S 50 J Externa Bio Hfsdpfjrzvw Eex An Nen -Content: 50 liters -Fire classes: A and B -Technical data/test label: see photos -Number: 2x fire extinguishers available -Price per piece -Dimensions: 550/440/H1100mm / 600/450/H1110mm -Weight: 87 kg/pc.

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Hfsdotnz Ttepfx An Nsn Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,600 h, functionality: fully functional, machine/vehicle number: 15243485, type of input current: three-phase, total width: 3,600 mm, total length: 39,700 mm, total height: 1,900 mm, input voltage: 380 V, overall weight: 19,700 kg, The line consists of double decoiler, pre-heating section, set of forming rollers, foaming machine, polymerization bench, cutting system with flying saw, belt conveyor, stacking bench with return and a control panel. The line is equipped with a COMBI system allowing quick profile type changeover. The line produces two profiles: Hfsdpfx Ajzwb D Njn Non 1. H39mm, coil width 120mm, thickness 0.2-0.25mm 2. H45mm, coil width 136mm, thickness 0.2-0.25mm Technical Specifications: - maximum line speed - 36 m/min - maximum profile length - 6.5 m - maximum coil weight - 500 kg - the line power consumption approx. 36-40 kW IMPORTANT: the line currently produces only non-perforated profiles. However, perforated module can be integrated into the line for extra cost

Condition: used, mileage: 64,281 km, power: 162 kW (220.26 HP), first registration: 06/1999, overall weight: 10,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, total length: 6,900 mm, total width: 2,300 mm, total height: 2,910 mm, Equipment: ABS, parking heater, A very well-maintained MAN L2000 as a city fire engine (LHF 16/12) from the Berlin Fire Department. Water tank: 1200 liters + foam tank: 100 liters, Rosenbauer 16/8 rear-mounted pump with quick attack connection on the right, hose reel at the rear, and partial equipment load. Tilting crew cab with auxiliary heater and mirror heating, differential lock on the rear axle. Regularly maintained without any outstanding repairs, recent inspection including lubrication and replacement of the air dryer cartridge. The engine runs smoothly and the gearbox shifts well; a very maneuverable vehicle with good tires. Info: We will repair the damaged ladder mount. +++ Ready for immediate use. Hfedpoz N Nlqofx An Non

Condition: used, mileage: 940,280 km, power: 324 kW (440.52 HP), first registration: 01/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, *Drive and Engine* Engine: DAF MX-11, 320 kW (435 hp), Euro 6 Transmission: AS Tronic, 12-speed, direct drive Rear axle: SR1344, gear ratio 2.64, mechanical differential lock Traction control system (TCS) *Suspension and Axles* Front axle: Single axle, parabolic suspension, load capacity 7.5 t Rear axle: Single axle, air suspension, load capacity 13 t ECAS air suspension at the rear *Cab and Comfort* Cab: Space Cab, metallic painted, central locking Seats: Driver's seat Luxury Air, passenger seat Basic (fixed) Sleeping comfort: Lower bunk with drawer, upper bunk as storage space, cold foam mattress Air conditioning: Air conditioning system, auxiliary heater (air), automatic temperature control Sunroof: Electrically operated Cooler box/refrigerator Radio/USB player, two speakers *Safety and Driver Assistance* Adaptive cruise control with FCW and AEBS Predictive Cruise Control Electronic Stability Control (VSC) Lane change warning system Standard immobilizer MX engine brake *Lighting and Visibility* Halogen headlights, LED daytime running lights, fog lights Front mirror, no exterior sun visor ----* Jost JSK42C fifth wheel coupling, mounting plate 26 mm ----* Hfjdpfx Aez N Rlfjn Njn HYVA hydraulic system ----* Tire dimension: 315/70R22.5 Fuel tank: 545 liters AdBlue tank: 90 liters Technical gross vehicle weight: 20500 kg Unladen weight: Overall length: Wheelbase: 3600 Inspection due: / ----Vehicle number: 12567----Errors and prior sale excepted----Advertising and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. We can offer the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection, complete export handling, arrangement of financing, application for export license plates, vehicle delivery, vehicle registration, recovery and vehicle transport.----YOUR VTS TEAM

Condition: used, mileage: 76,074 km, power: 162 kW (220.26 HP), first registration: 09/2000, overall weight: 10,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, total length: 6,900 mm, total width: 2,300 mm, total height: 2,910 mm, Equipment: ABS, parking heater, A very well-maintained MAN L2000 fire engine, designed for urban firefighting (LHF 16/12), belonging to the Berlin Fire Department. Water tank: 1200 liters + foam tank: 100 liters, rear-mounted Rosenbauer 16/8 pump with quick-attack nozzle on the right side, and partial equipment load. Hodpoz N Nl Refx An Nofn Crew cabin: tilting, with auxiliary heater and mirror heating, differential lock on the rear axle. Fully serviced and maintained with no backlog of repairs; thorough inspection carried out, including lubrication and replacement of the air dryer filter. The engine runs smoothly, and the gearbox shifts easily; a very maneuverable vehicle with good tires. Note: The damaged ladder mount will be repaired by us. +++ Immediately ready for use.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Hjdpfx Anszgq Sze Nefn

Condition: used, Year of construction: 2012, functionality: fully functional, PERONI RUGGERO AGD-EI Semi-automatic machine for threading and gluing flat elastic bands onto flat-laid diary/planner covers. Manufacturer: Peroni Ruggero, Via Corsica 31, Varese, Italy Machine type: AGD-EI Year of manufacture: 2012 Technical Specifications: • Cover format: min. 83 × 120 mm — max. 340 × 510 mm • Operating speed: up to 8 pieces/min (480 pieces/hour) Hfjdpfx Ajz A A D Sjn Non • Elastic band width: 5–15 mm • Cover material thickness: 1–2.5 mm (up to 3.5 mm for foam boxes) • Maximum spine thickness: 25 mm • Motor power: 4 kW • Air consumption: 150 Nl/min at 7 bar • Machine dimensions: L 1,450 × W 1,400 × H 2,100 mm • Glue heater dimensions: L 700 × W 450 × H 700 mm Price: €19,500.00

Condition: used, mileage: 86,041 km, power: 162 kW (220.26 HP), first registration: 05/2005, overall weight: 10,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, total length: 6,900 mm, total width: 2,300 mm, total height: 2,910 mm, Equipment: ABS, parking heater, A very well-maintained MAN L2000 city fire engine (LHF 16/12) from the Berlin Fire Department. Water tank: 1200 liters + foam tank: 100 liters, Rosenbauer 16/8 rear-mounted pump with quick-attack nozzle on the right, hose reel at the rear, and partial equipment load. Tilting crew cabin with auxiliary heater and heated mirrors, differential lock on the rear axle, and cruise control. Hfsdpfsz N Nl Dex An Nen Regularly maintained without any pending repairs, recently inspected with lubrication and new air dryer filter. The engine runs smoothly and the transmission shifts well; a very maneuverable vehicle with good tires. +++ Valve for new level adjustment with flange is missing in the filling tube – can be obtained or a price reduction will be applied +++. Otherwise, the vehicle is complete and ready for operation. + 160 +

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, KOPPENS BR 4500/600 | Continuous frying machine for thermal oil Manufacturer: Koppens Convenience Food Systems Model / Type: BR 4500/600 Serial number: 1219 Year of manufacture: 1998 Power supply: 400 V, 50 Hz, 3 phases, 27 A, 13 kW Working width of the belt: 550 mm Loading height: 925 mm Discharge height: 950 mm Machine weight: 1250 kg Oil heating system: Indirect - coil for thermal oil Maximum coil power: 180 kW Chamber capacity (frying oil): min. 845 liters (max. level above the belt: 80 mm) Frying time: Continuously adjustable in the range of 25 - 250 seconds Belt speed: Continuously adjustable in the range of 1.08 - 10.8 m/min The industrial continuous frying machine Koppens BR 4500/600 is a highly efficient and uncompromising solution designed for professional meat processing plants, poultry processing, fish processing, and convenience food manufacturers. The machine is designed for continuous, immersion frying of a wide range of products – from nuggets, burgers, and breaded cutlets to croquettes and fish fingers. Thanks to the use of a 550 mm wide belt, the device offers a huge throughput while maintaining perfectly consistent quality and color of the finished product, eliminating the problem of undercooked or burnt batches. The heating system based on indirect heat exchange through a coil powered by thermal oil (up to 180 kW) is the most desirable solution in the industry. Unlike electric heaters, thermal oil guarantees a very stable and uniform temperature along the entire length of the frying tank. This protects the edible oil from localized overheating and excessive degradation (oxidation). The mechanical system for lifting the top cover (hood) provides immediate and safe access to the working area, allowing the crew to quickly inspect and effectively perform foam cleaning. Hodozutgkspfx An Nsfn

Condition: used, functionality: fully functional, first registration: 03/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x2, color: red, gearing type: mechanical, Year of construction: 1997, Equipment: differential lock, From our immediately available stock of used vehicles, we offer you: Fire Engine LF 16/12 on MAN 14.222 with Differential Lock General Data: • Year of manufacture: 1997 • Mileage: approx. 31,000 km • Permissible total weight: 14,000 kg • RAL 3000 (fire red) Chassis: • MAN 14.222 4x2 with differential lock and 222 HP • Diesel engine with manual transmission and power steering • Tow bar Cab: • Crew cab (1:8) in RAL 3000 (fire red) • Holders for 2 breathing apparatus sets facing away from direction of travel • Auxiliary heater Body: • Manufacturer: Ziegler • LF 16/12 body in accordance with DIN • Two spacious side equipment compartments per side • Folding steps for side compartments • Mounts for standard equipment • Bracket for hose reel • Mountings for 2 additional breathing apparatuses • Storage for extension and hook ladders on the roof Vehicle pump / Extinguishing agent tank: • Ziegler FPN 16-8 centrifugal fire pump • Output: 1,600 l/min at 8 bar • Water tank: 1,700 l • Foam tank: 400 l Firefighting equipment: • Rigid quick-attack line (top of G6 compartment) • Roof monitor • Built-in foam proportioner Safety and Lighting: • 3 blue rotating beacons • Electronic siren system • Lighting for crew and equipment compartment Hfedpoxd Unbsfx An Non • Additional spotlights • Optional hygiene board and reversing camera All details are stated to the best of our knowledge and belief; no guarantee for completeness or accuracy. This advertisement is intended solely for informational purposes and does not constitute an offer. Subject to prior sale!

Condition: good (used), Year of construction: 2013, lifting height: 11,900 mm, fuel type: hybrid, Weights Empty weight: 4.600 kg Functional Lifting capacity: 350 kg Working height: 1.390 cm Dimensions of cargo space: 330 x 180 x 268 cm CE mark: yes Hfodpfey Synxjx An Njn Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Production country: IT Additional information Please contact Christian Theißen for more information Manufacturer: Imer Model: IT 12180 DE Year of build: 2013 Condition: Used Data: Max. working height: 13,90 m Movable up to working height: 13,90 m Max. platform height: 11,90 m Lifting capacity: 350 kg Drive type: Hybrid Platform dimensions LxW: 2,55 x 1,72 m Platform length pushed out: 3,95 m Transport dimensions LxWxH: 3,30 x 1,80 x 2,68 m Empty weight: 4.600 kg Special features: white tires, off-road tires foam-filled, hybrid drive, 4 supports, anchor points for restraint systems (PPE) available.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Hfjdpsz Aaggofx An Non Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: used, mileage: 1,117,307 km, power: 340 kW (462.27 HP), first registration: 05/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, 1. Vehicle Specification and Application* Type: FT, 4x2E, Semi-trailer tractor, XFH series * Application: Transport, On-road vehicle, Fully Built Up (FBU) production Hjdpezhrbajfx An Nsfn * Production start: 2015-05 2. Powertrain* Engine: MX-13, 340 kW (462 hp), Euro 6, Standard engine, Normal Duty * Transmission: AS Tronic, 12 gears, Direct drive, AS Tronic transmission control * Differential lock: Mechanical * Anti-Slip Regulation (ASR): present 3. Suspension and Axles* Front axle: Single axle, Parabolic suspension, Load capacity 8 t * Rear axle: Single axle SR1344, Air suspension, Load capacity 13 t * ECAS air suspension: present 5. Cab and Interior* Cab type: Super Space Cab, U249 * Seats: Driver's seat Luxury Air, Passenger seat Basic (fixed) * Sleeper berths: Upper and lower sleeper berth, Cold foam mattress, Safety net * Air conditioning, Auxiliary heater (air), Timer for auxiliary heater * Cool box/refrigerator, Electric windows, Pollen filter * Luxury speaker system (6 speakers), Truck phone 6. Safety and Driver Assistance* Electronic Stability Control (VSC), Lane Change Assist System * Adaptive cruise control with FCW and AEBS, Predictive Cruise Control * Digital tachograph, FMS diagnostics, Driver Performance Assistant * Basic immobilizer, No airbags 7. Braking System* Disc brakes on the drive rear axle, ZF-Intarder * Brake performance monitoring, Parking brake actuation with test position 8. Wheels and Tires* Aluminum wheels Alcoa, Rim size 22.5 inches * 9. Paintwork and Exterior * Chassis color: Anthracite gray * Cab color: Brilliant white * Sun visor, Halogen headlights, LED daytime running lights 10. Trailer Equipment* Jost JSK37CW fifth wheel coupling, Mounting plate, Electrical connection 24V/15-pin -----* Tire dimension front axle: 385/55R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 845 + 430 * AdBlue tank: 90 * Technically permissible total weight: 20500 kg * Unladen weight: 8382 kg * Overall length: 6160 mm * Wheelbase: 3800 * Next service due: / ----Vehicle number: 12127----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.

Condition: used, Year of construction: 2018, Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm Hfsdpfx Ajzy Ud Ion Nen - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, mileage: 86,041 km, power: 162 kW (220.26 HP), first registration: 09/2000, overall weight: 10,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, total length: 6,900 mm, total width: 2,300 mm, total height: 2,910 mm, Equipment: ABS, parking heater, A very well-maintained MAN L2000 serving as a city fire engine (LHF 16/12) from the Berlin Fire Department. Water tank: 1200 L, foam tank: 100 L, rear-mounted Rosenbauer 16/8 pump with quick attack line on the right, hose reel at the rear, and partial equipment load. Hfedpfxsz N Nlwo An Non Tilting crew cab with auxiliary heater and heated mirrors, differential lock on the rear axle. Regularly maintained without any accumulated repair work, recent thorough inspection with lubrication, and new air dryer cartridge. The engine runs smoothly, and the transmission shifts easily; a very maneuverable vehicle with good tires. +++ Immediately ready for operation.

Condition: used, functionality: fully functional, power: 176.52 kW (240.00 HP), fuel type: diesel, Year of construction: 1996, FIRE ENGINE (CREW VEHICLE) MLF MAN 10.224: Year of manufacture: 1996 Crew: 9 Water tank: 1,200 litres Foam tank: 120 litres Pump: 1,600L/min at 8 Bar Turbo foam proportioner ZR 400 Extinguishing water tank with 1,200 litres and 120 litres of foam Hfjdpfow U Dffsx An Njn Rapid intervention hose reel Three equipment compartments on each side of the vehicle. All information provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement is for informational purposes only and does not constitute an offer. Subject to prior sale!

Condition: used, Year of construction: 2017, Offered for sale is an industrial 3D camera with light field technology. Equipped with a RICOH lens and custom-fit transport case with foam insert. The camera is offered in fully functional condition. Inspection possible by prior arrangement. Hfsdez I Tpcepfx An Njn