Used Foam for sale (428)

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2473628, power: 35.3 kW (47.99 HP), load capacity: 227 kg, mast type: telescopic, lifting height: 14,100 mm, platform length: 1,830 mm, platform width: 760 mm, overall weight: 6,500 kg, transport length: 6,500 mm, transport width: 2,290 mm, transport height: 2,070 mm, fuel type: diesel, tire size: 12 x 16,5, color: red, Equipment: UVV, all wheel drive, differential lock, Technical specifications: Year of manufacture: 2020 Working height: 16.10 m Platform height: 14.10 m Platform dimensions (LxW): 1.83 x 0.76 m Dedpeyqy Etefx Apwewa Basket length: 1.52 m Basket rotation: 170° Slew range: 360° Lateral outreach: 7.54 m Load capacity: 227 kg Total weight: 6500 kg Gradeability: 45% Drive: Diesel 35.8 kW/48 hp Platform rotation: 170° Foam-filled all-terrain tyres All-wheel drive, differential lock, overload sensors, fully functional, normal signs of use

Condition: good (used), Year of construction: 2021, functionality: fully functional, overall weight: 40 kg, type of cooling: water, temperature: 70 °C, total height: 1,500 mm, total length: 400 mm, total width: 400 mm, ambient temperature (max.): 200 °C, pressure: 10 bar, pump pressure: 25 bar, energy efficiency: B, Equipment: 3rd hydraulic function, low noise, I am offering for sale a stainless steel water heater from VIESSMANN with a capacity of 160 liters, equipped with one stainless steel coil for connecting to a boiler. The tank is used, in very good condition, and fully functional. It is made of the highest quality stainless steel with a grade of 1.4571. For each tank, we provide proof of purchase in the form of a receipt or invoice, so you are buying from a legitimate company and have a two-year warranty on leak-proofness. There are no better tanks on the market; they are much better than new, enameled Polish tanks, or Polish tanks that claim to be stainless steel but contain thin, razor-like Chinese stainless steel inside. We sell tanks made of acid-resistant stainless steel with high strength. There is no need to use a safety valve or any magnesium anode!!! Each tank has a large inspection opening, allowing you to see inside and check that it is clean. Highest quality stainless steel. 1.4571. Why buy Polish enameled tanks or stainless steel of questionable quality with poor pressure resistance every few years? Incomparably better than new Polish enameled tanks. As shown in the pictures, it is complete, including insulation made of rigid foam that retains heat for 3 days. Dimensions: height 125cm, diameter 60cm. In perfect condition! We have a large selection of stainless steel water heaters with a capacity of 100, 130, 160, 200, 350, and 500 liters, with a coil and a double jacket, in our permanent offer. When you buy from us, you are buying from a legitimate company. We provide an invoice and a written warranty on leak-proofness for all purchased tanks. Dodoztc S Tjpfx Apwswa

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2473768, power: 55 kW (74.78 HP), load capacity: 227 kg, mast type: telescopic, lifting height: 25,910 mm, overall weight: 16,965 kg, transport length: 10,030 mm, transport width: 2,490 mm, transport height: 2,670 mm, fuel type: diesel, tire size: 18-625, color: red, Equipment: UVV, all wheel drive, differential lock, Technical data: Year of manufacture: 2020 Engine: Diesel 55 kW Working height: 27.91 m Platform height: 25.91 m Platform dimensions (LxW): 1.83 x 0.91 m Overall dimensions (L x W x H): 11.63 m x 2.49 m x 2.67 m Basket arm length: 1.68 m Load capacity: 227 kg Total weight: 16,965 kg Djdpfx Ajyqy Iuspwswa Drive: Diesel 55 kW Climbing ability: 45% Platform rotation: 170° Travel speed: 4.8 km/h Slew range: 360° Platform rotation: 170° Turning radius (inside): 3.05 m Turning radius (outside): 6.22 m Foam-filled off-road tires All-wheel drive, differential lock, overload sensors, UVV, fully functional, general signs of use

Year of construction: 1970, condition: ready for operation (used), machine/vehicle number: 55703, SANDT 410 Hydraulic Swing-Arm Cutting Press – 18 tonnes Price: €3,650 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands Very clean and robust German hydraulic swing-arm cutting press manufactured by J. Sandt AG, Pirmasens. Suitable for die-cutting materials such as leather, rubber, plastics, foam, felt, textiles, gasket material, cork and cardboard. Technical specifications * Manufacturer: J. Sandt AG * Model: 410 * Serial number: 55703 * Year of manufacture: unknown, presumably late 1960s * Cutting force: 18 tonnes * Working table: 900 × 450 mm * Swing-arm pressure plate: 550 × 350 mm * Measured clearance: approximately 110 mm * Mechanical height adjustment by handwheel * Electrical supply: 380 V, 3-phase, 50 Hz Dsdezqhdijpfx Apwswa The machine is in clean, used condition and has been repainted. The lower cutting plate and the aluminium upper plate show signs of use. Machining and surface-grinding of both the lower and upper plates can be carried out upon request for an additional €250. The machine can be inspected and tested by appointment. Loading onto the buyer’s transport can be arranged. All information is provided to the best of our knowledge and is subject to verification.

Condition: used, Year of construction: 2021, Overview This compact canning line combines a Wild Goose Quick Change Gosling semi-automatic can filler, a Zomerdijk TWIST can rinser and a Crafted Goose EME automatic labeller (type JE-1100/185-S2) with a Cyklop CM220 thermal inkjet printer. Built in 2021 (filler and labeller), the line runs at up to 600 cans/hour and is compatible with 0.33 L, 0.44 L and 0.5 L can formats (currently tooled for 0.44 L cans). The filler is mounted on a wheeled base frame and includes DO buster and CO₂ regulation equipment as well as low- and high-flow foam control for beers above 4.2 g CO₂/L. The filler's production counter reads approx. 35,000 fill cycles - light craft-scale use. The line is still installed and under power, and can be viewed on request. Technical data - Line type: Small canning line (filler + rinser + labeller) - Capacity: 600 cans/hour - Can formats: 0.33 L / 0.44 L / 0.5 L (currently tooled for 0.44 L) - Filler type: Semi-automatic - Filler electrical supply: 230 V single-phase, 50/60 Hz, 8 A - Foam control: low- and high-flow, for beer >4.2 g CO₂/L - Labeller: EME type JE-1100/185-S2, automatic, with Cyklop CM220 thermal inkjet printer - Recorded use: approx. 35,000 fill cycles (production counter) - Year of manufacture: 2021 (filler and labeller) Scope of Delivery - Can Filler | Wild Goose | Quick Change Gosling | Semi-automatic; wheeled base frame; DO buster and CO₂ regulation; low- and high-flow foam control; tools and basic spare parts kit; format kits for 0.33/0.44/0.50 L cans | 2021 - Can Rinser | Zomerdijk Engineering | TWIST | Infeed buffer on stand, 2 rinse cages, post-rinse collection table; for 0.33/0.44/0.50 L cans - Labeller + Printer | EME (Crafted Goose) | JE-1100/185-S2 | Automatic label application; Cyklop CM220 thermal inkjet coder | 2021 Condition Djdpfx Aezk U Eyopwswa Used - light craft-scale use; still installed and under power at the seller's site. The line can be visited and demonstrated on request. Availability Available now. Location: Spain.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,351 kg, axle configuration: 3 axles, first registration: 02/2023, total length: 13,550 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation Insulated double rear doors (FP, NX17) foam with double s/steel lockrods Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Dodpfozbg H Eex Apwowa Tyres 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4009mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). 1 insulated ventilation flap in the left hand rear door at the top Tyres Information Front left - 7 mm Front right - 6 mm Middle left - 8 mm Middle right - 8 mm Rear left - 7 mm Rear right - 7 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,275 kg, axle configuration: 3 axles, first registration: 01/2023, total length: 13,550 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. CARRIER VECTOR 1550, with E-Motor and battery. Dsdpfjzaqw Eox Apwewa Insulated double rear doors (FP, NX17) foam with double s/steel lockrods. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550 mm. Overall trailer width - 2600 mm. Total height (unladen) - 4009 mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). 1 insulated ventilation flap in the left hand rear door at the top Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm

Condition: new, Year of construction: 2026, Exceptional special price, as it was used at our in-house trade fair. Operating hours: 2 Immediately available – subject to prior sale. First come, first served. Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated jaws Pre-compactor with end-position dampened cylinder and bolted cover Switchgear with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor Dedpfx Apjlht H Eswjwa Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. Dodpfx Aeu I R Utspwowa This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Dsdpfjtnz Ttsx Apwswa Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations with required throughput capacities of up to 150 kg/h. The robust press housing enables the production of high-strength briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options are possible, e.g., oil cooling for use in continuous operation. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. User-friendly operation thanks to Siemens PLC control To fulfill our promise of performance, we design and manufacture all control cabinets ourselves at our Ilsfeld location and equip them with well-known international components. This guarantees the highest quality in a compact design. The Siemens PLC control used is perfectly tailored to the requirements of the briquetting process. Dwodpfxoil Hgge Apwea Foreign object-resistant conveying screw thanks to cardan suspension The conveying screw, which transports the material into the pre-compactor of the briquetting press, is suspended on a cardan joint. This prevents foreign objects from causing damage to the conveying screw. As is often the case, however, the specific application determines which suspension is chosen. For metal applications, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (liters): 250 Weight (approx. kg): 1100 Location: In stock at 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2026, Your advantages Stable pressing mechanism with a wear-resistant, chrome-plated die Press chamber wear bushing Pre-compressor with end-position damping cylinder and screwed-on cover Control panel with PLC control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on a stable base frame with rubber feet Briquette length monitoring Robust design, low-maintenance technology, small footprint: The machines in the C-series are particularly suitable for small and medium-sized businesses whose required throughput of 50-80 kg/h or 200 to 400 kg/day is not exceeded. Virtually any suitable material can be briquetted, such as wood, styrofoam, foam, paper, or biomass. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm) 50 Throughput up to (kg/h) 50 (material-dependent) Hydraulic motor (kW) 5.5 Screw motor (kW) 0.55 Oil volume (liters) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for long operating times Briquette length monitoring: Regulates the length of the briquette to a uniform size Press chamber wear bushing: Dwjdpfx Apjcnz U Ejwja Prevents wear in the press area Location: Ex works - free loading

Condition: new, Year of construction: 2026, Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Dwedsbtnf Espfx Apwoa Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated clamp Pre-compactor with end-position dampened cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Dwsdpstnz Hbofx Apwsa mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for economical volume reduction of recyclable residues in industrial and craft sectors: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials Horizontal baler, DIXI 60 SLD waste press with tipping device Technical specifications: Pressing force: 60 tons Specific pressure: 6.81 kg/cm² Power supply: 400V / 7.5kW Bale dimensions: 800 x 1100 x 1200 mm Number of ties: 3 Bale weight: approx. 370–410 kg Tying: manual Feed opening: 990 x 1110 mm Machine weight: 5,420 kg Average pressing cycle: 47 sec Year of manufacture: 2011–2016 Dixi 80SLD Baler Technical Data of the Baler Dwodpfx Apera A E Uowsa Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Feed opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 sec Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: Length: 4,200 mm (+cage 1,600 mm) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016–2020 Weight: approx. 8.4 tons Condition: Used

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 680 kg, empty load weight: 3,500 kg, construction height: 2,600 mm, fuel type: diesel, total length: 3,790 mm, drive type: Diesel, construction width: 2,130 mm, working height: 10,000 mm, Scissor lift Condition: New machine Technical condition: New Front tire size: 26x12.00 Rear tire size: 26x12.00 Description: foam-filled tires Djdpfjzrcpcox Apwowa Joystick control, all-wheel drive, fully automatic leveling

Condition: used, functionality: fully functional, Year of construction: 2020, power: 36 kW (48.95 HP), load capacity: 454 kg, empty load weight: 11,430 kg, construction height: 2,820 mm, fuel type: diesel, total length: 9,700 mm, drive type: Diesel, arm reach: 16,510 mm, construction width: 2,490 mm, working height: 21,810 mm, Telescopic Work Platform Technical condition: New Front tyre type: Pneumatic Front tyre size: 355/55D 625 foam-filled Rear tyre type: Pneumatic Rear tyre size: 355/55D 625 foam-filled Dsdpfx Aozrcn Eepwjwa

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 70 h, load capacity: 680 kg, empty load weight: 3,550 kg, construction height: 2,600 mm, fuel type: diesel, total length: 3,790 mm, drive type: Diesel, construction width: 2,130 mm, working height: 10,000 mm, Scissor lift platform Condition: New machine Technical condition: Good Front tyre size: 26x12.00 Dwsdpfxjzrcips Apwsa Rear tyre size: 26x12.00 Description: Foam-filled tyres Joystick control, all-wheel drive, fully automatic self-levelling

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,495 h, load capacity: 1,410 kg, empty load weight: 7,839 kg, construction height: 3,150 mm, fuel type: diesel, total length: 4,880 mm, drive type: Diesel, construction width: 2,290 mm, working height: 17,950 mm, Scissor lift platform Condition: Ready for use and fully functional Technical condition: normal Front tyre size: 30 x 84 cm / 12 x 33 Dwodpfxozrcgbs Apwja Rear tyre size: 30 x 84 cm / 12 x 33 Battery voltage: 12V Battery year: 2019 Description: FOAM-FILLED TYRES / ALL-WHEEL DRIVE WITH OUTRIGGERS, SAMPLE PHOTOS, PAINT SLIGHTLY SCUFFED, SIGNS OF USE Drivable up to 9.14 m -- Deutz diesel 49 HP (36 kW) -- All-wheel drive

Condition: used, maximum load weight: 26,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2026, next inspection (TÜV): 07/2027, loading space length: 13,310 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Equipment: Collision protection, double rear doors, lift axle, air suspension with lifting/lowering device, support legs, tread depth: 100% Safety & Environment: ABS, disc brakes, EBS ----KRONE Cool Liner Duoplex Steel * Carrier Vector 1350 - Diesel * Temperature recorder * Double-decker with beam SAF Intradisc Plus axles with air suspension and disc brakes 240L plastic diesel tank 7- and 15-pin electrical connections 36" pallet box Toolbox Warning sign Water tank 2 spare wheel holders DUOPLEX STEEL: Thermal bridge-free panel construction, panels with steel cover on both sides 100% CFC-free foam Aluminum angle skirting board, approx. 300mm high ----* Our opening hours * Mondays - Fridays: 8:00 AM - 5:00 PM - Saturdays: by appointment! Dwsdpfszp S Naex Apwja * Outside of opening hours, we are available by appointment! * We speak: English, ????? ?? ????? ????? * Other information: Errors, prior sale, and changes reserved. * Leasing, financing, and trade-in possible. * All information is provided without guarantee. ----

Condition: used, maximum load weight: 26,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2026, next inspection (TÜV): 07/2027, loading space length: 13,310 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Equipment: Collision protection, double rear doors, lift axle, air suspension with lifting/lowering device, support legs, tread depth: 100% Dsdszp S I Nopfx Apwswa Safety & Environment: ABS, disc brakes, EBS ----KRONE Cool Liner Duoplex Steel * Carrier Vector 1350 - Diesel * Temperature recorder * Double-decker with beam SAF Intradisc Plus axles with air suspension and disc brakes 240L plastic diesel tank 7- and 15-pin electrical connections 36" pallet box Toolbox Warning sign Water tank 2 spare wheel holders DUOPLEX STEEL: Thermal bridge-free panel construction, panels with steel cover on both sides 100% CFC-free foam Aluminum angle skirting board, approx. 300mm high ----* Our opening hours * Mondays - Fridays: 8:00 AM - 5:00 PM - Saturdays: by appointment! * Outside of opening hours, we are available by appointment! * We speak: English, ????? ?? ????? ????? * Other information: Errors, prior sale, and changes reserved. * Leasing, financing, and trade-in possible. * All information is provided without guarantee. ----

Condition: used, Year of construction: 2007, operating hours: 3,826 h, Equipment: all wheel drive, Internal vehicle number: MK300047 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Used JLG 460SJ telescopic boom lift, manufactured in 2007. The machine offers a working height of 16.09 m, a horizontal outreach of up to 12.72 m and a platform capacity of 270 kg. Its four-wheel hydrostatic drive, oscillating axle, 45% gradeability and foam-filled tyres make it suitable for demanding off-road applications. Technical details: * Make/model: JLG 460SJ * Machine type: Telescopic boom lift * Year of manufacture: 2007 * Operating hours: 3,826 h * Machine weight: 7,741 kg * Working height: 16.09 m * Horizontal outreach: Up to 12.72 m * Platform capacity: 270 kg * Platform dimensions: Approx. 0.91 × 1.83 m * Platform rotation: Hydraulic, up to 180° * Turntable rotation: 360°, non-continuous * Jib movement range: 130° (+70°/?60°) * Drive system: Four-wheel hydrostatic drive * Engine power: 36.4 kW * Fuel tank capacity: 83 litres * Hydraulic tank capacity: 136 litres * Emergency pump motor: 12 V DC * Travel speed: Up to 7.2 km/h Dwodpfx Apozqicmswoa * Gradeability: 45% * Axle oscillation: 0.20 m * Maximum ground pressure: 4.85 kg/cm² * Vehicle number: MK300047 * Condition: Used * German vehicle Dimensions: * Overall width: 2.31 m * Transport height: 2.47 m * Transport length: 8.91 m * Wheelbase: 2.37 m * Ground clearance: 0.30 m * Turret overhang in working position: 0.86 m * Inside turning radius: 2.00 m * Outside turning radius: 4.84 m Equipment: * Hydraulic platform rotation * Proportional control * Improved multi-function control * Interactive ground control display * ADE® control system * Platform display for machine status * AC cable to platform * 5-degree tilt alarm with warning light * Pivoting engine console * 12 V DC auxiliary power supply * Hour meter * Four-wheel drive * Oscillating axle * Movement alarm * Horn * Glow plugs * Lifting and securing eyes * Tyres: 12 × 16.5, foam-filled Inspection possible by prior arrangement. Further information, photos and videos are available upon request. Subject to errors, changes and prior sale.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 100 mm, spindle speed (max.): 50,000 rpm, spindle motor power: 3,600 W, number of axes: 3, This 3-axis DELTA LGT2113 PRO gantry milling machine was manufactured in 2016. It features a working area of 2100 mm in the X-axis and 1300 mm in the Y-axis, equipped with a powerful 3.6 kW spindle capable of reaching 50,000 rpm. The machine includes a 12-position automatic tool changer and a 4-zone vacuum table, making it suitable for various milling and specialized cutting applications. If you are looking to get high-quality milling capabilities, consider the DELTA LGT2113 PRO machine we have for sale. Contact us for further details. • Tool taper: HSK 25 • Number of tool slots: 12-position automatic tool changer. • Main electronic connection: 380 V, 50/60 Hz • Pump drive power: 5.5 kW each • Gantry-type CNC milling machine • Italian-made machine • 4-zone vacuum table Dwjdpfxjzk Ipxj Apwja • Designed for specialized industrial applications, especially for the production of tooling used in the printing industry • Also suited for a wide range of general milling operations • X and Y axes: Rack and pinion drive • Z axis: Ball screw drive • Automatic centralized lubrication system • Liquid-cooled spindle • The spindle was completely overhauled a few months ago, including bearing replacement, and is currently in excellent working condition • Integrated Blum tool measurement system with optical transmitter/receiver (probe not included) • 2 vacuum pumps • Capacity: 250 m³/h each • Power supply for vacuum system: 230/400 V, 50 Hz • Windows 10 operating system • Proprietary 2.5D control software • Deltacam CAM software • 17” TFT display • Dust extraction system (vacuum cleaner not included) • Oscillating knife head for precise cutting of rubber, foam and similar materials, allowing the machine to perform both milling and specialized cutting applications • Minimum Quantity Lubrication (MQL) system for improved machining performance and extended tool life • The machine is currently under power and can be inspected in operation • It is no longer fully utilized, which is the reason for its sale • The machine is in good technical condition and the recently refurbished spindle is operating flawlessly

Condition: used, Year of construction: 2013, Overview This KOSME Barifill RFC 50-60-10 VKP rinser - filler - capper block, built in 2013, is designed for the rinsing and filling of glass bottles in beverage production lines. The block combines a 50-station single-channel rinser, a 60-valve glass bottle filler with short-tube VKP filling system and a Zalkin CA9 360 NG rotary capping section in one compact stainless steel machine. With approx. 16,000 bottles/hour on 0.75 L and approx. 20,000 bottles/hour on 0.33 L, the block sits in an attractive mid-range capacity class for water, beer, cider, wine and other glass-bottle applications. Integrated foam cleaning supports hygienic operation; the machine is operated via a touchscreen HMI on an articulated suspension arm and is enclosed in transparent protective safety guarding with safety interlocks. The machine is still installed and under power and underwent extensive maintenance in Q4/2025. Please note: the Zalkin capping heads are not included in the sale price - the capper base machine is included; the 10 capping heads are optionally available. Technical data - Manufacturer: KOSME S.r.l. - Model: Barifill RFC 50-60-10 VKP - Year of manufacture: 2013 - Machine type: rinser - filler - capper block for glass bottles - Filling system: short-tube VKP, 60 filling valves, 113 mm pitch Dwedpfxezi I T Io Apwsa - Rinser: 50 stations, single-channel, 113 mm pitch - Capper: Zalkin CA9 360 NG (2013), 10 capping positions, approx. 22,000 bottles/hour (capping heads not included in the sale price, optionally available) - Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L - Foam cleaning: integrated - Control: touchscreen HMI on articulated suspension arm - Electrical supply: 400 V, 50 Hz, 17 kW installed power, 38 A - Compressed air: 6 bar, approx. 450 Nl/min - Water: 4 bar, approx. 3.5 m³/h - Machine weight: approx. 10,500 kg Equipment - KOSME Barifill RFC 50-60-10 VKP main machine - 50-station single-channel rinser - 60-valve glass bottle filler, short-tube VKP filling system - Integrated foam cleaning - Zalkin CA9 360 NG capper base machine - Touchscreen HMI on articulated suspension arm - Stainless steel machine frame with transparent protective guarding and safety interlocks - Process piping, vacuum / air equipment, stainless steel bottle handling - Layout drawing available - Optionally available (not included in the sale price): Zalkin capping heads Condition Used - installed in an industrial production environment and still under power. The machine underwent extensive maintenance in Q4/2025 and can be visited and inspected in operation on request. Availability From November 2026 (week 45). Location: Germany.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,917 kg, axle configuration: 3 axles, first registration: 07/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. Insulated double rear doors (FP, NX17) foam with double s/steel lockrods. Plastic toolbox with cover holder, sleeves and drawer behind the unit. Black plastic fuel tank SCHMITZ 245l, 1 filling neck ; BIO-Diesel proofing. Tyres - 385/65R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Dwedpfxezmf S Ne Apwja Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes) . Tyres Information Front left - 9 mm Front right - 8 mm Middle left - 9 mm Middle right - 9 mm Rear left - 5 mm Rear right - 5 mm