Used Foam for sale (420)

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control Fedpfx Alez Dhrqs Uogh * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, number of ink cartridges: 26, color channels: CMYK + White + Varnish, number of print heads: 6, resolution (max.): 1,200 dpi, paper width (max.): 3,200 mm, paper height (max.): 50 mm, total width: 3,200 mm, counter reading (color): 1,328, year of last overhaul: 2025, type of input current: AC, input current: 15 A, input voltage: 240 V, We offer this used Liyu DSJ3204 UV HYBRID Digital Print Machine, year of construction 2022. Model number: DSJ3204 Year of manufacture: 2022 Serial number: M33DB0012C0E0 Net weight: 2400 kg Voltage: 200-240 V Current: 15 A Power consumption: 3300 W Frequency: 50 Hz Country of origin: China €63,900 including dismantling at our location and setup at the buyer's site by manufacturer Liyu Price is subject to negotiation (Transport to the customer and unloading at the customer's site are to be organized and are the responsibility of the customer/buyer.) Liyu Platinum EQ3 LED Hybrid Flatbed and Roll-to-Roll UV Printer Condition: Lightly used and in excellent condition Flatbed and roll-to-roll printing INCLUDES 3 mm aluminum composite panels 3050 mm x 1500 mm approx. 24 pieces INCLUDES 3 mm foam board 3050 mm x 2030 mm approx. 160 pieces Includes 26 unopened 1-liter bottles of UV ink Fjdpfx Aloy Nl E Ro Usgh Printed output approx. 1328 m² as of May 6, 2026 The Platinum EQ3 hybrid printing press is a state-of-the-art machine that meets the demands of modern printing. This machine boasts a wide range of features that enable users to complete their tasks more efficiently. The convenient dual-sided material feed accelerates the workflow and saves time and effort. Furthermore, the 4-zone vacuum system ensures that the material is securely held in place – resulting in higher print quality and a reduced risk of material shifting. Collision and safety sensors play a crucial role in workplace safety. They detect potential collisions and protect both the operator and the machine. The Platinum EQ3 Hybrid can print on materials up to 50 mm thick, opening up a broad range of application possibilities. This flexibility allows for the processing of a variety of materials for diverse projects. The automatic material height measurement system facilitates the precise adjustment of material parameters for accurate printing results. This feature not only improves print quality but also reduces material waste. Number of printheads: 6 RICOH GEN6, 6pl Printheads can be upgraded by speed up to 16 printheads. Inks: Currently CMYK, White, Vanish Print resolution: 1200 dpi Print speed (maximum): 180 m²/h Flow height: 50 mm Color gamut: CMYK + White + Light + Luminaire + Varnish Ink types: UV LED Drying system: UV LED Accessories: Includes inks (Cyan x 1, Magenta x 3, Yellow x 1, Black x 3, White x 2, Varnish x 3, Cleaning Solution x 3, each in 1-liter containers) and cleaning wipes. Further pictures and videos available upon request. For greater distances, a viewing can also be conducted via live video.

Condition: used, mileage: 156,461 km, power: 159 kW (216.18 HP), first registration: 10/1987, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1987, total length: 7,100 mm, total width: 2,500 mm, total height: 3,150 mm, Equipment: ABS, all wheel drive, Very well-maintained water tender LF 20 Superstructure by Rosenbauer with rear-mounted Rosenbauer R280N pump with high-pressure unit, 2800 l/min at 10 bar, 250 l/min at 40 bar. The pump was completely overhauled in 2015 (seals, impellers, guide vanes, bearings, etc.) According to the previous owner, the fire department, the pressure and pumping performance is like new. +++ Water tank 1800 l + 200 l foam tank +++ Special signals with Martin horn, fully functional, good tires 10 R x 22.5, DOT 4412 Chassis MB 1222 with 4x4 all-wheel drive and 2x differential lock, center and rear Rockinger trailer hitch, 13 t towing capacity, braked Includes hose reel at the rear (not shown) Fully operational, units and axles are dry Superstructure dimensions: 380 x 2450 x 1700 mm (L x W x H) Superstructure with 2 roof storage compartments and rear ladder New main inspection (TÜV) valid at the time of delivery Fjdez Amnkspfx Al Ujgh +++ Errors, changes and prior sale are subject to change +++

Condition: excellent (used), Year of construction: 2014, Type: CNC horizontal contour cutting machine Manufacturer: Fecken Kirfel Designation C56 Year of construction: 2014 Dimensions: Cutting width 1300 mm Cutting length 1300 mm Cutting height 1300 mm Blade rotation of +/- 360 degrees Max. Cutting speed 25 m/min Info: Very well-maintained CNC contour cutting machine with revolving bandknife and automatic grinding device. High precision in the smallest of spaces. Very small footprint The machine is network-compatible and can be integrated into the Windows network. The machine is still in daily use and can be inspected by appointment. Further information on request Available immediately Disassembly and transportation must be done by the buyer. Fgodjr Ilb Sepfx Al Ujh Please also note our other sales ads

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 10187, operating pressure: 180 bar, input voltage: 400 V, overall weight: 53 kg, The Kärcher HD 8/18-4 MXA eB Foam Plus Go!Further cold water high-pressure cleaner is a promotional model equipped with numerous special features. This unit is a showroom piece in like-new condition. The device is suitable for daily use in workshops or on the go. The scope of delivery includes the following: - ANTI!Twist - Pressure shut-off - Dirt blaster - eco!Booster - Spray lance, 840 mm Fgjdpfoyyv Uksx Al Ueh - Trigger gun, EASY!Force - High-pressure hose length: 15 m - High-pressure hose type: Flex - Integrated hose reel - Power nozzle - Foam lance - Quick coupling - Servo Control Technical data: - Power supply: 400V / 4.6 kW - Working pressure: 180 bar - Flow rate: 380–760 liters/hour - Power cord: 5 m

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer. Fgodpfxjz E S Hhe Al Ush

Year of construction: 2026, condition: new, Equipment: CE marking, Our company has been building foam cutting machines for over 15 years. The experience gained over the years of working on foam processing machines has allowed us to build the 4th generation of vertical machines RV 2500/2100 as well as the 3rd generation of horizontal contour lines SK3500. Our machines work on the Polish and European markets. The machines are designed and built in our company, the software is also our own. The materials used to build the machine are widely available on Polish and European markets. Fgsdpsiqt N Ijfx Al Ujh Our service works 7 days a week, providing a sense of security to our customers. Vertical machine left table 2100mm x 2600mm right table 2100mm x2600mm cutting height 1340mm Horizontal liner SK3500 rotary table 2200mm x2200mm cutting height 1250mm

Condition: used, Year of construction: 2023, Overview Compact tabletop canning system built by the US manufacturer Wild Goose Filling in 2023. The Gosling fills and seams beer and other beverages in 330 ml and 440 ml cans with 202 CDL ends at up to 720 cans per hour (330 ml). The CE version for 230 V single-phase supply comes with pre- and post-rinse and the DO hood with CO2 regulation for low oxygen pickup. The machine is still installed and can be seen in production on request. Technical data - Manufacturer: Wild Goose - Model: Gosling - Year of manufacture: 2023 - Output: up to 720 cans/hour (330 ml), 12 cans/minute - Filling heads: 1 - Can formats: 330 ml and 440 ml, body diameter 211 - Can ends: 202 CDL - Electrical supply: 230 V single-phase, 50 Hz - Compressed air: 185 L/min at 6.5-7.0 bar, clean and dry - CO2: 0.8-1.7 bar Fgjdpfxjz Iy Ape Al Ueh - Dimensions: 112 cm L x 66 cm W x 104-109 cm H - Weight: 125 kg - Configuration: tabletop system with adjustable leveling feet, enclosed stainless-steel structure - CE-marked Equipment - Pre- and post-rinse assemblies - DO hood with CO2 regulation (DO Buster CO2 tunnel) - Quick-change system for can bodies of different heights - Automated CO2 purging and foam control - Seaming station for aluminum and steel cans, lid chute for hands-free lid placement - Full-color touchscreen with recipe pre-sets, alerts and auto-testing functions - CIP/SIP automation - Seam check tools (metric) Condition Used, in working order and still installed. The machine can be visited in production on request. Dismantling, handling and truck loading are included. Availability Available immediately. Location: France.

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 5,800 h, fuel type: diesel, Equipment: all wheel drive, Diesel All-Wheel Drive Articulating Boom Lift GENIE Z 45/25 Year of manufacture: 2008 According to meter reading: 5,800 hours 🏗️ Performance Data & Working Range • Maximum working height: 15.70 m to 15.97 m (Model J with basket boom reaches up to 16.05 m) • Maximum platform height: 13.90 m to 14.05 m • Maximum lateral reach: 7.50 m to 7.52 m (Model J with basket boom up to 7.65 m) • Maximum lifting capacity: 227 kg (approved for 2 people + tools) • Turret swivel range: 359° (not continuous) • Platform rotation: 180° hydraulic (160° on models with basket boom) 📐 Dimensions & Weight • Transport length: approx. 5.56 m (Model J with folded basket boom approx. 6.65 m to 6.83 m) • Transport width: 2.29 m (with standard off-road tires) • Transport height: 2.11 m to 2.13 m • Wheelbase: 2.03 m • Ground clearance: approx. 18 cm to 24 cm • Operating weight (4x4 RT): approx. 6,078 kg to 6,460 kg (depending on tire filling, e.g. foam-filled) ⚙️ Drive & Off-Road Capability (4x4) • Drive type: All-wheel drive (4x4 / RT = Rough Terrain) with diesel engine (usually Deutz or Perkins) • Maximum gradeability: 45% (in retracted position) • Travel speed (retracted): up to 7.7 km/h • Travel speed (elevated): approx. 1.0 km/h • Tires: 14-17.5 / Off-road profile (often foam-filled to prevent punctures) • Fuel tank capacity: approx. 54 to 64.4 liters • Hydraulic tank capacity: approx. 83 to 95 liters - Immediately ready for operation in original condition! - Upon request, a new Austrian inspection certificate can be provided before delivery! Selling price: €13,900 net Fgsdpfsz Iv Hwex Al Ueh Affordable delivery also possible!

Condition: new, Year of construction: 2025, machine/vehicle number: sn. 816, functionality: fully functional, total height: 3,500 mm, total length: 3,600 mm, total width: 4,000 mm, cutting height (max.): 1,300 mm, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, space requirement height: 3,600 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, warranty duration: 12 months, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Fgjdpfswq Dvdox Al Ujh Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Condition: used, mileage: 86,041 km, power: 162 kW (220.26 HP), first registration: 05/2005, overall weight: 10,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, total length: 6,900 mm, total width: 2,300 mm, total height: 2,910 mm, Equipment: ABS, parking heater, A very well-maintained MAN L2000 city fire engine (LHF 16/12) from the Berlin Fire Department. Water tank: 1200 liters + foam tank: 100 liters, Rosenbauer 16/8 rear-mounted pump with quick-attack nozzle on the right, hose reel at the rear, and partial equipment load. Tilting crew cabin with auxiliary heater and heated mirrors, differential lock on the rear axle, and cruise control. Regularly maintained without any pending repairs, recently inspected with lubrication and new air dryer filter. The engine runs smoothly and the transmission shifts well; a very maneuverable vehicle with good tires. +++ Valve for new level adjustment with flange is missing in the filling tube – can be obtained or a price reduction will be applied +++. Fgsdpfez N Nl Dsx Al Ueh Otherwise, the vehicle is complete and ready for operation. + 160 +

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,592 h, power: 58 kW (78.86 HP), lifting height: 40,150 mm, fuel type: diesel, Equipment: all wheel drive, GENIE S-125 telescopic boom lift with a working height of 40.15 meters! Year of manufacture: 2011 According to the meter reading: 5,592 hours 🏗️ Performance data & working range • Max. working height: 40.15 m • Max. platform height: 38.15 m • Max. lateral reach: 24.38 m • Max. reach below ground level: 3.27 m • Platform load capacity: 227 kg (unrestricted) • Turret rotation: 360° continuous • Length of the boom (Jib): approx. 1.52 m 📐 Dimensions & weight • Operating weight: approx. 20,248 kg • Transport length: approx. 12.19 m (with retracted boom for transport) • Transport width (axles retracted): approx. 2.49 m • Working width (axles extended): approx. 3.35 m • Transport height: approx. 3.07 m • Platform size: 2.44 m x 0.91 m ⚙️ Drive & chassis • Engine options (diesel): Deutz TD 2011 L04i (74 hp / 55 kW) or Perkins 804D-33T (83 hp / 62 kW) • Fuel tank capacity: 151 liters • Hydraulic oil tank capacity: 208 liters • Drive / steering: 4WD (all-wheel drive) & 4WS (all-wheel steering with crab steering) • Gradeability: 40% • Tires: Foam-filled rough terrain tires Fjdpfxoz Ndyce Al Uogh - Ready for immediate use in original condition! - Good tires! - Well-maintained machine! - Includes CE certification! - On request: new Austrian inspection certificate provided before delivery! Selling price: 28,900.00 EUR net Delivery possible!

Condition: used, mileage: 940,280 km, power: 324 kW (440.52 HP), first registration: 01/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, *Drive and Engine* Engine: DAF MX-11, 320 kW (435 hp), Euro 6 Transmission: AS Tronic, 12-speed, direct drive Rear axle: SR1344, gear ratio 2.64, mechanical differential lock Traction control system (TCS) *Suspension and Axles* Front axle: Single axle, parabolic suspension, load capacity 7.5 t Rear axle: Single axle, air suspension, load capacity 13 t ECAS air suspension at the rear *Cab and Comfort* Cab: Space Cab, metallic painted, central locking Seats: Driver's seat Luxury Air, passenger seat Basic (fixed) Sleeping comfort: Lower bunk with drawer, upper bunk as storage space, cold foam mattress Air conditioning: Air conditioning system, auxiliary heater (air), automatic temperature control Sunroof: Electrically operated Cooler box/refrigerator Radio/USB player, two speakers *Safety and Driver Assistance* Adaptive cruise control with FCW and AEBS Predictive Cruise Control Electronic Stability Control (VSC) Lane change warning system Standard immobilizer MX engine brake *Lighting and Visibility* Halogen headlights, LED daytime running lights, fog lights Front mirror, no exterior sun visor ----* Jost JSK42C fifth wheel coupling, mounting plate 26 mm ----* Fodez N Rlfepfx Al Uegh HYVA hydraulic system ----* Tire dimension: 315/70R22.5 Fuel tank: 545 liters AdBlue tank: 90 liters Technical gross vehicle weight: 20500 kg Unladen weight: Overall length: Wheelbase: 3600 Inspection due: / ----Vehicle number: 12567----Errors and prior sale excepted----Advertising and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. We can offer the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection, complete export handling, arrangement of financing, application for export license plates, vehicle delivery, vehicle registration, recovery and vehicle transport.----YOUR VTS TEAM

Condition: used, mileage: 64,281 km, power: 162 kW (220.26 HP), first registration: 06/1999, overall weight: 10,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, total length: 6,900 mm, total width: 2,300 mm, total height: 2,910 mm, Equipment: ABS, parking heater, A very well-maintained MAN L2000 as a city fire engine (LHF 16/12) from the Berlin Fire Department. Fgsdpfx Alez N Nlqj Ueh Water tank: 1200 liters + foam tank: 100 liters, Rosenbauer 16/8 rear-mounted pump with quick attack connection on the right, hose reel at the rear, and partial equipment load. Tilting crew cab with auxiliary heater and mirror heating, differential lock on the rear axle. Regularly maintained without any outstanding repairs, recent inspection including lubrication and replacement of the air dryer cartridge. The engine runs smoothly and the gearbox shifts well; a very maneuverable vehicle with good tires. Info: We will repair the damaged ladder mount. +++ Ready for immediate use.

Condition: used, mileage: 76,074 km, power: 162 kW (220.26 HP), first registration: 09/2000, overall weight: 10,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, total length: 6,900 mm, total width: 2,300 mm, total height: 2,910 mm, Equipment: ABS, parking heater, A very well-maintained MAN L2000 fire engine, designed for urban firefighting (LHF 16/12), belonging to the Berlin Fire Department. Fedpfjz N Nl Rox Al Ujgh Water tank: 1200 liters + foam tank: 100 liters, rear-mounted Rosenbauer 16/8 pump with quick-attack nozzle on the right side, and partial equipment load. Crew cabin: tilting, with auxiliary heater and mirror heating, differential lock on the rear axle. Fully serviced and maintained with no backlog of repairs; thorough inspection carried out, including lubrication and replacement of the air dryer filter. The engine runs smoothly, and the gearbox shifts easily; a very maneuverable vehicle with good tires. Note: The damaged ladder mount will be repaired by us. +++ Immediately ready for use.

Condition: used, Year of construction: 2016, The shredder breaks down large, bulky pieces of Styrofoam, EPS, and similar materials with a maximum bulk density of 30 kg/m³ into small pieces. The shredder reduces the volume by approximately 65%. Fedpfx Aszlh Tael Ujgh This makes the machine ideally suited for use in industrial and craft businesses as well as for wholesale and retail trade of packaging materials made of Styrofoam. Depending on the screen set, simply shredding your Styrofoam waste achieves a volume reduction of 3:1. Custom-made solutions are available upon request. VAT is stated separately on the invoice. Shipping is included throughout Germany, with an extra charge for island deliveries. If you have any questions, please feel free to contact us.

Condition: used, mileage: 86,041 km, power: 162 kW (220.26 HP), first registration: 09/2000, overall weight: 10,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, total length: 6,900 mm, total width: 2,300 mm, total height: 2,910 mm, Equipment: ABS, parking heater, A very well-maintained MAN L2000 serving as a city fire engine (LHF 16/12) from the Berlin Fire Department. Fjdpfx Aljz N Nlwe Usgh Water tank: 1200 L, foam tank: 100 L, rear-mounted Rosenbauer 16/8 pump with quick attack line on the right, hose reel at the rear, and partial equipment load. Tilting crew cab with auxiliary heater and heated mirrors, differential lock on the rear axle. Regularly maintained without any accumulated repair work, recent thorough inspection with lubrication, and new air dryer cartridge. The engine runs smoothly, and the transmission shifts easily; a very maneuverable vehicle with good tires. +++ Immediately ready for operation.

Condition: used, Year of construction: 2007, operating hours: 1,632 h, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any warranty or guarantee, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Skyjack SJ6832 4x4 all-wheel drive scissor lift Manufactured 09/2007 Maximum working height: 11.70 m Fgedpfx Aljz A I R Do Ujh Maximum platform height: 9.70 m Total operating hours: 1,632, with 1,514 operating hours on the new Kubota engine New Kubota engine installed in 2021 for €7,000.00 (net), with 118 operating hours since, and kept as a backup unit Platform dimensions: 1.42 m x 2.49 m Platform extension: 1.50 m Permissible gross vehicle weight: 3,475 kg Payload: 454 kg Capacity: 2 persons Overall length: 2.72 m x overall width: 1.73 m x overall height (minimum, terrain version, foldable): 2.51 m Diesel engine, 4x4 Gradeability: 40% Travel speed: 0.6 - 6.1 km/h Lifting time with rated load: 39 seconds Driving at full height with extended platform Diesel engine mounted on extendable support Platform extension: 1.50 m Spring-loaded, self-closing full door Foam-filled tires Tilt sensor with alarm and automatic emergency shutdown Hour meter Overload sensors Price: €9,500.00 (net) All information is provided without any warranty or guarantee. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typos, and prior sale are subject to change.

Condition: used, Year of construction: 2021, functionality: fully functional, operating hours: 2,460 h, number of axes: 4, number of slots in tool magazine: 6, actuation type: electric, table length: 15,000 mm, table width: 1,000 mm, Equipment: CE marking, For sale: CNC milling plotter Sentinel E 1015, purchased for wood milling applications. In practice, the machine was used exclusively as a cutting machine for corrugated cardboard. It was not used for heavy-duty wood or metal processing, and its components were not subjected to loads associated with such milling. Technical and visual condition: excellent. Condition and usage history as declared by the seller. P A R A M E T E R S / S E T C O N T E N T S Specifications and equipment ATC spindle, linear tool changer, and vacuum table with rotary vane pump. Working area X: 1000 mm / Y: 1500 mm / Z: 300 mm Fgodpfx Aoz Drmxsl Ush Kinematics: Linear guide Linear transmission: Structural rocker system ATC spindle: Power 8–9.6 kW; automatic tool change Spindle parameters: 24,000 rpm; ceramic bearings; ER 32; ISO 30 Tool changer: Linear, for 6 tools Drives: Digital AC servo drives: 4 × 400 W Vacuum table: HPL plate Machining technology: HSM (High Speed Machining) Measuring systems: Material height sensor; tool length sensor Tool cooling: Compressed air Material clamping: 3-pin clamping system Control: Control cabinet with computer, keyboard, and mouse Tools and accessories included Tool holders: Complete set of 6 ISO 30 tool holders ER 32 collets: Ø 3, 4, 6, 10, 12, and 16 mm Table accessories: Vacuum table seals: 30 m; 2 vacuum table supports Rotary vane vacuum pump included Model: C-VRL 301 Zephyr¹ Motor power: 5.5 kW Nominal capacity: 290 m³/h Final pressure: 150 hPa (mbar) ¹ Designating the pump according to the provided specifications; to be confirmed on the nameplate. M A T E R I A L S / M A C H I N E D E T A I L S Range of applications Machining capabilities depend on the tool used, material thickness, operating parameters, and machine configuration. Wood and wood-based boards: Wood, plywood, OSB, MDF, HDF. Metals: Aluminum, brass, bronze, and other metals, depending on the selected machining technology. Composites and technical boards: Composites, conglomerate, Corian, HPL, Dibond. Plastics and modeling materials: Prolab, polyurethane foam, polystyrene, expanded PVC, Plexi, polycarbonate, acrylic. Materials for cutting with an oscillating head² Technical polyurethane foam, sponge, cardboard, corrugated board, film, leather, fabric, rubber, plastics; Kryngielit, Gambit, Polonit, and other materials and boards.

Condition: excellent (used), Type: Vertical cutting machine Fgjdpfx Alor Iirno Ujh Manufacturer: Albrecht Bäumer Designation IS/M Year of manufacture: 1993 (2017-retrofit mechanical and electrical) Dimensions: Table to the left of the meter 2200 mm Table to the right of the measurer 2200 mm Cutting length 2580 mm Cutting height 1500 mm Side stop right 1200 mm Side stop left 1200 mm foldable motorized grinding unit height-adjustable blade guide Info: ISM vertical cutting machine from Bäumer in top condition The machine was completely overhauled by the manufacturer in 2017 (Retrofit Step 1-4) Machine is still in use and can be inspected by appointment. Further information on request Available immediately Disassembly and transportation must be done by the buyer. Please also note our other sales ads

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard • Leather Fjdpszmqa Eofx Al Ujgh • Rubber • Technical foams • Non-metallic plastics • Other materials compatible with CO₂ laser technology A purchase with guarantees The machine can be seen in operation before dismantling. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Condition: used, mileage: 62,200 km, power: 350 kW (475.87 HP), first registration: 07/2000, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 2000, total width: 2,500 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, all wheel drive, parking heater, * MB Actros 1848 All-Wheel Drive 4x4 with leaf suspension * Superstructure by Ziegler * Water tank 2,480 L * Foam tank 510 L * Powder tank 250 kg * CO2 extinguishing system 480 kg * Foam extinguishing system * Rescue platform and fire-fighting platform at the front, max. height 3.8 m, load capacity 300 kg * External planetary axles * Speed limiter up to 140 km/h * Axle ratio i=4.833 (HL7) * Wheelbase 3,900 mm * V8 engine LA 350 kW (476 hp) at 1,800 rpm * Transmission oil cooling * Auxiliary drive NF1 MB 125-10b, flange, medium speed * Auxiliary drive NZ 1, single * Auxiliary drive NZ 4 with shafts * Drum brakes * Telligent 16-speed gearbox with clutch pedal (automated shifting, clutch pedal foldable) * Reinforced clutch * Transmission G240-16/11.7-0.69 * Transfer case VG2400-3W, 1-speed * Reinforced springs, front and rear axles * Front axle rated at 9 t * Rear axle rated at 13 t * Front axle springs 10.5 t * Rear axle springs 13 t * Weight variant 21.5 t approval (10.0/13.0), e.g. for winter service * Circuit breakers * Reinforced cab suspension * Tires 395/85 R 20, 80-90% Michelin * Technical and operational total weight 20,500 kg * Transfer case with reduction * Differential locks front and rear axle * Reinforced frame * Reinforced stabilizers for extreme heavy-duty applications * Reinforced steering * Medium-length cab * Electric window on passenger side Fgsdpfx Aloy Tq Npo Ush * Air conditioning * Stationary hot air heater Eberspächer D1 LP * Various additional spotlights * Trailer brake system * NATO trailer hitch * and much more * Subject to errors, changes, and prior sale

Condition: used, mileage: 62,200 km, power: 350 kW (475.87 HP), first registration: 07/2000, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 2000, total width: 2,500 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, all wheel drive, parking heater, * MB Actros 1848 All-Wheel Drive 4x4 with leaf suspension * Superstructure by Ziegler * Water tank 2,480 L * Foam tank 510 L * Powder tank 250 kg * CO2 extinguishing system 480 kg * Foam extinguishing system * Rescue platform and fire-fighting platform at the front, max. height 3.8 m, load capacity 300 kg Fedpfsy Tq Rmsx Al Ujgh * External planetary axles * Speed limiter up to 140 km/h * Axle ratio i=4.833 (HL7) * Wheelbase 3,900 mm * V8 engine LA 350 kW (476 hp) at 1,800 rpm * Transmission oil cooling * Auxiliary drive NF1 MB 125-10b, flange, medium speed * Auxiliary drive NZ 1, single * Auxiliary drive NZ 4 with shafts * Drum brakes * Telligent 16-speed gearbox with clutch pedal (automated shifting, clutch pedal foldable) * Reinforced clutch * Transmission G240-16/11.7-0.69 * Transfer case VG2400-3W, 1-speed * Reinforced springs, front and rear axles * Front axle rated at 9 t * Rear axle rated at 13 t * Front axle springs 10.5 t * Rear axle springs 13 t * Weight variant 21.5 t approval (10.0/13.0), e.g. for winter service * Circuit breakers * Reinforced cab suspension * Tires 395/85 R 20, 80-90% Michelin * Technical and operational total weight 20,500 kg * Transfer case with reduction * Differential locks front and rear axle * Reinforced frame * Reinforced stabilizers for extreme heavy-duty applications * Reinforced steering * Medium-length cab * Electric window on passenger side * Air conditioning * Stationary hot air heater Eberspächer D1 LP * Various additional spotlights * Trailer brake system * NATO trailer hitch * and much more * Subject to errors, changes, and prior sale

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors • Controller: Syntec controller (machine can be moved on-site) • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is Fsdpezv U Tbefx Al Uegh possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Condition: used, Year of construction: 2012, functionality: fully functional, PERONI RUGGERO AGD-EI Semi-automatic machine for threading and gluing flat elastic bands onto flat-laid diary/planner covers. Manufacturer: Peroni Ruggero, Via Corsica 31, Varese, Italy Machine type: AGD-EI Year of manufacture: 2012 Technical Specifications: • Cover format: min. 83 × 120 mm — max. 340 × 510 mm • Operating speed: up to 8 pieces/min (480 pieces/hour) • Elastic band width: 5–15 mm • Cover material thickness: 1–2.5 mm (up to 3.5 mm for foam boxes) • Maximum spine thickness: 25 mm Fsdpfx Asz A A D Sel Uegh • Motor power: 4 kW • Air consumption: 150 Nl/min at 7 bar • Machine dimensions: L 1,450 × W 1,400 × H 2,100 mm • Glue heater dimensions: L 700 × W 450 × H 700 mm Price: €19,500.00