Used Extruder Screw for sale (5,444)

Condition: ready for operation (used), Year of construction: 2022, Power: 15kW, maximum shaft speed: 3000rpm, oil capacity: 6l, tank capacity: 500l, operating pressure: 10bar, capacity: 2.2m³/min, control panel: Logik 9, length: 1915mm, width: 650mm, height: 1640mm, weight: 530kg, operating hours: 2h, with Wortmann drukosep 2 oil-water separator. Inspection on site is possible. Laedpfx Ajzhw Rtsh Sef

Year of construction: 2015, condition: ready for operation (used), An oil-free, water-injected Atlas Copco screw compressor is available. Volume flow: 1.3m³-5m³/min, max. pressure: 13bar, motor power: 30kW, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1500mm, weight: approx. 1300kg, operating hours: 46000h. Documentation available. On-site inspection is possible. Ljdpfjudy Sdsx Ah Sjaf

Condition: ready for operation (used), Year of construction: 1999, Automatic Adelski capping machine for automatically closing bottles with screw caps. Number of capping heads: 3, max. capacity: approx. 10000bottles/h, direction of travel: right → left. Including approx. 160000pcs caps. Weight: approx. 1750kg. Documentation and wiring diagrams available. Viewing possible by appointment. Ljdpszg Iq Uefx Ah Soaf

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Lajdpoxq Exqsfx Ah Sef

Condition: ready for operation (used), Conveyor length: 3000 mm, conveyor diameter: 250 mm, on-site inspection is possible, not energized. Laedpszhnu Njfx Ah Sof

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Lajdpfovw Aqhox Ah Ssf

Year of construction: 2006, condition: ready for operation (used), A complete Battenfeld compact extrusion line for the production of PVC profiles is available. 1) Twin-screw extruder Battenfeld MBEX 2-50-16 V, year of manufacture: 2006, output capacity: 15kg-60kg/h, screw diameter: 52mm, screw length: 16×D, barrel zones: 4, barrel cooling zones: 3, adapter zones: 1, die heating zones: 9, control system: BMCtouch. Including dry vacuum pump, pressure measuring points, clamping flange, water-air separator, blow-off device, mounting elements and hopper cover. 2) Calibration table Battenfeld KP 125 V 2/4m, mounting frame length: 4100mm, mounting rail width: 320mm, longitudinal adjustment: 500mm, transverse adjustment: +/-15mm. 3) Speck vacuum system, pumps: 2, motor power: 2×4kW, operating pressure: 200mbar, max. air capacity: 2×140m³/h. 4) Battenfeld RP 125 SE caterpillar haul-off, passage height: 100mm, contact length: 1100mm, pad width: 160mm, haul-off speed: 15m/min, max. haul-off force: 7kN. 5) Battenfeld SP 63 E underfloor saw, max. cross-section capacity X/Y: 200mm/300mm, sawing accuracy: +/-0.5mm. Overall line dimensions X/Y/Z: approx. 12000mm/1200mm/2000mm, weight: approx. 4500kg, operating hours: approx. 319h. Including chip extraction. The line touchscreen is defective (nothing is visible), however, the line can be operated using an external monitor, mouse and keyboard. Documentation available. An on-site inspection is possible. Laodpfezg Iqhox Ah Sof

Condition: ready for operation (used), Year of construction: 2008, A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment. Lodpfx Ahezh Nize Seaf

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Lasdpfx Ajumubyjh Sef Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Condition: used, 2 boring gauge screws, internal measuring screw from the manufacturer Busch D.B.P.a., with foreign patent. 2-point internal micrometer, used Lodpfozumc Sjx Ah Ssaf with wooden case – Friedr. Strack Wuppertal Measuring range [mm] 25-30 / 30-40 Scale value [mm] 0.005 Price on request All technical specifications are subject to typographical errors and errors. Sale exclusively to countries within the EU.

Condition: good (used), functionality: fully functional, power: 250 kW (339.91 HP), Description: Screw compressor ZR 4-52 with drum dryer Laedpfsvyrlaex Ah Sjf Characteristics: Capacity 8.00 bar Power 250 kW Voltage 500 V Air flow rate l/min 634 Running hours at last maintenance: 50307

Condition: good (used), functionality: fully functional, Description: Screw compressor with drum dryer ZR 250 1997 Characteristics: Lajdpfx Ahevyrtde Sof Capacity 7.50 bar Power 245 kW Voltage 500 V

Condition: good (used), functionality: fully functional, Description: Ljdpovyrq Ajfx Ah Ssaf Screw compressor ZR 250 1998 Characteristics: Capacity 7.50 bar Power 245 kW Voltage 500 V

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 305 kW (414.68 HP), Description: Screw compressor with drum dryer ZR315VSD Characteristics: Capacity 8.60 bar Power 305 kW Voltage 500 V Running hours at last maintenance: 46383 Lasdpfjvyq Tpjx Ah Sjf

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 382 kW (519.37 HP), Description: Screw compressor ZR315VSD Lsdpfx Ahovyq Rnj Soaf Characteristics: Capacity 8.60 bar Power 382 kW Voltage 400 V or 500 V Running hours at last maintenance: 7270

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Ledpfx Aon Utt Hoh Soaf Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Year of construction: 2008, condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,685h. Lodpfxjl Dxmfe Ah Soaf

Condition: ready for operation (used), Effective width: 1500mm, screw diameter: 2x 500mm, motor power: 2x 3.5kW, outlet: 2x 800x800mm, length: 7000mm, conveying speed: 50m/min, with steel construction underframe, closed constructional design with bunker walking elevation, an inspection is possible, year of construction unknown, was overhauled in 2022. Lodpfxjn Tpm Aj Ah Soaf

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Lodpfx Ashz Dyajh Ssaf

Year of construction: 1990, condition: ready for operation (used), Max. workpiece diameter: 10-350mm, max. grinding length/ width: 690/ 60mm, clamping length: 950-1330mm, swing angle: -60 to 60°, length: 6200mm, width: 4000mm, height: 2500mm, weight: 9t, with oil filtration system, oil mist extraction and additional accessories. Lsdpfsiph T Hjx Ah Ssaf

Condition: excellent (used), Year of construction: 2018, operating hours: 43,309 h, functionality: fully functional, Screw compressor Atlas Copco GA75VSD+FF Inverter and dryer integrated Lasdpfjzp Urwex Ah Sef 75 kW 12.75 bar 15.50 m3/min Year of manufacture: 2018 Operating hours: 43,309

Condition: good (used), Year of construction: 2002, operating hours: 39,000 h, overall weight: 532 kg, total length: 1,285 mm, total width: 920 mm, total height: 1,050 mm, power: 18.5 kW (25.15 HP), volume flow: 156.6 m³/h, pressure (max.): 10 bar, noise level: 68 dB, Equipment: documentation/manual, type plate available, Very well-maintained Ingersoll Rand screw compressor, in excellent technical and visual condition. Fully serviced and ready for immediate use. New hour meter installed. 18.5 kW, 2.61 m³/min, 10 Bar. Laedpsztl Udsfx Ah Sjf

Condition: new, Year of construction: 2022, Compact screw compressor,new original packed Displacement (2900rpm/50hz) 410m3/h Motor input: 110KW Max.operating current: 182a Lasdpoztz Adjfx Ah Ssf 380-425V/3/50hz Star connection for R134a: Kältemittel R134a Evaporating temp. to +5 °C → po = 3,50 bar (abs.) Condensing temp. tc +50 °C → pc = 13,18 bar (abs.) Cooling cap. = 232 KW (68 refr.tons)

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Laedpfx Ahjzpxhij Sjf Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Year of construction: 2018, 2 spiral conveyors, ambaflex, – used – Price per unit ex works (net): only €8,500 for self-disassembly! Manufacturer: ambaflex Year of manufacture: 2018 Type: SPIRALVEYOR SV Serial number: e.g.: 26811-01 The respective conveying height will be provided later. Diameter and width of the link chains will be provided later! Condition: good Available: from approximately August 2026, or by agreement Location: Erfurt area Two spiral conveyors were installed for the conveying system Ljdozpf Ntopfx Ah Ssaf to transport the cartons from the goods receiving area to the 1st floor and to return them to the ground floor after the packing process. One spiral conveyor is used for the vertical transport of cartons and containers. The spiral conveyor can be used both for the vertical transport of the conveyed goods to another level and as a buffer within the system.