Used Plastic Surface for sale (13,098)

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Lrsdpfx Akez I Iv Rsqou Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 Ledpjzza Egsfx Akqoru The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Year of construction: 2013, condition: used, functionality: fully functional, Equipment: CE marking, "Dual drying system with compressed air expansion + molecular sieve treatment - Weekly timer - Anti-stress system - Compressed air flow rate: 7 - 20 Nm3/h - Maximum temperature: 180 °C - Dew point: -50 °C Ledpfxezlxq Ne Akqjru - Total power: 1 kW - Power supply: 230 V - 50 Hz - Hopper capacity: 50 dm3 - Compressed air pressure: 6-8 bar - Weight: 23 kg"

Year of construction: 1999, condition: good (used), Control or regulator card, type ETR 51. Lsdpfx Akszl T S Uoqsru The circuit board was manufactured by Plastic Service GmbH. 11 pieces available.

Year of construction: 2010, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 Lrsdpoy R S Twjfx Akqju -Side channel blower: Elmo Rietschle -Individual components: see photos Quantity: 1 piece available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, Gravimetric dosing and mixing system: Mixing system with 5 gravimetric dosing units 5 units: • Gravimetric screw dosing unit • Feeding hopper with pneumatic rotary valve, each with a lid • Screw conveyor for feeding from a big bag, with height-adjustable individual stand 1 unit: • Trough screw for combining and conveying the dosed materials into a transfer container. Lsdpjt S Rdujfx Akqjru 5 units: • Big bag feeding station, with a suspension crossbeam to prevent the big bag from collapsing during emptying. • Big bag disc base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control system Delivery EXW

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning Lsdpozmhknefx Akqjru • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Condition: used, Used plastic barrier – lightweight, stable, and space-saving Used plastic barrier with a rotating, weighted base for quickly and safely cordoning off work areas, excavations, and roadworks. Thanks to its low weight, the barrier is easy to move and can be quickly deployed in various locations. The reflective strip on one side provides extra visibility. Thanks to the quick-release system, multiple barriers can be securely connected, even on uneven surfaces. 🔧 Specifications Dimensions: 200 x 100 cm Ljdpfe Aaxa Djx Akqoru Weight: approx. 11 kg Material: Recycled plastic Condition: Used Signaling: Reflective strip on one side Base: Weighted, rotating base Connection: Quick-release system ✅ Advantages Lightweight and easy to move Extra visibility thanks to reflective strip Can be securely connected with a quick-release system Suitable for uneven surfaces Rotating base for efficient stacking Up to 53% more efficient storage than traditional barriers Quick to set up and remove Application Suitable for temporarily cordoning off roadworks, excavations, construction sites, work areas, and other locations where a quickly deployable and highly visible barrier is needed.

Condition: new, functionality: fully functional, GS-1200 twin-shaft industrial shredder - low-speed, high-torque size reduction for the tough material that chokes single-shaft machines and hammer mills. Two counter-rotating shafts with 48 intermeshing shear cutters pull material in and cut it down - no daily sharpening, no babysitting. PLC control reverses the shafts automatically if a hard object jams the chamber. KEY SPECS - Cutting chamber: 47 x 24 in (1,200 x 600 mm) - Cutters: 48 rotary shear cutters, 9CrSi alloy tool steel - Motors: 2 x 30 kW (60 kW total / 80 HP) - Capacity: approx. 5 tons/hour, depending on material - Footprint: 159 x 71 x 91 in - hopper can be customized RUNS ON: food and organic waste, green waste and plant fiber, wood and pallets, plastics, rubber and bulky solids. Pair it with our CT Series screw presses for a complete shred + dewater line - one supplier, one responsibility. A working shredding video is included with this listing package. Built to order - electrical built to your plant (480V or 440V, 3-phase, 60 Hz). Full spec sheet available, just ask. Lrodpfe Adylpsx Akqeu ZEN SURFACE LLC. Message us through this listing for details, pricing and a live material demo.

Condition: used, DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (like new!!) Dyemansion Powershot C blasting cabinet Gentle cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0, Year of manufacture: 2021 The industry standard for simple and efficient powder removal Automated powder removal increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time required for part cleaning and the personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated powder removal with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blasting cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts contained within. This configuration guarantees efficient powder removal. High user comfort with improved ergonomics and process control Experience a new level of process control with a touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5x full Stratasys H350 build volume Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space required in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: 1kW Lsdpfx Akozgr T Tjqoru Requirements 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4 m³/min at 2.2 bar Maximum: 1.8 m³/min at 5 bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions for you by telephone.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Ljdpfezylxiex Akqsru Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: new, New plastic barrier – lightweight, stable, and space-saving New plastic barrier with a rotating, weighted base for quickly and safely cordoning off work areas, manholes, and roadworks. Thanks to its low weight, the barrier is easy to move and can be quickly deployed in various locations. The reflective strip on one side provides extra visibility. Thanks to the quick-release system, multiple barriers can be securely connected, even on uneven surfaces. Specifications: Dimensions: 200 x 100 cm Weight: approx. 11 kg Material: Recycled plastic Condition: New Signaling: Reflective strip on one side Base: Weighted, rotating base Connection: Quick-release system Advantages: Lightweight and easy to move Extra visible thanks to the reflective strip Securely connectable with the quick-release system Suitable for uneven surfaces Rotating base for efficient stacking Up to 53% more efficient storage compared to traditional barriers Quick to set up and remove Lrjdpfj Aaxcrsx Akqju Application: Suitable for temporarily cordoning off roadworks, manholes, construction sites, work areas, and other locations where a quickly deployable and highly visible barrier is needed.

Condition: like new (used), functionality: fully functional, total width: 15,000 mm, total length: 240,000 mm, total height: 9,000 mm, Model: Saxon 5 Manufacturer: Fischbein Machine type: Continuous hot‑air bag sealer Lrodpfx Asz H T Dwekqou Power: 220V single‑phase, 66 A Typical use: Sealing pillow‑style heat‑sealable plastic bags in fast‑paced production lines

Condition: used, Tray sealer that closes pre-formed trays with film The Meca Plastic S3000 is a tray sealer: you place pre-formed trays with product in the tooling, the machine brings them under the sealing head and seals a top film onto them. The machine has a touchscreen with Dutch menus where the sealing temperature, pressure and speed are set per programme. The tooling fitted takes two trays per cycle; tooling is matched to the tray size, so a different tray needs different tooling. The machine was built by Meca Plastic in Pouzauges, France. The type plate is there, but the filled-in fields are no longer legible, so year and serial number are not known. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Tray sealer Lrsdpfx Akjz Ndh Sjqeu Controls: Touchscreen with programmes, Dutch menus Sealing temperature: Adjustable per programme Tooling: 2 trays per cycle, matched to the tray size Construction: Stainless steel, on castors

Condition: new, functionality: fully functional, NEW CT-300 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 3 tons/hour (5 m3/h) - Motor: 15 kW / 20 HP - 480V, 3-phase (440V compatible) Ledpe Adyk Eofx Akqeru - Screw speed: 25 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: hydraulic or pneumatic adjustable back-pressure - Footprint: 163 x 35 x 77 in - Weight: 5,000 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: new, functionality: fully functional, NEW CT-400 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 5 tons/hour (8-10 m3/h) - Motor: 30 kW / 40 HP - 480V, 3-phase (440V compatible) - Screw speed: 20 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: hydraulic or pneumatic adjustable back-pressure - Footprint: 177 x 39 x 79 in - Weight: 7,050 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Lsdpfs Adyk Sex Akqeru Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: used, Year of construction: 1991, grinding length 600 mm grinding width 375 mm workpiece height 375 mm workpiece weight 300 kg table surface area 900 * 350 mm grinding spindle speed 1500 / 3000 U/min dimensions of grinding wheel 300 x 50 x 76,2 mm weight of the machine ca. 3,3 t dimensions of the machine ca. 3,1 x 2,6 x 2,1 m MICRO GRANIT has excellent properties for high-precision grinding machine construction. Damping properties: 1:10 ratio compared to gray cast iron, ensures the best grinding quality. Thermal behavior: suitable for grinding operations with µ tolerances. X-axis – table longitudinal movement: - Table switching: extremely quiet, contactless. - Quick adjustment: via cams. - Work table: Mehanit cast iron. - Guide system: two precision flat guides. - Lubrication: plastic coating. - Drive: hydraulic, automatic. - Table stroke: 100–250 mm. - Table speed: 40 m/min. - Switching: via cams, contactless. Ljdpfx Ajzycnnokqeru - Hydraulics: horizontal monoblock. - Table cycle: 30 min. Y-axis – Vertical adjustment of the grinding wheel: - Play-compensating mechanism: > ensures even contact with the guides. - Vertical movement: > via precision lead screw. - Drive: adjustable electric motor.

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Ljdpfez Rqk Rox Akqoru Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Condition: new, functionality: fully functional, NEW CT-200 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. KEY SPECS - Capacity: 1 ton/hour (1-2 m3/h) - Motor: 5.5 kW / 7.5 HP - 480V, 3-phase (440V compatible) - Screw speed: 30 RPM - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: hydraulic or pneumatic adjustable back-pressure - Footprint: 102 x 30 x 55 in - Weight: 1,500 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo. Lrsdps Adykxjfx Akqsu

Condition: used, Year of construction: 1960, functionality: fully functional, x-travel 500 mm Lodozkbqiopfx Akqoru breite 450 mm serial number 386 weight of the machine ca. 1,8 t

Condition: good (used), Year of construction: 2014, machine/vehicle number: 59 526 05 221 0010, functionality: fully functional, operating hours: 1,000 h, power: 20 kW (27.19 HP), input voltage: 380 V, input current: 33 A, type of input current: three-phase, temperature: 650 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,800 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 350 kg, number of chambers: 1, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, Hardening furnace Vötsch VAW 60/100, in good condition. For sale due to business closure. Lsdpoz Rnwhefx Akqeru Very reliable furnace; the temperature difference in the combustion chamber at 500°C is +/- 15°C. The furnace was operated at a maximum temperature of 500°C during production. The door seal is in good condition. The new price was EUR 38,000.

Condition: used, Year of construction: 1962, grinding length 450 mm grinding width 250 mm workpiece height 275 mm table surface area 760 x 200 mm distance spindle center to table max. 400 mm table speeds 0 - 30 m/min cross feed 0 - 60 mm/Hub Ledpfx Aj Adalpekqoru rapid traverse cross 1,2 m/min grinding wheel size ø 250 x 30 x ø 51 mm grinding spindle speed 1400 / 2800 U/min total power requirement 4 kW weight of the machine ca. 1 t dimensions of machine L x W x H 1,55 x 1,23 x 1,80 m Accessories: magnetic plate 450 x 175 mm, grinding wheel with flange, wet grinding attachment

Condition: repair required (used), Year of construction: 2019, operating hours: 14,967 h, functionality: not functional, machine/vehicle number: 750090, total height: 1,885 mm, total width: 800 mm, total length: 1,240 mm, We are offering this Arburg freeformer 200-3X machine for processing thermosetting plastics, year of manufacture 2019, which requires repair. Description of fault: Extrusion unit 1 is functioning correctly. Extrusion unit 2 is defective (the Arburg service technician suspects a problem with the piezo element or piezo driver). The machine had problems starting up. However, after repeated restarts, it is now functional. Manufacturer: Arburg Model: freeformer 200-3X with dual material preparation Year of manufacture: 2019 Condition: in need of repair Category ID: 1208 Type ID: 1354 Machine type: Machine for thermosetting plastics Ljdpe Adprlefx Akqsru Machine number: 750090 Air heat exchanger for active machine temperature control Build chamber heating up to 120°C and temperature control for plasticization up to 300°C Equipment for inline material drying for material preparation 1 and 2 Data preparation software (slicer) incl. license If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1107, total height: 1,700 mm, total length: 1,000 mm, total width: 900 mm, overall weight: 350 kg, For sale is a compact surface grinding machine from the German manufacturer Degen. Model FSM300E. In very good used condition. The machine has seen little use. A very high-quality and precise machine, ideal for tool or prototype construction. Due to its small footprint, it is also suitable for small workshops. Lrsdpfoz E S Hbex Akqju Grinding length: 300mm Cross travel: 170mm Max. distance between magnetic chuck and grinding wheel: 290mm Rapid traverse in height adjustment Magnetic chuck: 300x150mm Space requirement: length 1.0 m x width 0.9 m x height 1.7 m Machine weight: approx. 350kg Includes coolant system, electromagnet, wheel dressing device, and extraction system. The machine runs perfectly and grinds with precision. Can be tested while powered on. Location: 5023 Salzburg.

Year of construction: 1959, condition: used, Operating voltage: 380V, connected load: 3.05kW, weight: 1.1t, an on-site inspection is possible. Lodpfs Aalnzex Akqoru