Used Hand Tapping Machine for sale (68,714)

Condition: good (used), Year of construction: 1991, Thread cutter, thread cutting machine, thread drilling machine, internal thread drilling machine -Photos: Quick-change photos, see images -Clamping table: 160 x 160 mm -Nominal input: 200 watts -Spindle stroke: 45 mm -Max. cutting power: 2 to 65 Nm -Connection: 220 volts Ksdpjylzqaefx Ab Tjln -Dimensions: 380/290/H680 mm -Weight: 39.5 kg

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition Kljdpfx Abedzqccs Tsn

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Ksdjwhf Hfepfx Ab Tsln Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Kjdpjdzqa Hofx Ab Teln Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: excellent (used), Tapping attachment Efem size 4 (28550) Mounting MK 3 Klodpfx Aeuf N S Aeb Tjn Taps from M 10 - M 24 automatic changeover right - left Total length 295 mm Diameter 105 mm

Condition: good (used), max. threading capacity up to M 6 with guide cartridge throat 130 mm drive power 0,55 kW dimensions L x W x H approx. 350 x 650 x 750 mm weight approx. 90 kg Accessories / special features: - Threaded guide cartridges: 1 x pitch 0.5 mm 1 x pitch 0.6 mm Ksdpfx Asnyh Tnjb Tsln 1 x pitch 0.7 mm 2 x pitch 0.8 mm 1 x pitch 1.0 mm - Various adjustable working cycles such as: Automatic, foot operation Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), - Pneumatic motor GAMOR - Reinforced am structure made of hard aluminum (parallelogram) - Table fixing column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900mm - min: 200mm - Working air pressure: max: 7 bar - 840 lt/min - Weight: 18 kg Klsdpoydlzyofx Ab Tjn Sold without the welding table (as seen in the pictures), only the machine, which can be mounted on a table or similar.

Condition: ready for operation (used), functionality: fully functional, Electric index tab punching machine with automatic positioning for A5 or A4 formats, 2 - 31 tabs, capacity up to 25 sheets. The Onglematic 7 features a built-in, 90° inner round blade. With the Onglematic 7 index tab punch, both loose sheets and bound documents can be processed. Automatic punching is triggered by foot switch activation. Automatic or manual feed after each punch, as well as automatic paper clamping. Klsdpsx Hh N Tefx Ab Tjn

Condition: ready for operation (used), Wörner AGE 6 bench tapping machine Tapping machine Kedpoukq I Dofx Ab Tsln throat depth: 130mm Thread depth: mechanically adjustable Two speeds Foot operation Manual and automatic operation possible. Space requirement: approx. 650mm x 350mm x 750mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle Kodpfoyah R Nox Ab Tjln 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: new, Hydraulic Thread Tapping Machine Manufacturer: CMA Model: RHR 24D Plus Condition: New machine Standard features: - Ball-bearing parallel arm - Hydraulic unit - Digital speed display - Digital depth adjustment - Clamping table 800 x 600 mm (T-slot: 19 mm) - Quick-change chuck - Micro spray system for tool lubrication - Base frame Klsdpeyazfyjfx Ab Tjn - Operating manual

Condition: excellent (used), Cutting range: M3-M10 in steel Klodeyg Dhwopfx Ab Tsn M3-M16 in cast iron M3-M18 in light metal and brass Spindle speeds: 120-240-180-360-300-600 rpm Includes 1 new tap chuck Everything works smoothly and well.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, VOLUMEC Electric Tapping Machine Model: JT3750M EVO2 – Made in Italy Configured as follows: Balanced 3-arm jointed system made from special aluminum Adjustable angle head for tapping threads in any position Includes alignment magnet Brushless technology electric motor, 220 V Simple speed adjustment via potentiometer Quick-change holder, size 3 Table mounting column Technical documentation CE-compliant version Technical data: Ksdjyia Txjpfx Ab Teln Tapping capacity in steel: M8 – M36 Speed: 10 – 150 rpm Max. working radius: 1,900 mm Holder: Size 3 Weight: 25 kg Including the following special accessories: VOLUMEC automatic lubrication system VOLUMEC touchscreen control VASTC Subject to errors and prior sale!

Condition: good (used), Year of construction: 2003, Offer 25508 High-table tapping and drilling machine with leadscrew Technical data: - Thread tapping capacity: M2 up to M10 - Threads per hour: up to 2400 - Drilling capacity in steel: 18 mm - Drill spindle mount: Morse taper 2 (MK2) - Drilling depth: 100 mm Kjdpfx Abeygk Idj Tjln - Threading depth: 60 mm - Spindle to column distance: 215 mm - 4 drill spindle speeds: 320 – 1600 rpm - Table size: 350 x 290 mm - Spindle to table distance: approx. 150 – 520 mm - Cycle-controlled coolant spray system with pneumatic connection - Drive: 400 V / 0.55 kW - Space requirement: approx. W 580 x H 1430 x D 750 mm - Weight: approx. 150 kg

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm Kodpfxei Huvhj Ab Tjln -Weight: 402 kg

Year of construction: 1970, condition: used, Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm Kljdpfx Asd E R R Seb Ten -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

Condition: used, Thread cutter, tapping machine, tapping machine -Nominal consumption: 280 watts -Max. Cutting capacity: M8 -Connection: 220 volts -Dimensions: 290/200/H60 mm Klodpfx Aod R Nfqjb Tsn -Weight: 2.1 kg

Condition: used, Thread cutter, tapping machine, tapping machine -Integrated reversing gear with fast reverse Klsdpfx Abjcm I T Ue Ten -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.3 kg

Condition: good (used), Tapping machine, bench drilling machine -Spindle mount: B12 Klsdpfx Aeb A Imxeb Ton -Tap chuck: Tapmatic 30 X M1.5-M7 -Projection: 165 mm -Motor power: 0.25 kW -Weight: 60 kg

Condition: used, Type: RF 1 Machine No.: 2656 Year of manufacture: 1965 Motor power: 1.0 / 1.4 kW Spindle mount: MK 3 with drawbolt thread Table size approx.: 450 x 150 mm Estimated weight approx.: 600 kg Dimensions (W x D x H approx.): 1 x 0.6 x 1.6 m Kodpfxeycq Ivs Ab Tsln

Condition: new, Year of construction: 2025, Speeds: Level 1: 37-185 rpm Level 2 150-750 rpm Torque in Nm 165+42 Holder size 2 diameter 31 Capacity M3-M24 Working range R = 1800mm Working height (without wheels) 805mm Includes: Ball-bearing, wear-free parallel arm radius: 1800mm 400V/3ph hydraulic system Clamping table 800x600mm with 3 T-slots 19mm Klsdpfxsvu Uhto Ab Ten Working and return speeds can be set separately electronically (using a frequency converter) Digital depth setting D-Touch, work cycle of your choice Manual: direction of rotation right/left using push buttons Automatic: digital input of depth, the direction of rotation is reversed at the set depth. Digital speed display (in the D-Touch control) Micro spray system for tool lubrication (integrated in the machine head) Quick-change holder for Bilz thread cutting holder with slip clutch, among others incl. 1 set of running wheels 1 set of thread cutting holder M4-M22/24 1 piece reducing ring for M4

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Kedpfx Absu R S Elo Tjln Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm Kljdpfx Abotnh Alj Ton MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: good (used), Drilling capacity: up to 10 mm Spindle mount: drill chuck Speed range: Diameter pulleys Motor side: Spindle side: 38; 48; 66; 78 mm 90; 104; 120; 133 mm Motor speed: 800 rpm stroke: 100 mm throat: 300 mm table: 400 x 400 mm distance table - drill chuck max: 580 mm distance table - drill chuck min: 130 mm table: 400 x 400 mm footprint: 750 x 480 mm total power: 0,4 kW Kedpfxjh Hrkie Ab Teln accessories/equipment: drill chuck Condition: good weight: 170 kg dimensions: 750 x 480 x 1.450 mm

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. This is the heaviest die in this format. Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Engine: 11 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” Klsdeu Ul Tzepfx Ab Ten We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom.