Used Internal threading machines | nominal diameter up to size M8 for sale (19)

Condition: used, HÜLLER Type UG8 Internal Thread Cutting Machine Mach. No. 626, built approx. 1970 Cutting capacity: M8 in steel M9 in cast iron M10 in brass Throat 200 mm Table size 270 x 270 mm Spindle speed 700 - 1000 - 1400 rpm, 3 speeds Motor power 0.3 kW Power supply 380 volts, 50 Hz - Spindle speed controlled by gears with three gear stages - Thread pitch controlled by change gears, machine equipped with change gears for 0.5 / 1.25 mm pitches - RÖHM 1 - 10 mm quick-action chuck - Electric foot switch for triggering - Manual head height adjustment via crank Space required (L x W x H): 650 x 430 x 1200 mm Nelheic R I Hscdw Esla Weight 190 kg Good condition

Condition: good (used), Thread cutter, tapping machine, tapping machine Nljlhcdeb A N Ihsw Esa -Integrated reversing gear: with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg

Condition: used, Table threading machine M1 - M10 Height adjustment via toothed rack and hand crank, Nsljda I E Dehcdw Esla motor 0,22+032 kW motor rpm 1420/ 2770 spindle Upm 480 - 580 Weight 100 kg Tapping chuck with key Under table Connection cable with 16 A CEE plug

Year of construction: 1995, Condition: ready for operation (used), 1 brought threading machine Manufacturer: Microtap Type: Megatap II Year of manufacture: 1995 Technical data: - Operating voltage, machine standard 230 V ± 10 % version microtap II - Frequency 50/60 Hz - Power consumption - Version G8/ 230 V 16 A / T (slow) - Compressed air unlubricated (ZAP - operation) min. 200 kPa (2 bar) max. 800 kPa (8 bar) - Compressed air unlubricated (MMS - operation) min. 400 kPa (4 bar) max. 800 kPa (8 bar) - Torque - Version G8 50 to 700 Ncm - Rotational speed - Version G8 300 up to 3.000 min-1 - Spindle stroke version Version G8 max. 85 mm - achievable thread depth version G8 max. 75 mm Nlolhcdwsim Iqqo Esa - achievable accuracy of depth measurement 0,1 mm (without consideration of the tolerance of the tool holder) Operating instructions Dimensions, weights - Dimensions over all approx.: (L (depth) x W x H in mm) Version G8/14/16 - with column 750 mm at max. adjustment travel 544 x 312 x 1047 - With a higher column, the height dimension increases by the difference of the column height. - Machine type Spindle Tool holder Version G8 Taper B12 SZS / Quick change system SWS1 Working ranges - Adjustment travel of the columns in Z-direction (without tool) Column type Version G5 Version G8 Version G14 /16 750 mm approx. 430 mm approx. 400 mm approx. 388 mm - Thread capacity (cutting) - Version G8 M 2.5 - M 8 (X5CrNi189) (Metric ISO standard thread; M 2.5 - M 10 (9SMn28)

Condition: good (used), max. threading capacity up to M 6 with guide cartridge throat 130 mm drive power 0,55 kW dimensions L x W x H approx. 350 x 650 x 750 mm weight approx. 90 kg Accessories / special features: - Threaded guide cartridges: 1 x pitch 0.5 mm 1 x pitch 0.6 mm 1 x pitch 0.7 mm 2 x pitch 0.8 mm 1 x pitch 1.0 mm - Various adjustable working cycles such as: Automatic, foot operation Nlslhcdwonyh Tnj Eea Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: MT1212_25, Multitapper 1212 automatic threading machine CoastOne - Made in Finland New machine Working area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optional 4) Nlslhcevnrfpsdw Eea 2x thread cutting; 1x countersink drilling station Micro lubrication for every spindle / tool station Control: TC15 touchscreen Numerical entry, import of punches - NC files

Condition: good (used), Drilling capacity: up to 10 mm Spindle mount: drill chuck Speed range: Diameter pulleys Motor side: Spindle side: 38; 48; 66; 78 mm 90; 104; 120; 133 mm Motor speed: 800 rpm Nslhcdweh Hrkie Ejla stroke: 100 mm throat: 300 mm table: 400 x 400 mm distance table - drill chuck max: 580 mm distance table - drill chuck min: 130 mm table: 400 x 400 mm footprint: 750 x 480 mm total power: 0,4 kW accessories/equipment: drill chuck Condition: good weight: 170 kg dimensions: 750 x 480 x 1.450 mm

Condition: used, Thread cutter, tapping machine, tapping machine -Nominal consumption: 280 watts -Max. Cutting capacity: M8 -Connection: 220 volts Nlsled R Nfqohcdw Eoa -Dimensions: 290/200/H60 mm -Weight: 2.1 kg

Condition: new, thread dia. M3 - M8 mm Nlolhcdsfg U Snow Eja

Year of construction: 2023, Condition: new, Model: R950-08 Power: M2-M8 Speed (rpm): 700 Air demand: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 18kg Adapter mounting: TCS 1B Model: R950-12 Power: M3-M12 Speed (rpm): 400 Air demand: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 18kg Adapter mounting: TCS 1B Model: R950-16 Power: M3-M16 Speed (rpm): 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 25kg Adapter mounting: TCS 2B Model: R950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Nlolsipmpzjhcdw Eoa Model: R950-022 Power: M3-M22 Speed (rpm): 120 / 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Model: R950-027 Power: M3-M27 Speed (rpm): 70 / 220 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Standard accessories: - Parallel arm - Air motor - 6 safety quick change tapping collet of your choice - Guide column with mounting flange - Radial boom (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Condition: not inspected (used), - Horizontal threading machine -second hand- - with 2off CHIRON threading units 751-1 Nslhjhq Uu Iocdw Esla - center hight app. 135mm - distance between chucks app. 450mm - electrical power each unit 0,25kW - spindle speed of motor: 820rpm - max. threading capacity: M6

Condition: excellent (used), Year of construction: 2025, Functionality: fully functional, machine/vehicle number: MT1212_2025, Multitapper 1212 automatic threading machine CoastOne - Made in Finland New machine Nljlhcdsvnrfcjw Esa Working area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optional 4) 2x thread cutting; 1x countersink drilling station Micro lubrication for every spindle / tool station Control: TC15 touchscreen Numerical entry, import of punches - NC files

Condition: ready for operation (used), Wörner AGE 6 bench tapping machine Tapping machine Nloleukq I Djhcdw Esa throat depth: 130mm Thread depth: mechanically adjustable Two speeds Foot operation Manual and automatic operation possible. Space requirement: approx. 650mm x 350mm x 750mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved

Condition: used, Thread cutter, tapping machine, tapping machine -Integrated reversing gear with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 Nlolhcdscm I T Uew Eja -Connection: 230 volts -Weight: 2.3 kg

Condition: new, thread dia. M3 - M12 mm Noled Iinuehcdw Esla 400 U/min. 28 Nm air pressure 6 - 8 bar working area 150 - 1900 mm weight of the machine ca. 12 kg Pneumatic Tapping Machines for M3 - M12 thread, angle adjustable. 6 pcs. Keyless chuck with clutch. optional: Working table with T-slots: 750x600x650mm 990x700x800mm or. Magnetic base. Available up to max. M16, M22 and M33.

Condition: excellent (used), Year of construction: 2025, Functionality: fully functional, machine/vehicle number: MT1212_12025, working range: 1,250 mm, overall weight: 1,100 kg, compressed air connection: 8 bar, warranty duration: 36 months, table height: 800 mm, working height: 800 mm, Multitapper 1212 automatic threading machine CoastOne - Made in Finland New machine Working area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optional 4) Njlhcdwjvnrd Eo Ejla 2x thread cutting; 1x countersink drilling station Micro lubrication for every spindle / tool station Control: TC15 touchscreen Numerical entry, import of punches - NC files

Condition: used, Thread cutter, tapping machine, tapping machine -Integrated reversing gear: with fast reverse -Nominal consumption: 280 watts Nslhcdwsb A N Iio Esla -Max. Cutting capacity: M8 -Connection: 230 volts -Weight: 2.5 kg

Condition: used, Thread cutter, tapping machine, tapping machine -Integrated reversing gear: with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts Nlslheb A N Ikecdw Esa -Weight: 2.5 kg

Condition: used, Thread cutter, tapping machine, tapping machine -Manufacturer: Fein, tapping machine type ASg 636 -Rated consumption: 280 watts -Max. Cutting capacity: M8 -Speed: 450 rpm -Connection: 220 volts -Number: 2x tapping machine available -Price per piece -Dimensions: 330/150/H80 mm -Weight: 2.3 kg Nljlhcjb A N Ibsdw Eja