Used Internal thread cutting machines thread M 9 - M 12 for sale
8
thread capacity M 10
threading depth 80 mm
throat 250 mm
table-size 290 x 350 mm
spindle turning speed range 120 - 600 U/min
quill stroke 80 mm
thread capacity min. 3 mm
dayligth 370 mm
spindle taper bt 16
total power requirement 0,6 / 1,2 kW
weight of the machine ca. 180 kg
dimensions of the machine ca. 0,5 x 0,7 x 0,86/1,17 m
Condition: ready for operation
Beocl89nwi
Electric 380 Volt
Base
Thread cutting machine in table version, threads with guide cartridge or without
with feeling...
7
thread dia. M3 - M12 mm
400 U/min.
25 Nm
Drx2ll3fk
air pressure 6 - 8 bar
working area Radius 1000 mm
weight of the machine ca. 12 kg
Demonstration machine!
Pneumatically driven tapping machine for M3 - M12 thread with:
- stable and flexible working arm.
- 6 pcs. Quick-change chuck with slip clutch.
Documentation in English !!
optional:
- Clamping table with T-slots clamping surface 900 x 600mm
2
Threaded snowing machine Hahn and Goebel HG 12E
Spindle rotation 180-900 rpm
380v
Bfa8qxskzo
MaschNr.1917/16
M4-M65
3
thread dia.:12 mm
threading length:60 mm
Gxkuj98fe
throat:95 mm
spindle turning speed range:1420 U/min
total power requirement:1,25 kW
weight of the machine ca.:47 kg
dimensions of the machine ca.:0,28 x 0,23 x 0,97 m
Tapping of M3 - M16
3xygcll0b
Drilling D 3-30 mm
Recording MK3
-Feed
Speed control (belt put around by hand)
-Speed: from 100 to 1120 RPM
Weight 280 kg
High current 16A
-Dimensions: approx. 1900x800x600mm
-Tischmasse about 400x550mm
2
for internal thread: M 1 - M 10
Fnl3j3sx
Table size: 150 x 200 mm
Projection: enlarged 200 mm, can be reduced to 100 mm
Spindle speeds: 480/580 rpm
Operating voltage: 380 V
Total power requirement: 0.3 / 0.4 kW
Required space: 450 x 300 x 870 mm
Weight: approx. 100 kg
2
Stations: 8
Bkal7u90c7
test unit: 1
tapping unit:
1 piece M4
2 pieces M10x1
Dimensions (LxWxH)1400x1600x1400 mm
6
General / technical data:
used automatic threading machine working over lead screws in good condition
6 spindle speeds from 200 to1000 rpm
threading capacity in steel: M3to M10
table surface: Ø 200mm for the mounting of a clamping device
throat depth: 250mm
column diameter: 100mm
Tool holder: System Bilz type WES(R) size 2
Automatic working cycle, manual release
Dimensions: (h x w x d) 1800mm x 600mm x 1200mm
Motor power main spindle : 0,75 KW
Power supply 380 Volt 50 HZ
weight : 250 kg
Accessor...
5
thread dia. 12 M max.
turning speeds 400 U/min
thread M 3 - M 12 M
working area 1600 R max.
working range 500 Rmin.
weight 16 kg
Description:
The AT II models have a radius of up to 1600 mm and thanks
to their construction a flexible workspace.
For professional use. Easy to mount on a worktop.
Furnishing:
- Tool holder with 6 cutter holders
M3 20111812 DIN 371 19
M4 20111814 DIN 371 19
M6 20111816 DIN 371 19
M8 20111817 DIN 371 19
M10 20111818 DIN 376 19
M12 20111820 DIN 376 19
-...
7
thread dia. 12 mm
375 U/min.
working area 180 - 1000 mm
engine output 0,7 kW
Bh73y2dhnm
5
Country of origin Germany - Soest
Approximate weight: 250 kg
Dimensions (Lxwxh) approx.: 500 x 900 x 1700 mm
3ypyvmqzf
For taps 4-16 mm table size 355 x 255 mm, throat depth 200 mm, foot pedal and coolant system
1
Pneumatic threading machine up to M12
Speed: 400 revolutions / minute
Thread: M3-M12
Working radius max: 1900mm
Zgvokzbx
Working radius min: 200mm
Quick change insert size: TCS 1B
Compressed air motor/ spindle
Parallel articulated arm
Compressed air/ maintenance unit
6 safety slip clutches included
Mounting column with flange
2
Tapping machine with 4 speeds
I 160 II 205
III 258 IV 324 rpm
N8mvd
2
Air Tapping Machine /Pneumatic tapping machine
For Tap M3-M12
Speed (rpm) 400
Work Range Rmax 1900 mm Rmin 200 mm
Weight 23 kG
Standard Accessories
- Pneumatic tapping Spindle
- Stretch arm
- Slanted arm
- Table mounting column
- Air unit
- Choose any six safety clutch tapping adapters
23jg79nyw
- 90° and Various Degree Tapping Device
6
- Capacity M2-M12
- pneumatic
Bngyrdhg
- Working range 915 mm
- Tap holder 19 mm
- Speed 0-350 t/m
- Including 6 taps
- Exclusive work table (extra work table)
10
thread dia. M3 - M16 metrisch
Wgwbxva
300 U/min.
working area max. 1050 mm
engine output 0,6 kW
weight 25 kg
dimensions 700 x 600 x 200 mm
Electric tapping machines for M3 - M16 threads,
Adjustable angle.
Quick change chuck with slip clutch.
Adjustable via display:
variable speed, adjustable depth, material selection, choice of
Main direction of rotation, thread selection.
Optional:
Clamping table with grooves, type: FL-WB
1
Pneumatic threading machine up to M8
Speed: 400 revolutions / minute
Thread: M3-M12
Working radius max: 950mm
Working radius min: 100mm
Bsz7iwwavi
Quick change insert size: TCS 1B
Compressed air motor/ spindle
Parallel articulated arm
Compressed air/ maintenance unit
6 safety slip clutches included
Mounting column with flange
1
Air Tapping Machine /Pneumatic tapping machine
For Tap M3-M12
Speed (rpm) 400
Work Range Rmax 950 mm Rmin 100 mm
Weight 16 kG
Standard Accessories
- Pneumatic tapping Spindle
- Stretch arm
Srdwneaf
- Slanted arm
- Table mounting column
- Air unit
- Choose any six safety clutch tapping adapters
8
thread dia. M3 - M12 metrisch
400 U/min.
0 6 - 8 bar
working area max. 1000 mm
weight 15 kg
dimensions 700 x 280 x 200 mm
Pneumatic tapping machine
Version with an adjustable angle, horizontal Tapping possible
Pneumatic tapping machines for M3 - M12 threads, angle adjustable.
Zjxxc
6 quick-change chucks with slip clutch.
Optional: clamping table with grooves, type: FL-WB
2
Air Tapping Machine /Pneumatic tapping machine
For Tap M3-M12
Speed (rpm) 400
Work Range Rmax 950 mm Rmin 100 mm
Weight 16 kG
Standard Accessories
- Pneumatic tapping Spindle
- Stretch arm
- Slanted arm
- Table mounting column
Bwnxu0pu
- Air unit
- Choose any six safety clutch tapping adapters
- 90° and Various Degree Tapping Device
10
thread dia. M3 - M16 metrisch
250 U/min.
Jy9ipqtf
0 6 - 8 bar
working area max. 1200 mm
weight 15 kg
dimensions 700 x 280 x 250 mm
Pneumatic tapping machine
Version with an adjustable angle, horizontal Tapping possible
Pneumatic tapping machines for M3 - M12 threads, angle adjustable.
6 quick-change chucks with slip clutch.
Optional: clamping table with grooves, type: FL-WB
1
Air Tapping Machine /Pneumatic tapping machine
For Tap M3-M12
Speed (rpm) 400
Got3kan
Work Range Rmax 1900 mm Rmin 200 mm
Weight 23 kG
Standard Accessories
- Pneumatic tapping Spindle
- Stretch arm
- Slanted arm
- Table mounting column
- Air unit
- Choose any six safety clutch tapping adapters
Used Internal thread cutting machines thread M 9 - M 12
Search Machineseeker now with more than 200,000 used machines:This may be of interest to you
Olympic Games: Machineseeker sponsors Team Germany
Sample sales contract for used machines in nine languages
Sell now on Machineseeker! Over 250,000 inquiries per month
10 valuable tricks for buying used machines online
Machineseeker still biggest sponsors of 2nd German football league
Morlock Motors official partner of Machineseeker and Truckscout24
