Used External Thread Cutting Machine for sale (86,640)

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head Psdpfx Aex I Agpsgzerf -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Year of construction: 2000, condition: excellent (used), Thread cutting machine make ROTHENBERGER TYPE:3S-G year of construction ca.2000 Prodpjmn Thhefx Agzof Without cutting head with pipe cutter and end burr device. Runs with V230 current. In top condition, like new.

Condition: excellent (used), ROLLER THREADING MACHINE KING2 SET C R1/2-2. Threading machine, electric Prjdpfxsvgng Hs Agzjf Design: sturdy, maintenance-free gearbox with special ratio for perfect power transmission, left/right handed, with thermal overload protection and emergency stop. Self-reinforcing clamping effect by diagonal adjustment of the clamping screw. Stable torque support for torque support in both directions of rotation. Easy and quick replacement of cutting heads. Unique locking of the cutting head in the ratchet lever, guaranteeing secure seating during threading. Supplied with Central cutting heads and carrying case.

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Psdpsupbf Dofx Agzorf Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Year of construction: 1992, condition: ready for operation (used), Application range: large threads, breakage protection: from M3.0, capacity in stainless steel: up to M10, capacity in 9SMn28: up to M10, connected load: 2000W, with automatic Z-axis feed for automation. The machine is fault-free and operational, showing signs of use. With documentation and five holders. An on-site inspection is possible. Prjdpfx Aex Hfgpjgzof

Condition: good (used), Hagen & Goebel HC 22 E / Thread Cutting Machine - Speed range: 56 - 355 rpm - Table dimensions: 600x500 mm Pjdpfx Agsx Edbmezerf - Year of manufacture: 1988 Dimensions: LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and input mistakes.

Condition: good (used), Thread cutting machine with Stehler jaws, thread cutting head -Hole diameter: 190 mm -Size: 1/2 - 2 inches -Weight: 130 kg Predpfx Aob A Ncuegzjf

Condition: used, TECHNICAL DETAILS Pedpfxsx Ed A Rj Agzjrf - Part diameter : 100 [mm] - Nominal module * gear hobbing : approx. 3.0 [mm] * endless screw milling : approx. 5.0 [mm] - Max. axial movement : 320 [mm] - Cutting head orientation : -45 / + 115 [°] - Main mill max. diameter : 118 [mm] - Max. cut out length of the mail mill : 180 [mm] - Max. mill movement (Shifting) : 160 [mm] - Max. part-holder spindle speed : 3000 [t/mm] - Min./max. distance between axes : 10/100 [mm] - Cutting head motor power : 14 [kW] - Main mill speed : 50-12000 [t/mm] - Weight : 5000 [kg] EQUIPMENT - CNC Siemens 840D - Cooling tank - Chip conveyor

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material Psdpfxev T True Agzsrf - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Prjdjwk Nxqopfx Agzof Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: excellent (used), functionality: fully functional, overall weight: 785 kg, total width: 1,015 mm, total length: 1,570 mm, total height: 1,270 mm, type of input current: three-phase, input voltage: 380 V, metric thread diameter (max.): 80 mm, metric thread diameter (min.): 16 mm, thread length: 450 mm, rotational speed (min.): 14 rpm, rotational speed (max.): 94 rpm, metric thread pitch (max.): 6 mm, metric thread pitch (min.): 2 mm, HMV thread cutting machine, type OK-5 Specifications Thread cutting range (Whitworth/UNC) 5/8"- 3" Thread cutting range (BSP) 1/2"- 4" Thread cutting range (Metric) M16-M80 Number of speeds 8 Speeds, rpm 14,20,28, 32, 40, 48, 64, 94 Motor output, hp 2.7 - 4.5 Motor output, kW 2.3 - 3.0 Motor speed, rpm 700 / 1400 Spindle bore, mm 118 Spindle bore, in 4 21/32" Max cutting length without relocation, mm 450 without relocation, in 17 3/4" with relocation infinite Dimensions and weight Overall length, mm 1570 Overall width, mm 1015 Overall height, mm 1270 Prsdexz R Hujpfx Agzef Height from floor to bed, mm 830 Width of bed, mm 370 Required floor space, mm 1570 x 1015 Bed size (L x W), mm 815 x 580 Net weight, kg 785

Condition: new, Year of construction: 2025, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob Pjdpfx Agjfx U D Aezerf - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 2" inch -Drive: via 3 gearboxes Pjdob A Iwcspfx Agzorf -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: good (used), Hagen & Goebel - HG 22 EB / Thread Cutting Machine - Model HG 22 EB - Speed range: 180-1120 rpm - Table dimensions: 600x500 mm - Foot switch Dimensions: Prsdoxvig Nspfx Agzsf LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and omissions.

Condition: new, – Capacity M5–M36 – Hydraulic – Working range 2050 mm – Rotatable head – Quick-change chuck – Infinitely variable thread cutting speed – Infinitely variable return speed – Digital speed display – Includes 14 thread cutting inserts – Heavy-duty work table with T-slots – Lubrication system with manual or automatic function – Emergency stop switch Prsdpfx Asxtq Shegzjf – Documentation – 400V

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill Prjdpfx Asxf Uwxegzef - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: excellent (used), Year of construction: 1983, TOYOSK 01CC-T 36-spindle Thread cutting machine with fixed spindle and Pedpfswh Sh Nex Agzerf Manufacturer: TOYOSK Type: 01CC-T Year of manufacture: 1983 Number of spindles: 36 Three-speed gearbox: 520rpm, 850rpm, 1330rpm Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Year of construction: 1980, Vertical Internal Thread Cutting Machine Hagen & Goebel Model HG 124 N Podpfexq Tlfjx Agzorf Machine No. 4063 Year of manufacture: approx. 1980 Thread cutting capacity in steel: M3 to M12 x 1.5 Thread cutting capacity in light metal: M3 to M28 x 1.5 Throat depth: 250 mm Quill stroke: 80 mm Table size: 345 x 245 mm Spindle speed: 200 - 1000 rpm Motor power: 0.55 / 1.0 kW Power supply: 380 Volt, 50 Hz - 6 speed settings via belt change (3 speeds via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 TPI thread pitch - Table height adjustment with rack and pinion via handwheel on the round column - Spindle mounting with taper Ø 14.8 to 16 mm Required space (L x W x H): 900 x 500 x 1800 mm Weight: 260 kg

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes Pedpsb A Iyajfx Agzorf -Dimensions: 550/360/H240 mm -Weight: 55 kg

Year of construction: 1997, condition: used, thread dia. 1/16 - 2 " threading length 165 mm turning speed range 40 - 53 U/min Podpfx Aexc Nxrogzerf voltage 230 V total power requirement 1,7 kW weight of the machine ca. 50 kg - Serial-No.: 34024750 - foot switch

Condition: used, Year of construction: 2020, thread dia. bis M 24 turning speeds U/min thread M5 - M24 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm Prsdpfxsxachno Agzef table surface area 700 x 900 mm oil volume 100 l engine output 3,0 kW weight - pallet system ca. 300 kg New price approx. 4.500 euros rarely used (!!) Special price on request Equipment: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disc * smooth swivel movement thanks to built-in gas pressure dampers, among other things - mobile machine base frame * oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - stepless speed adjustment - vertical / horizontal thread cutting possible - lateral sorting of the quick-change inserts possible - connection cable with 16A plug

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes Prjdpfx Asb A Rzwegzef -Dimensions: 550/360/H240 mm -Weight: 60 kg

Condition: new, thread dia. bis M 36 turning speeds 0-100 U/min thread M5 - M36 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 5,5 kW weight - pallet system ca. 500 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 Prsdpfxexab Igo Agzjf M27 / M30 / M33 / M36

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches -Spindle bore: Ø 64 mm Psdpswub Ekefx Agzsrf -Operating voltage: 230 volts -Dimensions: 1080/700/H1140 mm -Weight: 128 kg

Condition: new, thread dia. bis M 24 turning speeds U/min thread M5 - M24 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3,0 kW weight - pallet system ca. 300 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 Prodpoxab Iasfx Agzsf