Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
thread dia. 250 mm grinding length 500 mm thread pitch - mm tread diameter 2 mm clamping length - spindle head right 900 mm spindle bore 66 mm clamping length - spindle head left 1020 mm Gun2yk workpiece weight 200 kg pitch 0,8 - 288 mm pitch angle +/- 40 ° workpiece turning speeds 0,4 - 50 U/min grinding wheel width 8/13/16/20/30 mm table feed 1500 mm/min grinding spindle speed 1900-2450 U/min no. of feed 12 max. thread profile 12,5 Modul number of starts 1 - 8 dia. of hole 160 mm grinding w... more
6
for grinding of cylindrical and tapered, left and right, single-start and multi-start internal and outernal threads of various profiles. 9hpl3gvgm more
3
With a base and a set of jaws 2, 11 gear cutting area: Pipe - 3 Whitworth - 2 Metric M 8 52 9 42 Pz Thread Length: normal 45 mm with 180 mm tensioning weight about 120 kg Qvcz0e2o more
6
Internal grinding attachment Relief-grinding Infeed-grinding Grinding length 450mm Clamping length 1080mm Thread diameter 2-250mm Thread pitch 0,3-100mm Misc. accessories tooling S3bslzzpj **MACHINE CHECKED AND TESTED FROM REISHAUER ENGINEER MARCELS MASCHINEN CH more
6
thread dia. max 200 mm threading length 450 mm thread pitch 0,3 - 80 mm pitch angle 25 ° clamping length 700 mm grinding wheel diam. min/max. 275 - 350 mm Schleifscheibendrehzahlen beim Schleifen 1850 U/min work piece spindle speed 1 - 48 U/min return speed 500 mm/min max. module 10 grinding wheel width 3,5 - 40 mm electrics - voltage/frequency 380 / 50 V/Hz total power requirement 7,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,6 x 1,8 x 1,6 m universal Thread-Worm Gr... more
5
Speed range: 275-1785 rpm, table size: 350 x 280 mm, thread cutting capacity: steel R50 M12, spindle stroke: 60 mm, spindle retainer: CM 2, total power: 1.1 kW, Masch. Weight: 140 kg, overall dimensions (L x W x H): 0.6 x 0.7 x 1.7 m, State: very well columns Ø 98 mm, guide cartridge pitch 1.25 modes built-in,: 1. test operation with push-buttons, 2. manual operation, control by means of manual sensor reverse lever, rbeitsgang 3 individual 4. Zeitgeregelter operation, 5. continuous operation, a... more
6
workpiece diameter 2 - 250 / 320 mm 80mpc90mz threading length 1150 mm thread pitch 0,8 - 300 mm Control Reishauer grinding length 1150 mm clamping length max. 1530 mm module 0,5 - 12 pivoting angle +/- 50 ° relief of the tap 10 mm Bore 66 mm cutting speed 45 m/s workpiece weight 250 kg electrics - voltage/frequency 380 / 50 V/Hz total power requirement 34 kVA weight of the machine ca. 8 t dimensions of the machine ca. 0 m more
6
thread dia. max 200 mm threading length 450 mm thread pitch we0,3 - 80 mm pitch angle 25 ° clamping length 700 mm grinding wheel diam. min/max. 275 - 350 mm Schleifscheibendrehzahlen beim Schleifen 1850 U/min work piece spindle speed 1 - 48 U/min return speed 500 mm/min Pszzze max. module 10 grinding wheel width 3,5 - 40 mm electrics - voltage/frequency 380 / 50 V/Hz electr. connected load 15 kVA weight 5600 kg space required 2.2 x 2.1 x 2.0 mm Including: Change Gears Dressing Device Grindi... more
6
thread dia. 390 mm grinding length 4130 mm thread pitch 150 mm total power requirement 25 kW weight of the machine ca. 22 t dimensions of the machine ca. m Dsgltyh more
5
Lindner GU S thread / worm grinder Ausf. Size L, B, no. 3379, BJ. approximately 1966, grinding spindle bearing was overhauled / rebuilt Operating hours: unknown Max.Werkstueckdurchmesser: Maximum clamping length: 750 mm Max grinding diameter: 100 mm Max grinding length: 750 mm 98inxtr3w Accessories: Various grinding wheel flanges Is still in use and can be seen under power more


Thread gri...
every day

New machines via email!

Be informed!
4
Thread grinding machine MATRIX 350X5000 - max.dia of job- 350 mm - length between centers-5000mm - spindle bore dia.:190mm B2yz3s0qk For more information please contact us. more
6
thread dia. 250 mm grinding length 450 mm thread pitch 0.3 mm min - 100 mm max mm clamping length 870 mm tread diameter 2,0 mm weight 4700 kg workpiece spindle - bore 45 mm total power requirement 10 kW TECHNICAL DETAILS grinding length : 450 [mm] 2sf82efyb distance between centers : 870 [mm] diameter of the part mini (grinding wheel simple - multiple)/maxi : 2-4/250 [mm] max part weight : 50 [kg] max. orientation angle : 40 [°] grinding wheel mini/maxi : 275/350 [mm] ceramic/organic grindi... more
2
thread dia. 390 mm grinding length 4100 mm thread pitch 150 mm total power requirement 40 kW weight of the machine ca. 22 t dimensions of the machine ca. m H9ieehqzw more
2
Thread grinding machine MITSUI-EX-CELL-O 300X2000 - max.dia of job- 300 mm - length between centers-2000mm 7e33ct8zu For more information please contact us. more
5
workpiece diameter 200 mm threading length 450 mm thread pitch 80 mm total power requirement 15 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m Baowkg8d7j more
4
Thread grinding machine MITSUI-EX-CELL-O 300X3000 - max.dia of job- 300 mm - length between centers-3000mm 7e38yorn7 with chip conveyor and hydraulik installation For more information please contact us. more
1
Thread grinding machine MITSUI-EX-CELL-O 300X1000 Mttgsc - max.dia of job- 300 mm - length between centers-1000mm For more information please contact us. more
4
Thread grinding machine S7450 500X5000 7e3tob2ux Made in China - max.dia of job- 500 mm - length between centers-5000mm For more information please contact us. more


Thread gri...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close