Used Spring End Grinding Machine for sale (96,483)

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D30L/7913, Offer Number: D30L/7913 Machinetype: spring end grinding machine Make: WAFIOS Type: FEL3 Constr. year: 1980 wire diameter: 2-10 mm spring diameter: 120 mm Gtsdswi Szrepfx Aabot legth of springs: 10 - 240 mm Location: In our warehouse

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 1,020 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm Gjdpfx Aaoid Iymsbstt With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 360 mm, total length: 820 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted Gtedpfxsxwp A Hj Aabot • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: good (used), Cup grinding machine, swivel arm grinding machine, carbide chip breaker groove grinding machine, tool grinding machine, grinding machine, angle grinding machine, turning tool grinding machine -Clamping table: 440 x 300 mm -Max. intermediate dimension: 130 mm -Grinding disc diameter: 125 mm -Dimensions: 1200/840/H1680 mm Gedpfxecvnaie Aabott -Weight: 380 kg

Year of construction: 1960, condition: not inspected (used), Tungsten carbide chip flute grinding machine of the company Wendt type SS 50 Gtsdshaqxbepfx Aabot

Condition: as good as new (ex-display), Year of construction: 2021, Because of CANCELLED PROJECT of the construction of a nuclear power plant, we are able to offer you.... Gtsdpevlimlofx Aabot NEVER USED - complete metal forming / processing plant (about 80 machines) Please contact us for full machinery list and more photos. Thank you!

Condition: used, Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine -Elysier grinding possible with the machine -Diamond grinding wheel -1x angle tables: 220 x 310 mm Gtodpfx Ajdz U Tljabst -Angle adjustment: +15° bis -5° -Oscillation: 0-35 mm -Water cooling with: electrolytes -Sanding dust extraction -Max. Steels cross section: mm -Number: 1x grinding machines available -Price: per piece -Dimensions: 850/700/H1400 mm -Weight: 580 kg

Condition: used, Year of construction: 2000, centre distance 1000 mm grinding length 1000 mm centre height 300 mm Control Siemens 840 800 kg weight of the machine ca. 6,7 t The machine is being sold as defective / for parts! Gtsdpfx Ajvy Im Hjabet Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm Godpfx Asirfpgjabstt MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Gedpfsxx Uudsx Aabjtt Inspection and trial run possible by appointment. Please contact us for more information.

Condition: excellent (used), Year of construction: 2016, XYZ 1020 Surface Grinding Machine Mag’ Chuck 250 x 500mm Spindle Speeds 3000rpm Spindle Motor 2Hp Standard Grinding Wheel Dia. 180mm Standard Wheel Bore 31.75mm Gtjdpfex S Ru Asx Aabst Max. Longitudinal Grinding Travel- 500mm Max. Cross Grinding Travel - 250mm Max. Distance from Table Surface to Spindle Centre - 500mm Max. Longitudinal Travel – 558mm Longitudinal Travel Speed Range 5-25m/min Cross Travel Increments 0.15 – 15mm Cross Feed per Handwheel Revolution 4mm Cross Feed per Handwheel Graduation – 0.02mm Down Feed Per Handwheel Revolution 2mm Down Feed Per Handwheel Graduation 0.01mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79111 Machine Serial Number: 1624045 Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1988, operating hours: 1,000 h, functionality: limited functionality, machine/vehicle number: 99223, overall weight: 2,800 kg, Grinding Dia: min=0.8 to max 250 mm; Vertical stoke : 90 mm; Max. travel of the grinding head :300 mm Table size :320x600 mm; Max stroke of the table Tranversal 250 mm, Longitudinal 400 mm; Electric motor speed 80000 rpm, Pneumatic 180000 rpm. Dimensions 1585x1260x2665 mm, Weight: 2800 kg Gtjdpfx Aasxvccdobot

Condition: new, Year of construction: 2025, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: Gtjdpfx Asq Nf Uweabjt 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Year of construction: 1995, condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available. Gedpfx Ajvripmjabett

Condition: ready for operation (used), Asahi - Seiki Manufacturing Co. Ltd. NSF-10 for producing extension / extended springs with english or german loops for wire diameters up to 1mm. Machine in very good condition, possible to buy with decoiler and setted for some springs. Gedpfsr Izikjx Aabjtt

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Gedpfx Asxiv Ugeabott Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E Gtsdpfx Aastr Azkjbot On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available The roundness within 0.001

Condition: good (used), Year of construction: 2013, TOYODA (JTEKT) GL32M-63 CNC UNIVERSAL CYLINDRICAL GRINDER Equipped with: CBN Grinding Wheel Flagging Steady Rest Workhead Mounted Rotary Dresser Marposs P3SE System Monitoring Toyoda In Process Gaging Marposs E20N Acoustic Controller Air Gap Eliminator Workpiece Collision Control Coolant Pumps W/Magnetic Separator Pendant Control RH Workhead with Center LH Workhead with Center Work Rests Worklight Light Curtains Stacklight Extra Wheels Specifications: -Grind Center to Floor: 1,000 mm -Swing Over Table: 320 mm -Distance Between Centers: 630 mm -Grinding Diameter Range: 10 - 150 mm -Floor Space (Base machine w/auxiliary equipment): 3,400 x 5,000 mm -Net Machine Mass (approx.): 10,500 kg Grinding Wheel: -Type: CBN Wheel -Wheel Size (OD): 350 mm -Maximum Wheel Width: 60 mm -Surface Speed: 120 m/s Wheelhead: -Spindle Bearing: TOYODA STAT Bearing -Slide: V and Flat -Feed System: Ballscrew -Rapid Feed (on diameter): 30 m/min -Minimum Incsrement (on diameter): 0.0001 mm Workhead: -Type: Dead Spindle -Work Speed (Max): 500 rpm -Center Taper: MT #4 Footstock: -Type: Hydraulic -Taper Compensation: Manual -Maximum Center Retraction: 60 mm -Center Taper: MT #4 Motors: -Wheel Drive Motor: 15 kW, Belt-Drive -Wheelhead Feed Servomotor: 1.3 kW Tank Capacities: -Wheel Spindle Lubrication Oil: 80 L -Hydraulic/Lubrication Oil: 20 L Gtedportrzpjfx Aabet

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm Gtedexh Rqtjpfx Aabet with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: excellent (used), Year of construction: 1982, Model D.I. + M.I.A Max width of wheel 250mm/10" Gtedpfxew Svrro Aabjt Min width of wheel 30mm / 1 1/4" Wheel diameter 508mm Horsepower 30 HP Weight 5900kg Year 1982 Manuals & electrical diagrams included

Condition: good (used), Year of construction: 2011, LANDIS LT-2 TWIN WHEEL CNC ORBITAL CRANK GRINDER Equipped with: Landis 6400 CNC Control Siemens TOUCH HMI Arobetech Steady Rest Marposs P7 Gage System Lateral Locator Twin CBN Grinding Wheels Rotary Dresser Headstock Tailstock Rittal AC Units Specifications: Gedpertrxxjfx Aabstt Maximum Center Distance: 680 mm

Condition: good (used), Year of construction: 1990, Lumsden 92ML Rotary Surface Grinder 48" Magnetic Chuck Year 1990 - Latest ones made Segmental wheel diameter - 711mm / 28" Segments per set - 12 Table diameter and grinding capacity - 1219mm / 48" Max height of wheel to table - 572mm / 22.5" Min height of wheel to table - 114mm / 4.5" Max height of wheel to magnetic table - 457mm / 18" Spindle speed 550rpm Table speeds - 18 & 6 rpm Automatic feed 10 rates - 0.1 - 1.0mm/min (0.004 - 0.040 ins/min) Power elevation - 635mm/min (25ins/min) Spindle motor - 50-75hp at 960rpm Table motor - 6 /.5hp at 1440/480rpm Feed motor - 0.25hp at 1440rpm Elevation motor - 1hp at 720rpm Coolant pump motor - 1hp at 1440rpm Overall height of machine - 3048mm Floor space 4394 x 3353mm Weight approx 12,200kgs / 12ton Gjdevwc I Hepfx Aabjtt

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min Gedpfsrtryyjx Aabjtt

Condition: excellent (used), Jones & Shipman 624 Dominator CNC Surface Grinder Godpfx Aju D H Uhoabett Under power and working. Can be shown demonstrating at our premises in Burscough Fanuc Series 210i-M CNC Control Table Length 600mm x 200mm width Wheel diameter 250mm Wheel width 25mm Max wheel speed 3200rpm Spindle power 5.6kw

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Gtjdpfertr D Iox Aabjt Work Capacity (Approx) Rotary: 20 -200 Dia. In.