Used Taps for sale (981)

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 171648, turning diameter: 380 mm, spindle bore: 88 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,850 mm, total length: 4,200 mm, total width: 2,000 mm, overall weight: 5,600 kg, bar passage: 77 mm, spindle nose: A2-8, center height: 1,020 mm, quill mount: MK 5, Equipment: documentation/manual, MAZAK QUICK TURN NEXUS 250 MY CNC lathe - Chuck size: 10 inches - Max. swing diameter: 675 mm - Standard turning diameter: 276 mm - Max. turning diameter: 380 mm - Distance between spindle nose and turret face: 115 - 690 mm - Load capacity including chuck: 400 KGF (chuck work), 700 KGF (bar work) - Acceleration and deceleration time: 2.3 sec - Travel range of tailstock: 550 mm - Max. thrust: 700 KGF - Number of tools (milling cutters): 12 - Tool size: max. external turning tool: 25 x 25 mm, internal turning tool diameter: 40 mm, milling drill diameter: 20 mm, milling tap: M12, shank milling cutter: 20 mm - Switching time to next/opposite position: 0.2/0.6 sec - Milling spindle speed: 25 to 4500 rpm - Rapid traverse C-axis: 40 rpm - For further technical data, see the photographed data sheet - With technical documentation - Transport height: approx. 1850 mm Dwsdpfx Asz Nv H Ueb Noc Note: without bar feeder, includes the collets and tool holders shown in the pictures - some are powered. Important note: the workbench possibly shown in the pictures is not included in the scope of delivery! FCA D-01445 Radebeul - loaded onto a truck

Condition: used, Year of construction: 2002, functionality: fully functional, Tapping Machine HAGEN & GOEBEL type HG-6 Year of construction: 2002 Spindle travel: 50 mm External spindle cone: B12 Rotation: from 355 to 1800 RPM Rotation right / left Djdpfxoz Nxxye Ab Nswc Throat depth: 120 mm BILZ Quick Attach Voltage: 380 V Width: 400 mm Depth: 600 mm Total height: 800 mm Weight: approx 100 kg

Condition: good (used), functionality: fully functional, 1 x Drilling and threading machine WMW Heckert Mikromat Well-maintained machine with complete accessories + coolant pump Technical data: Spindle speeds: 90 - 710 rpm (7 steps) Thread sizes: M6 - M30 Dwsdpfozzz E Isx Ab Nec Pitches: 1.0 - 3.5 mm The machine can be inspected while powered on.

Condition: excellent (used), Cutting range: M3-M10 in steel M3-M16 in cast iron M3-M18 in light metal and brass Dwsdpfx Abjz Hk Rue Njc Spindle speeds: 120-240-180-360-300-600 rpm Includes 1 new tap chuck Everything works smoothly and well.

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,900 W, overall weight: 6,550 kg, controller manufacturer: SIEMENS, controller model: 828D, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2020. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a powerful spindle speed range of 20–4,000 rpm and a robust turret with 12 tool stations. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Controlled axes: X, Z, Y, B, C1, C2 • Slant bed: 30°Travels and rapid traverse • B-axis (sub-spindle) travel: 830 mm • C1-axis: ±360° • C2-axis: ±360° • Rapid traverse (X / Z / Y / B): 30 / 30 / 10 / 30 m/minMain spindle • Spindle nose: ASA A2-8 • Hydraulic chuck: 254 mm, 3-jaw • Max. torque: 730 Nm • Spindle bore: 91 mm • Drawtube ID: 82 mm • Integrated built-in spindle motor • C1 positioning resolution: 0.001°Sub-spindle • Spindle nose: ASA A2-5 • Hydraulic chuck: 170 mm, 3-jaw • Speed range: 60–6,000 rpm • Motor power: 18.2 kW • Max. torque: 220 Nm • Spindle bore: 62 mm • Drawtube ID: 50 mm • Built-in motor • C2 positioning resolution: 0.001° • Part ejector stroke: 120 mmMachining capacity • Max. swing over bed: 780 mm • Max. swing at front door: 680 mm • Max. swing over carriage: 630 mm • Max. turning diameter: 376 mm • Max. turning length between centers: 760 mm • Max. bar capacity, main spindle: 81 mm • Max. bar capacity, sub-spindle: 49 mm • Off-center milling capacity (Y-axis): 105 mm (±52.5 mm) • Max. cantilever workpiece weight: 260 kg • Max. workpiece weight using sub-spindle: 520 kgTurret and driven tools • Turret type: BMT-65 • Turret indexing positions: 24 • Tool stations: 12 (all 12 driven) • Indexing time: 0.15 / 0.65 sec • Turning tool size: 25 × 25 mm • Boring tool capacity: Ø50 mm / Ø32 mm • Driven-tool speed: 50–5,000 rpm • Driven-tool power: 4.1 / 7.79 kW • Max. driven-tool torque: 79.8 Nm Dwsdsz N Dhtepfx Ab Njc • ER-32 capacity: Ø3–20 mm • Rigid tapping: Yes Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, functionality: fully functional, Used TAPER TAP MACHINE, FAMUP (SERRMAC) MDR16. TAPER TAP MACHINE, SERRMAC WITH PEDESTAL COOLING SYSTEM AND TANK, USED. Dwodpfx Abjzht Izs Noc

Condition: excellent (used), Year of construction: 1984, TOYOSK 01C550T Fixed Spindle Pitch 48 Spindle Tapping Machine Year of Manufacture: 1984 Speed ​​(3 stages): 450 / 700 / 1100 rpm Speed ​​Change: Mechanical (stepped stages) Spindles: 48pcs Dsdpewifdgjfx Ab Nowc Tool Holder Type: Spring/Clamp Chucks Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Year of construction: 2007, condition: like new (used), functionality: fully functional, Tape Machine Has been a part of an Elumatic production line and purchased directly from Elumatic. Manufacturer: Ruscher Model: RU-FE Year: 2007 Information Tape-applying machine with roller conveyors, total length 11 meters. Suitable for facade profiles and many other types of profiles that need to be coated with protective film tape. Dimensions Length: 11,000 mm Width: 800 mm Height: 1,400 mm Seller’s Comments Fully functional Used in a production line for aluminum profiles Can be separated for transport Dwodpfx Abjxyyc Aj Nsc

Condition: excellent (used), Year of construction: 1982, TOYOSK 01B-T fixed spindle 12-spindle drilling machine Dwsdpfswh S E Usx Ab Nsc Year of manufacture: 1982 Speed ​​(3 stages): 440 / 700 / 990 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs Tool holder type: spring/clamp chucks Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Thread milling machine (?) possibly also suitable for other applications Stock number: 3138 Manufacturer: Maschinenfabrik Ortlieb Esslingen Bed length: 400 mm Tailstock center height: 140 mm Cross slide travel: 220 mm Grinding wheels: 75 x 20 x 20 mm cup wheel Motor speed: 2,775 rpm, 0.175 kW Spindle motor: 0.16 hp (0.1 kW), 1,400 rpm Accessories/Equipment: 3-jaw chuck, various cam followers Condition: good Total weight: 230 kg Dodoz Ef Rgopfx Ab Nowc Dimensions: 750 x 500 x 1,400 mm

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Djdpfx Ajwifd Hob Njwc Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Year of construction: 2001, functionality: fully functional, double-head cutter with pre-scoring, chipping, 4 milling cutters, and edge finishing belt for both the right and left sides. Dwjdjy U Inxjpfx Ab Nsc Maximum working width: 2500 mm.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 330 mm, table load: 250 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 21, tool weight: 2,000 g, number of axes: 3, This 3-axis HAAS DC-1 was manufactured in 2024. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 330 mm. The machine includes a robust table size of 700 x 420 mm and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the HAAS DC-1 vertical machining centre we have for sale. Contact us for further details. Dodjz Nytfopfx Ab Nowc • Working hours: 0 (showroom machine) • Spindle nose to table: max 18.9 in / 480 mm; min 5.9 in / 150 mm • Spindle: max torque 14.0 ft-lbf @ 2500 rpm / 19.0 Nm @ 2500 rpm; inline direct-drive; taper BT30; grease-packed bearings; liquid-cooled • Table: 27.6 in / 700 mm (L) x 16.5 in / 420 mm (W); T-slot width 0.550 in / 14 mm; T-slot center distance 4.92 in / 125 mm; 3 T-slots; max load 550 lb / 250 kg (evenly distributed) • Feedrates: max cutting 1200 ipm / 30.5 m/min; rapid (X/Y/Z) 1890 ipm / 48.0 m/min • Max thrust (X/Y/Z): 2054 lbf / 9137 N • Tool changer: turret; capacity 21; max tool dia (full) 2.4 in / 60 mm; max tool dia (adjacent empty) 3.1 in / 80 mm; max tool length 7.90 in / 200 mm; tool-to-tool 1.50 s; chip-to-chip 2.50 s • Max tapping speed: 5000 rpm • Coolant capacity: 40 gal / 151 L • Air: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar; inline air hose 3/8 in; air coupler 3/8 in; min pressure 80 psi / 5.5 bar • Power: 3-phase 220 VAC (FLA 40 A) or 440 VAC (FLA 20 A) • Shipping: 100.0 in x 79.0 in x 100.0 in / 254 cm x 201 cm x 254 cm; weight 7040 lb / 3402.0 kg Additional equipment • CW-5200 industrial chiller • Chip conveyor Technical Specification Taper Size BT 30

Condition: used, Second-hand Schleicher ‘Perfect’ frame stapler for producing mitre joints in picture, mirror or furniture frames that can bear weight immediately. Technical data: - Smallest frame: 60 x 60 mm - Drive: Pneumatic Djdpfx Asz Iluweb Nswc

Condition: used, Closes bags with a strip of tape around the neck The SBS FlexSeal closes bags, for example of bread, vegetables or fruit, by applying a strip of tape around the twisted neck. You hold the bag against the brushes, which draw in and twist the neck; the machine then wraps a piece of tape around it and cuts it off automatically. It is operated from an Allen-Bradley touchscreen and stands on a base with castors. We did not find a rating plate with the year of manufacture. Dwodpfx Asz Nc Nzeb Nec Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Bag closer with tape Infeed: Two brushes that draw in and twist the bag neck Controls: Allen-Bradley touchscreen Construction: Stainless steel, on castors

Condition: used, Technical specifications Weight: 42 kg Dimensions: 920 × 750 × 1350 mm Clear working height: 1000 mm Leg length: 920 mm Dsdpfjz I R S Ujx Ab Newc Magazine capacity: 300 pieces Max. pressure: 7 Clamping leg length: 15–22 mm

Condition: ready for operation (used), Year of construction: 2012, Wiemers AT 12 II Air Tapping Pneumatic Tapping Arm Thread Cutter Year of manufacture: 2012 Operating pressure: 6 – 7 bar Air consumption: approx. 750 l/min Dwsdpfxoymkrvs Ab Noc Thread size: M3 – M12 Description has been adopted as provided. You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop to see our full range of offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Please note that deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm Djdpfxjrt Unwj Ab Nowc - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Condition: excellent (used), functionality: fully functional, 1 x Thread-drilling machine Steinel BT 6.52 with coolant system Dodpfezk Iyqjx Ab Newc + small vise Technical specifications: Max. thread size: M 6 (further technical specifications see photos) The machine can be inspected while powered on.

Condition: good (used), functionality: fully functional, 1 x Thread drilling machine WMW Dwodpfx Aezk I Aleb Njc GI4/1 with coolant system The machine can be inspected while it is powered on.

Condition: used, Radial Drilling Machine GSP type 49S22 Spindle: Ø 125 mm Cone: CM6 Dwsdpfx Aez Nxnhob Noc Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1731 067, Equipment: CE marking, onboard computer, For sale is a tape gluing machine from Herbert Meyer GmbH. Working width: 1800 mm, can operate in continuous mode. The machine is from 2013 and is in good technical condition – ready for operation. I can provide more information via email. Power: 32.2 kW Supply voltage: 400 V Dwjdjzfi Hbepfx Ab Nec Supply current: 47.5 A Air supply: 6 bar Fusing machine with a particularly efficient heating zone and precise pressure of the pressure rollers for even pressure. Energy savings and clean operation guaranteed.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar Dsdpfxswmnhps Ab Newc - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: excellent (used), Twist drills and taps grinder from 1,5 to 25 mm CUOGHI model APE 25 Dwjdpfx Aoyzpf Ssb Nsc

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 4760025, MACHINE DESCRIPTION Dwodpfx Aoznkz Sjb Njc Special drive concept Multi-axis Profiroll CNC/AC control Two-slide design Graphical user interface Process visualization Data management Operator guidance Integrated workpiece handling The PRI 120 CNC/AC is a newly developed internal gear back-rolling machine for rolling back angles onto the tooth flanks of existing internal gears. The innovative machine concept is based on over 60 years of experience in the development and manufacture of thread, profile, and gear rolling machines in Bad Düben. The machine’s base frame is a ribbed, torsionally rigid machine bed made of cast iron, which minimizes vibrations. In particular, the use of state-of-the-art proportional valve technology in conjunction with the PROFIROLL CNC control enables optimal process control of the rolling process. The control system, in combination with the backlash-free roller guide system, guarantees the highest precision and repeatability in the positioning of the rolling slide and, thus, of the tool. The innovative handling system, in conjunction with the rolling process, allows for the shortest cycle times. TECHNICAL DATA / PARAMETERS Workpiece diameter min./max. (mm) = 60/120 Workpiece width, min./max. = 10/40 Tool mounting length (mm) = 50 Connection value (kW/A) = 16/63 Width (mm) = 3600 Depth (mm) = 3600 Height (mm) = 2680 Weight (kg) = 5700