Used Gertus Taps for sale (836)

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Gedpfx Agsw Syyyo Toil

Condition: good (used), Tap for blind hole drilling -various: diameters -Type: HSS Gjdjb A R I Sopfx Ag Teil -Quantity: 7 pieces -Drill bits: M38 x 1.5/M35 x 1.5 2 pieces/M32 x 1.5/M30 x 1.5 3 pieces -Sale: only complete set -Weight: 4 kg

Condition: ready for operation (used), functionality: fully functional, Electric index tab punching machine with automatic positioning for A5 or A4 formats, 2 - 31 tabs, capacity up to 25 sheets. Gjdpfjx Hh N Tsx Ag Teil The Onglematic 7 features a built-in, 90° inner round blade. With the Onglematic 7 index tab punch, both loose sheets and bound documents can be processed. Automatic punching is triggered by foot switch activation. Automatic or manual feed after each punch, as well as automatic paper clamping.

Condition: used, Taps Pre and finish taps Gededk Rgxspfx Ag Toil R 1 3/4 inch

Year of construction: 1985, condition: used, Extraction machine for taps Gedei Huvhopfx Ag Tsil -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: used, Taps for pipe thread Gsdpfedk Rdvex Ag Tjil Before and finished Schneider R 2 3/4 inch

Condition: used, 2 taps Before and finished Schneider R 2 1/4 inches Weight 4 kg Gisdedk Rgrjpfx Ag Tol

Condition: good (used), Withworth tap Make Reishauer Whithworth 1 1/2 inch 601 D Rapid Gjdedx Ug Ejpfx Ag Toil

Condition: like new (used), Tap make ReishauerTyp 1 1/8 GG Gedpfx Aedx Ug Asg Tsil

Condition: good (used), Tap Reishauer 1 1/2 GGL length 120 mm Godpjdx Uzlefx Ag Toil

Condition: good (used), Trapezoidal taps Diameter 40 mm Pitch 1/5 inch Gedpfsdx Uy Iex Ag Toil

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Godpfxjnvdtcj Ag Tsil Technical data: Steel - stainless steel - aluminum - plastic ,machining deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable length of guide bar 500 mm working height 750 mm speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 500 x D 400 x H 8500 mm Weight approx. 30 kg

Condition: like new (used), Year of construction: 1991, machine/vehicle number: 176063, Plasma cutting machine CORTA PS 3100 Year of construction 1991/retrofit, machine number: 176063 Cutting area: 4000 x 2000 mm Alternating operation of 2 cutting processes: 1x plasma cutting unit Stak Pak ll, 105 Ampere 1x oxyfuel cutting torch MG 12 SE 30 CPS control unit DNC connection Graphic base version Trajectory: 6000 mm Gjdjvfmiwepfx Ag Tjil 1 torch suspension MG 200 K arc-dependent scanning 1 plasma interlock Portal carriage, cross carriage Torch suspension MG 200 K Cutting table 4200 x 2100 x 700 mm Modular, technically advanced Stak Pak II plasma cutting system, 105 amps 1 control module CM 6032 3 power modules PM 6042 1 PCM 35 torch, 15 m 1 PCM 140 torch, 15 m 1 cooling module ex works

Condition: ready for operation (used), Year of construction: 2001, JOHNFORD VTC 880 TWIN PALLET CNC VERTICAL LATHE MAKE JOHNFORD, MADE IN TAIWAN MODEL VTC 880 + APC + ATC YEAR 2001 CONTROL FANUC 18 T MAX SWING DIA 1,000 mm MAX CUTTING DIA 900.0 mm STANDARD CUTTING DIA 800.0 mm MAX CUTTING HEIGHT 800.0 mm TRAVERSES X AXIS 50.0 mm to 810.0 mm Z AXIS 880.0 mm SPINDLE SPEEDS 10 to 800 RPM SPINDLE BEARING DIA 330.0 mm SPINDLE NOSE A2 - 11 SPINDLE MOTOR 18.5 / 22 kW TURRET TYPE AUTOMATIC TOOL CHANGER NO OF TYPES 2 X 12 ATC TOOLS SHANK SIZE BT 50 AND CAPTO PLUS FULL C AXIS MILLING TAPPING Gsdpfxsukuprj Ag Tsil X, Z, C, A AND B AXES HIGH PRESSURE COOLANT PAPER COOLANT FILTRATION SWARF CONVEYOR FULLY OPERATIONAL FULL SET OF MANUALS GOOD RANGE OF TOOLING

Condition: ready for operation (used), Year of construction: 2006, operating hours: 7,647 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,500 W, tool weight: 10,000 g, number of axes: 5, This 5-axis HEDELIUS T8 - 2300 was manufactured in 2006, featuring a robust vertical machining center design. It boasts a large travel range of 2300/800/850 mm and a high spindle speed up to 12,000 rpm. The machine includes a B-axis NC swivel head, a 40-position tool magazine, and supports a maximum workpiece weight of 2500 kg. Consider the opportunity to buy this HEDELIUS T8 - 2300 vertical machining center. Contact us for more information. • NC swivel head B-axis: +92° / -92° • Max pendulum operation: 2 × 850 mm • Rapid traverse: 60 m/min • Feed force: X/Y 5000 N, Z 9000 N • Spindle: • Max torque: 158 Nm Gsdpfxjx E Ebws Ag Tjil • Front spindle bearing diameter: 70 mm • Tool clamping (pull-in force): 12 kN • Tool magazine/changing: • Tool positions (standard): 40 • Tool positions (Magnum): 80 • Max tool diameter: 125 mm (180 mm with adjacent positions empty) • Max tool length: 330 mm • Tool change time (approx.): 3.5 s • Chip-to-chip time: vertical 6.0 s / horizontal 6.5 s • Table/capacity: • Fixed table (L×W): 2000 × 920 mm • T-slots: 6 × 18 H12 • Rotary table: 1 × 18 H8 • Max. workpiece weight: 2500 kg • Machining capacities: • Drilling in St 52 with carbide: 40 mm • Tapping: M24 • Milling in St 52: 500 cm³/min • Distances (reference): • Z travel vertical (L2): 850 mm • Spindle nose to swivel axis (L3): 300 mm • Spindle nose to table surface (L4): 40 mm • Z travel horizontal (L5): 1000 mm • Spindle axis to table surface (L6): 210 mm • Y travel (L7): 800 mm • Table center to travel start/end (L8/L9): 400 / 400 mm • Power/weights: • Total connected load: 25 kVA • Machine weight (standard): approx. 17,000–17,500 kg • Hours: • Operating hours: 21,100 h • Spindle hours: 7,647 h Additional equipment • Chip conveyor • Internal coolant through spindle, 40 bar • Paper belt filter • Oil and emulsion mist separator • Rotating viewing windows (2) • Cleaning guns (2) • Renishaw touch probe Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control system: Mazatrol 640 MT Pro Travel distances: X-axis = 630 mm Y-axis = ±230 mm Z-axis = 1,585 mm B-axis = 225° X2-axis = 230 mm Z2-axis = 1,530 mm Rapid traverse speed of the axes: X-axis = 38 m/min Y-axis = 26 m/min Z-axis = 38 m/min C-axis (spindle rotation): 400 rpm MAIN SPINDLE Drive power: 30 kW Max. torque: 1,200 Nm Speed range: 35 to 3,300 rpm COUNTER SPINDLE Drive power: 26 kW Max. torque: 500 Nm Godpfsxy Nzusx Ag Teil Speed range: 35 to 4,000 rpm MILLING SPINDLE Drive power: 18.5 kW Max. torque: 120 Nm Speed range: 15 to 12,000 rpm Max. turning diameter: 760 mm Max. turning length: 1,500 mm Tool magazine: 80 stations (Capto C6) Coolant/chip removal: - Oil mist extraction - Hinged belt chip conveyor - High-pressure package 70 bar - 7 pressure levels PLC - Dual change filter and oil skimmer Linear scale system for X/Y-axis MACHINE OPTIONS - Synchronous counter-rotation of turning and milling spindle - C-axis 0.0001 degree (counter spindle) - Overload monitoring system for the spindle and axis feed system - Automatic ON/OFF with warm-up function WORKPIECE HANDLING SYSTEM: - Gantry loader GL 200 F (1,500 U) - Hand type D3 (clamp jaws types A, B, C, D, E) - Maximum workpiece weight 2 x 20 kg - Shuttle loop type II (belt conveyor) - 12 pallets 750 x 440 mm - Safety fence - Automatic chuck open/close - Air blast device at the chuck CONTROL OPTIONS - Cylindrical interpolation - Interface set - Option package for 5-axis simultaneous machining - Synchronous tapping, MAZACC2D, - EIA/ISO, tool length compensation - Fully programmable B-axis 0.0001° - Software for 5-axis simultaneous mode - For main and sub spindle 3-jaw quick-change power chuck Ø 315 mm Type: SMW KNCSN315 91 The machine can be inspected under power at any time.

Condition: good (used), functionality: fully functional, Double-deck screening plant Screening surface: 5,000 x 1,800 mm Godpfx Aetpgv Ieg Teil with tapping device for fine screening mounted on base frame

Condition: excellent (used), Year of construction: 2004, drilling capacity: 32 mm, column diameter: 200 mm, Heidenhain RADIAL ND 1200 R ; HeidenHain scales HeidenHain measuring probe for: Rectangle target pattern Frame target pattern Circle target pattern  Line target pattern Arm Length: 1000mm Max. drill Ø cast: 32mm Max. tap Ø: 30M Stroke pinole: 240mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Godpfx Asx S H Nveg Toil Floor / table area: 1370 x 700mm Speeds / ranges: 1220Rpm Spindle Taper: 4ISO/Bt/Mk Throat: 1000mm Column sleeve: 200mm Quill Ø: 50mm Length: 1400mm Width: 720mm Height: 1900mm Weight: 1200kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 weight of the machine ca. 6,5 t dimensions of the machine ca. 7400 x 2100 mm Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Giedex S Ehdspfx Ag Tel Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: used, Year of construction: 1988, Material: 316 L stainless steel Tank pressure: 50 psi / approx. 3.5 bar Double jacket pressure: 90 psi / approx. 6 bar Temperature: 300°C Heat source: external (not supplied) Diameter: 600 mm / Depth: 600 mm Hinged lid Gedpfjx Rz Tmjx Ag Tsil 3 clamp connections diameter 50 mm 1 temperature tap Total opening / closing 8 clips Total draining Year : 1988 Mobile unit : 4 wheels

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Giedpfx Aog N Nl Iog Tol Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Substructure 900 x 600 x 875 mm

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Giedpfxex Sx D Sj Ag Tsl Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Length: 2900mm Width: 1200mm Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, bore capacity in steel (diameter) 60 mm Giedpfxst U Scwo Ag Tel bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 2,7 x 0,7 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: new, bore capacity in steel (diameter) 30 mm throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch Gsdpfxjun Um Ej Ag Teil * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head Godpfx Aeg N Nl Dsg Toil - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm