Used Internal Gauge for sale (11,769)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, This machine is to carry out an alignment layer treatment of LCD glass substrate by a rotating roller. The roller and stage are flexible to change the setting of angle depending on the coditions used. Gedpfxewli Eye Ah Esbw

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,184 h, functionality: fully functional, machine/vehicle number: 2407-463, spindle speed (max.): 60,000 rpm, number of spindles: 3, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 15 °, TECHNICAL DETAILS Gbjdpfxjxtdfbj Ah Eew Grinding spindle speeds Spindle 1: 60,000 rpm Spindle 2: 60,000 rpm Spindle 3: 45,000 rpm B-axis swivel range: -90°/+15° MACHINE DETAILS Spindle hours Spindle 1: 11,278 h Spindle 2: 2,184 h Spindle 3: 2,841 h Main counter: 45,144 h EQUIPMENT Touch probe (on 4th spindle position)

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Gbjdpfortryysx Ah Eow Rapid Feed/Speed X/Z: 90/30 m/min

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Gbjdpfjxvqkijx Ah Eew Dimensions: 2,150mm tan to tan x 1,600mm diameter

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Gedpfjxwdxijx Ah Esbw Two machines are available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Gbjdpfjxfr Uusx Ah Esw Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: excellent (used), 1 lot thread plug gauges Gjdpfx Ahsi Dr Ake Ejbw ca.66 pieces in one drawer Dimensions, see pictures

Condition: good (used), Internal Item No.: 25080 No VAT can be shown, as the item is subject to differential taxation. Internal cylindrical grinding machine Overbeck 250i + Operating manual Godextndbepfx Ah Eebw + Three-jaw chuck (workpiece holder) + Collet set (workpiece holder) Technical data: Max. clamping diameter of workpiece: 140mm Max. clamping length of workpiece (in front of spindle flange): 250mm Grindable bore length: 160mm Grindable bore diameter: 0.8–90mm Max. workpiece weight: 15kg Swing diameter under guard: 150mm Workpiece spindle speed (stepless): 112–1000 rpm Swivel range of workpiece spindle headstock: 45° Internal taper of workpiece spindle: MT4 Spindle bore: 26mm Grinding spindle speed range: 6,000–175,000 rpm Incremental infeed: 0.001–0.01 mm Power requirement: 7.3 KVA Space required: 2.8 x 2.5m Weight: 1,750kg The machine comes from a training workshop in a rehabilitation clinic, and is in very well-maintained condition.

Condition: used, Bench drilling and tapping machine FLOTT type TBZ 15 GL Serial no. 32177027 Year of manufacture 1986 Drilling capacity 15 mm Spindle holder MK2 throat 195 mm Pinol stroke 80 mm Table size 275 x 200 mm Column diameter 70 mm Spindle speed 80 - 4500 rpm 18 steps Motor power 0.55 + 0.75 kW Mains connection 380 Volt, 50 Hz - 6 belt speeds from the motor and 2 belt speeds to the drill spindle 2 motor speeds - 3 guide cartridges 0.7mm + 0.8mm and 28G available - Drill head height adjustment via crank with rack and pinion on the column - Original metal base Space requirement L x W x H 700 x 350 x 1850 mm Gbsdpodzp S Nofx Ah Eew Weight approx. 150 kg good condition

Condition: used, Year of construction: 2025, machine/vehicle number: IntNr231426, Filtration System E 120-BSC-2-H Oil / Emulsion Mist Extraction Units FEATURES / CHARACTERISTICS: - Service door opening direction: upwards, in airflow direction - Air outlet: radial - Equipped with pre-filter and mechanical neutralization filter, plus two electrostatic filtration stages for aerosols, consisting of ionizers and collectors - Adjustable fan (ErP-ready) - 'Ready for operation' status indicator - Electrical system compliant with EN 60204 - Entire system constructed in accordance with current Machinery Directive TECHNICAL DATA: - Fan capacity: 2,400 m³/h (free blowing) - Extraction capacity: up to 1,200 m³/h - Operating voltage: 230 V +/-10% (207–253 V) - Frequency: 50–60 Hz - Connected load: 0.93 kVA - Differential pressure: 840 Pa - Sound pressure level: approx. 70 dB(A) - Maximum operating temperature: 40 °C - Protection rating: IP54 Transition Piece E/M 120/240, 200-S-B-90 E-120-BSC-2: 84213925 – Country of origin: CZ Power plug: 85444290 – Country of origin: DE Customs tariff number: 84213925 Dimensions (L x W x H): 1,130 x 660 x 610 mm Weight: approx. 110 kg Warranty: subject to agreement Paint finish: RAL 7035 (light grey) or as agreed Delivery time: subject to agreement Gbodpfx Aexu Natjh Esw Technical data, specifications, and availability subject to change and corrections. Prior sale reserved.

Condition: used, This listing is for the Mitutoyo BM1-8-1B/PD Gauge block set The unit is in full working condition and is ready for immediate release Gbjdjxv A Rzjpfx Ah Eow This Mitutoyo 81-piece rectangular steel gauge block set is crafted from high-chromium alloy steel and features an ultra-micro-lapped surface finish for precision and durability. Carefully heat treated and stress-relieved, these blocks provide exceptional wear resistance, stability, and wringing performance, ideal for high-precision calibration, inspection, and tooling environments. Mitutoyo gauge blocks meet or exceed all internationally recognized standards (ASME, ISO, JIS), with flatness, parallelism, and surface finish that often surpass government specifications

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 20, Used CNC internal broaching machine Make: FORST Gbedpfx Aev Htlush Eow Type: RISH 63X1000X320 Year of manufacture: 1999/ Reconditioned Mach. No.: 20

Condition: excellent (used), • Sturdy, stable aluminium base • Two guides for smooth travel • LCD display with clear readout • Functions: ON/OFF, ZERO, HOLD, PRESET • Original “Made in Japan” quality Gbjdpfjw Rdt Isx Ah Esw • Readable serial number – authenticity guaranteed • Very good condition – used, tested equipment • No play, accurate and repeatable measurement • Ready for use – no additional accessories required An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks.

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Gjdpfx Aewz I Acjh Eebw Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min Gbodpsxr Aw Tsfx Ah Eew - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW - Machine weight: 5,500 kg

Condition: used, Year of construction: 1992, operating hours: 83,492 h, machine/vehicle number: IntNr231415, CNC lathe Traub TNS 26 DGY 2 turret, main and counter spindle Year of manufacture: 1992 Machining hours: 83,492 Control: Mitsubishi FR - SF System TX 8F Machine type: Twin-spindle turning center with Y-axis and driven tools Main spindle Bar capacity Ø approx. 26 mm Max. turning length 270 mm Max. spindle speed approx. 7,000 rpm Spindle outer Ø 60 mm Spindle drive power approx. 11 kW Counter spindle Max. bar capacity Ø approx. 26 mm Spindle speed approx. 7,000 rpm Gbodpfjxrda Njx Ah Esw Spindle drive power approx. 5.5 kW Turrets / tool revolvers 2 turret positions (upper and lower, i.e., two turrets) with driven tools Upper turret with Y-axis Tool holder, e.g., to DIN 69880: 25 x 48 and 16 x 16 mm Number of driven tool stations per turret: 12 Max. tool drive speed: 8,000 rpm Tool drive power: 2.6 kW Torque: 4 Nm Main and counter spindle: C-axis Bar feeder: STAMAG DN 26 Chip conveyor: Ruez Documentation/manuals included The machine is electrically and mechanically fully functional and can be inspected under power by prior arrangement. Technical details and specifications subject to change, errors excepted. Subject to prior sale!

Condition: good (used), axle configuration: 3 axles, first registration: 08/2012, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 2,800 mm, loading space volume: 94 m³, total length: 13,950 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R252.5, wheelbase: 9,010 mm, Year of construction: 2012, Equipment: ABS, = Additional options and equipment = - EBS - Rear doors - Air suspension - Disc brakes - Sliding roof = Notes = 08/2012 Kögel curtain sider with SAF axles featuring disc brakes (INTRADISC), ABS/EBS, sliding roof, rear doors, internal dimensions: 13.64x2.49x2.80m, 2 x 13 lashing rings, unladen weight: 6,320 kg, max. weight: 42,000 kg, tires: 385/65-R22.5 (L: 1/14/3mm; L: 1/7/6mm), Dutch registration = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread left: 10%; Tire tread right: 10% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 85%; Tire tread right: 45% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 20%; Tire tread right: 40% Weights Unladen weight: 6,320 kg Payload: 35,680 kg Gross vehicle weight: 42,000 kg Functional Body make: Kögel S24-1 Sliding roof: Yes Condition Technical condition: good Visual condition: good Identification Registration: OL-22-TB Additional information Gbodpfexuvlpox Ah Eew Please contact Arne Honingh or Piet Swank for further information.

Year of construction: 2018, operating hours: 303 h, condition: refurbished (used), functionality: fully functional, The internal engraving system delivered by Cerion GmbH in 2018 has seen almost no operating hours. The laser is in as-new condition. The original purchase price of the system was €49,000. Supra Laser Solutions GmbH is the successor to Cerion and Cericom GmbH in the field of internal engraving. The system is factory-tested and fully functional. A 12-month warranty is provided on the system, including the laser. Gbjdpjxvc Igjfx Ah Esw

Condition: excellent (used), Professional measuring station from the renowned brand DIATEST Germany, equipped with a precision digital indicator Mitutoyo ID-C112B (Code No. 543-250B). Gbjdpfx Ahexuibwj Eew The set is intended for precise measurement of heights, depths, diameters, clearances, or rolling elements in measurement labs, workshops, and quality control departments. • Base manufacturer: DIATEST Germany • Indicator: Mitutoyo ID-C112B / Code No. 543-250B • Measuring range: 12.7 mm • Resolution: 0.001 mm • Functions: "ZERO/ABS", "HOLD", "mm/inch" • Sturdy cast iron base with adjustable table • Technical condition: very good, functional, ready for use • Minor signs of use on the base's paint The price refers to one piece (complete set: base + Mitutoyo indicator). Shipping or personal pickup possible.

Condition: good (used), Internal item no.: 25087 Cylindrical grinding machine Schaudt AR 500 + Magnetic chuck D160mm + Internal grinding attachment! Grinding length: max. 500mm Grinding diameter: max. 300mm Centre height: 150mm Centre distance: 500mm Tailstock taper: MK4 Godpfxextpbbj Ah Eebw Machine dimensions (LxWxH): 2700 x 2000 x 1800mm Weight: approx. 2000kg

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm Gbjdpfoxr Aw Hsx Ah Eow - Table top width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 1560 mm Measurements depth 2000 mm Measurements height 2100 mm Machine weight 3000 kg Control Unit Godpfx Asxuw E Deh Ejbw Brand FANUC Model 31i-Model A Movement X-Axis Movement 220 mm X-Axis Rapid Traverse 20000 mm/min Z-Axis Movement 300 mm Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Workpiece spindle motor: 2 kW This VOUMARD VM 110 CNC T was manufactured in 2008. A robust internal grinding machine, it features a GE FANUC Series 31i-Model A control, a maximum grinding diameter of 150 mm, and a depth of 80 mm. It supports a longitudinal travel (Z-axis) of 300 mm and a cross travel (X-axis) of 220 mm. Consider the opportunity to buy this VOUMARD VM 110 CNC T internal grinding machine. Contact us for more information. Application Types Grinding

Condition: good (used), axle configuration: 3 axles, first registration: 07/2013, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 2,770 mm, loading space volume: 94 m³, total length: 13,950 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R252.5, wheelbase: 9,010 mm, Year of construction: 2013, Equipment: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Rear doors - Air suspension - Disc brakes - Sliding roof Gedsxuu Ntspfx Ah Ejbw = Remarks = 07/2013 Kögel curtain sider with SAF axles featuring disc brakes (INTRADISC), ABS/EBS, sliding roof, rear doors, internal dimensions: 13.64 x 2.49 x 2.77 m, 2 x 13 lashing points, unladen weight: 6,450 kg, max. weight: 42,000 kg, tyres: 385/65-R22.5 (L: 9/13/9mm; L: 2/15/10mm), Dutch registration = Further Information = Axle Configuration Tyre size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 55%; Tyre tread right: 15% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 80%; Tyre tread right: 95% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 55%; Tyre tread right: 60% Weights Unladen weight: 6,450 kg Payload: 35,550 kg Gross vehicle weight: 42,000 kg Functional Body brand: Kögel S24-1 Sliding roof: Yes Condition Technical condition: good Visual condition: good Identification Registration number: OL-78-ZP Further information Please contact Arne Honingh or Piet Swank for more information.

Condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, measuring range Y-axis: 1,000 mm, plate length: 1,200 mm, plate width: 800 mm, machine/vehicle number: 1162, No reserve price – guaranteed sale to the highest bidder! The machine is auctioned due to a business closure. Submitting a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Measuring range: up to 1,000 mm Plate dimensions: 1,200 x 800 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,200 x 800 x 2,200 mm Weight: 500 kg Gedpfxsxqqdls Ah Eobw EQUIPMENT Granite measuring plate

Condition: good (used), Hagen & Goebel - HG 22 EB / Thread Cutting Machine - Model HG 22 EB - Speed range: 180-1120 rpm - Table dimensions: 600x500 mm - Foot switch Gsdpfxoxvig No Ah Eebw Dimensions: LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and omissions.