Internal micrometer gauge 2 sets

Mitutoyo 18-150 mm

Condition: used, Technical details: Bedpfx Aevfdr Njnpsww Tool holder shaft type: BT 40 Tool holder shaft type: Futter / Chuck Tool holder shaft type: Weldon Big selection of BT 40 Tool holders for sale. All kinds of Weldon, Chucker etc. available. See pictures. *

Condition: good (used), Year of construction: 2005, operating hours: 4,630 h, turning length: 1,585 mm, spindle motor power: 30,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,585 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 2,700 mm, overall weight: 14,500 kg, Multi-tasking lathe MAZAK - INTEGREX 400 III-S MACH-ID 9809 Make: MAZAK Bedpfx Aez Ata Honpeww Type: INTEGREX 400 III-S Control: MAZATROL 640 MT PRO Year: 2005 Only 4630 Cutting hours Automatic door 40 CAPTCO C6-Tool magazin Robot interface 5 Axis simulteneous package Sub spindel with C-Axis and 0,0001 Degree Internal Grundfos 15 Bar coolant Chip conveyor Optional tooling package with 40 holders Max. turning Ø: 850mm X-Axis: 630mm Y-Axis: -115 to + 115mm Z-Axis: 1585mm B Axis: -30 to +195° Spindle bore: 102mm Speedrange: 3300Rpm Spindle power: 30kW Subspindle speeds:3300Rpm Subspindle bore: 102mm Subspindle power: 26kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm B-Axis power: 19kW Chip conveyor: Yes Tool eye: Yes Hours: 4630H Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: TNC 640, table load: 150 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK-A63, number of slots in tool magazine: 170, tool weight: 6,000 g, Universal Machining Center Manufacturer: MIKRON Type: HPM 450U Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical details: X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm B-axis: ° C-axis: 360° Spindle speed: 20,000 rpm Drive power at S1/S6 (40% duty cycle): 23/36 kW Bsdpfxsz Ic Afs Anpsww Torque at S1/S6 (40% duty cycle): 77/120 Nm Tool holder: HSK-A63 Number of tool positions: 170 Tool change time:

Condition: used, Year of construction: 2007, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, overall weight: 8,300 kg, Mikron HSM 800 – High Speed Machining Center Year 2007 | Heidenhain iTNC 530 | 24,000 rpm | 3-pallet changer High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC applications such as mold & die, graphite and electrode machining, as well as flexible production. Travels: X 800 mm / Y 600 mm / Z 500 mm with pallet size 800 x 600 mm. Equipped with a 3-pallet changer for efficient automated operation. The machine features a high-speed spindle up to 24,000 rpm with HSK-A63 interface and a 50-position tool magazine. Well equipped with high-pressure through-spindle coolant (18–70 bar) including band filter system, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and probing system (M&H). Additional features include APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process stability and thermal accuracy. Control: Heidenhain iTNC 530 Spindle speed: 24000 - rpm Travel Y-axis: 600 - mm Bwsdpfey Tkc Aex Anpew Dimensions of the clamping surface: 900 x 600 mm Travel Z-axis: 500 - mm Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 3000 x 2500 x 2800 mm Weight approx.: 8,300 kg Year of construction: 2,007 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, total height: 2,700 mm, total length: 3,800 mm, total width: 2,350 mm, table width: 500 mm, table length: 750 mm, overall weight: 9,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, Equipment: chip conveyor, documentation/manual, For sale: AXA DBZ milling machine - 2014 Heidenhain iTNC 530 HSC control 2 machining areas of 750x500 5-axis rotary table on one table (continuous) 22-tool magazine, SK40 Optical scales on all axes Bwjdpfxey D Enho Anpow Mist extractor Chip conveyor High-pressure pump External coolant filtration unit Machine in good working order, under power = can be tested 3-month warranty Installation and commissioning at the customer's site possible Suitable for pendulum machining (machining on one table, loading on the other).

Condition: excellent (used), DOOSAN PUMA 700LMB FANUC 21i-TB (2006) CNC LATHE WITH POWER TOOLS AND “C” AXIS Z-3000 MAIN FEATURES: Bwedpfx Ae Af Il Dsnpew -CNC FANUC 21i - TB 10.4” LCD Color Manual Guide -Swing over bed: 1,030mm -Swing over carriage: 800mm -Max. Turning diameter: 900mm -Max. Turning length: 3,200mm -Bar capacity: 164mm (ASA-A1-15) -Turning spindle: 45kw 1,500 Rpm -Gearbox -Motorized turret: 12 stations -Powered tools: 11Kw 3,000Rpm EQUIPMENT INCLUDED: -Hydraulic chuck SMW type KNCS diameter 630mm -C-axis 360 (0.001º) -Automatic tool pre-setter -Integrated tailstock -High-pressure pump 70 Bar Hydracell -Chip conveyor -Hydraulic steady rest ATLING (100-420mm)* -Tool holder set including 4 powered tool holders (2 Straight – 2 Angled)* CONDITION: Machine in Excellent Condition. Available for inspection in working order. Immediate delivery.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: CR690, overall weight: 1,350 kg, load capacity: 100,000 kg, Electric Chassis System Robot 100 Ton Set – OX TBC 100 The self-propelled trolleys offer a high load capacity of 100 tons and a very low height, with the ability to rotate 360°, making it possible to position them under all types of loads and for maneuvering. Motor-driven trolley models with hydraulic lifting cylinders are also available for loading onto vehicles or shelves, offering a speed of up to 5 m/min max. Bwsdpfx Aew Taikjnpjw Length - 1602 mm Width - 2019 mm Height - 315 mm Max. load/lifting capacity - 100 tons Remote control

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, bar passage: 117 mm, overall weight: 8,500 kg, The Hyundai WIA L400MC is in like-new condition. Inspection under power is possible at any time. Model: Hyundai WIA L400MC Design: Standard Bore Swinging diameter over bed: Ø 780 mm Swinging diameter over slide: Ø 535 mm Max. turning diameter: Ø 560 mm Max. turning length: 1,180 mm Bar capacity: Ø 117 mm Chuck size: Ø 381 mm (15") Max. spindle speed: 2,000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3,073 / 2,490 Nm Spindle drive: Belt drive with 2-speed gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1,200 mm Rapid traverse X/Z: 20 / 25 m/min Guideways X/Z: Box guide / Flat guideways Number of tool stations: 12 Tool holder, outer diameter (OD): □ 32 mm Tool holder, inner diameter (ID): Ø 63 mm Turret indexing time: 0.2 s Mount: BMT75P Driven tools Motor power (max./continuous): 7.5 / 5.5 kW Max. speed: 4,000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Tailstock Tailstock taper: MK5 (integrated) Quill diameter: Ø 150 mm Quill stroke: 132 mm Tailstock travel: 1,100 mm Additional technical data Coolant tank: 300 liters Bwjdpfx Ajz Ibaionpow Lubricant tank: 2 liters Electrical connection: 46 kVA Recommended cable cross-section: > 50 mm² Voltage / Frequency: 220 V / 60 Hz or 200 V / 50 Hz Footprint (L x W): 4,202 x 2,207 mm Machine height: 2,153 mm Machine weight: approx. 8,500 kg Control: HYUNDAI WIA FANUC i Series / FANUC 32i-B

Condition: excellent (used), Year of construction: 2020, This NTX 2500/1500 Second Generation is a fully equipped turn-mill center featuring a separate milling spindle and B-axis, designed for more complex 5-axis machining operations. Spindle hours: ca 7800h Control unit Fanuc F31iB5 with CELOS Ergoline (NTX Gen2) XYZ Travel 675 mm (-125+500) x 300 mm (±150) x 1562 +164mm for ATC Turning length 1530 mm Turning diameter 670 mm B-axis 240°(±120°) Main spindle speed 4000 rpm Through spindle hole 91mm Bsdpfx Anj Afnzhspeww Sub-spindle speed 4000 rpm Main spindle chuck 304mm (KITAGAWA B212) Sub-spindle chuck 304mm (KITAGAWA N-12A) Tool spindle speed 12000 rpm Toolchanger 76 ATC Spindle taper CAPTO C6 Machine weight 18160 kg Machine Height 2750 mm Machine floor space 6250 x 2830 mm Including: Renishaw RMP60 workpiece measuring system Tool presetter Chip conveyor Automatic Centering Steady Rest SMW Mist collector Interlit-TMF300/600 compact filter unit 70 bar Paper belt filter TMF300, tank volume 600L high pressure pump 70 bar - 32 L/min Workpiece unloader, conveyor and stocker Etc. Full technical description and options in the attached document. Machine can be viewed in operation upon appointment. Available for immediate delivery. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Bwsdpfozc D Aajx Anpsw Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.