Used Inspection Of Incoming Goods for sale (35,868)

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Fjdpfoz Ekfvjx Al Uegh Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT Fodoz Ekkxspfx Al Usgh CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Fodpfx Ajz Iwpgol Ujgh Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length Fjdpfx Aljzdz S Te Uogh - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Fgodpfx Aoz Ekb Del Ush Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: used, Metal detector on its own conveyor This Lock MET 30+ by Lock Inspection Systems (England) checks products for metal particles as they pass through the detector head on the belt. The detector sits on its own frame with a modular plastic belt and castors, so it is easy to place in a line. Product settings are selected with the keys on the display; one of the stored programmes is for tomatoes. The serial number and year of manufacture have not been filled in on the rating plate, so they are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. Fodpfjz Nc S Aox Al Uogh More photos and full specifications: / Type: Metal detector with conveyor Belt: Modular plastic belt Controls: Display with selection keys, stored product programmes Construction: Stainless steel, frame on castors

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Fjdsz En Axspfx Al Usgh Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, machine/vehicle number: H2X386E52851, Year of construction: 2014, operating hours: 4,974 h, load capacity: 1,600 kg, lifting height: 4,625 mm, mast type: triplex, overall weight: 3,320 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 4,625 mm MACHINE DETAILS Mast: Triplex mast with full free lift Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Rest voltage: 48.51 V Service valid until: 10/2027 Safety inspection valid until: 10/2027 Machine type: Electric forklift Dimensions & Weight Dimensions (L × W × H): 3,200 × 1,100 × 2,121 mm Weight: 3,320 kg Operating hours: 4,974 h EQUIPMENT Former Linde full-service unit Semi-cab with windshield and wiper Roof window White, non-marking tires LED work light, front LED work light, rear Safety light, rear Comfort seat with lumbar support Charger Hydraulic function: 3rd valve Fgjdoz Ixcnopfx Al Ujh Side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if collection is not made within the specified period. Outstanding storage fees must be paid in full before collection. Lot number: 110

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Fodpfxsz Iw Tre Al Usgh Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, machine/vehicle number: FN572336, Year of construction: 2018, operating hours: 10,006 h, load capacity: 1,600 kg, lifting height: 3,700 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,700 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 2,360 mm Own weight: 3,300 kg Fgsdpfxoz Iwm Sj Al Ush Battery voltage: 48 V Battery capacity: 750 Ah Battery type: 6 PzS Battery voltage in idle state: 51.6 V Service valid until: 09/2027 UVV (accident prevention regulations) valid until: 09/2027 Operating hours: 10,006 h EQUIPMENT Formerly a Jungheinrich full-service machine Clear-view mast without central hydraulic cylinder Load backrest Full cabin with heater and windshield wiper LED work light at the front LED work light at the rear Comfort seat Side shifter All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 111

Condition: good (used), Year of construction: 2015, This inspection system is from Zumbach Electronics AG at Plastima Used Machinery in machine storage. The machine is from 2015 and is in good condition. - Brand Zumbach Electronics AG - Type Simac 63 Fjdpfetpnfbex Al Usgh - Year of construction: 2015 - Number of cameras 3 - Pipe diameter min. 2 mm - Pipe diameter max. 50 mm

Condition: used, machine/vehicle number: H2X386V12010, Year of construction: 2019, operating hours: 14,594 h, load capacity: 1,600 kg, lifting height: 3,145 mm, mast type: duplex, overall weight: 3,200 kg, No minimum price – guaranteed sale to the highest bidder! Fjdoz Ixinepfx Al Usgh TECHNICAL DETAILS Lifting height: 3,145 mm Load capacity: 1,600 kg MACHINE DETAILS Mast design: Duplex mast with full free lift Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Battery idle voltage: 51.13 V Service valid until: 10/2027 UVV (Occupational Safety) valid until: 10/2027 Dimensions & Weight Dimensions (L × W × H): 3,200 × 1,100 × 2,121 mm Weight: 3,200 kg Operating hours: 14,594 h EQUIPMENT Former Linde full-service unit EVO facelift model Color display Tilt angle display Side shifter Semi-cab Windshield with windshield wiper Roof window LED work light, front LED work light, rear Comfort seat with lumbar support Seat heating High-quality charger, year of manufacture 2026 Additional hydraulics: 3rd valve Additional hydraulics: 4th additional valve for fork positioner All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 188

Condition: used, Year of construction: 2018, operating hours: 5,834 h, load capacity: 2,000 kg, fork length: 1,150 mm, empty load weight: 900 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 375 Ah Battery type: 3 PzS Battery rest voltage: 25.04 V Dimensions & Weight Dimensions (L x W x H): 2,000 x 800 x 1,400 mm Own weight: 900 kg Service valid until: 07/2027 UVV inspection valid until: 07/2027 Operating hours: 5,834 h EQUIPMENT Linde full-service history formerly a Linde full-service unit Fedpfx Ajz Iwxhol Ujgh All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 437

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Serial number: RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging. Fodpfezl Scrjx Al Uogh

Condition: good (used), Year of construction: 1990, functionality: fully functional, Table spindle moulder TS110 Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000 and 10,000 rpm Reversible left/right rotation, brake Haffner 3-roller power feed, 4 feed speeds, Feed rollers new, Fgjdpfx Asv Im Swsl Ueh Good condition – machine has been inspected Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: used, machine/vehicle number: FN668522, Year of construction: 2022, operating hours: 2,910 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,500 mm Fork length: 2,200 mm Fork positioner range: 550–1,850 mm MACHINE DETAILS Mast type: Free-lift mast without a central hydraulic cylinder Battery year of manufacture: 10/2022 Battery voltage: 80 V Battery capacity: 775 Ah Battery idle voltage: 84.3 V Service valid until: 07/2027 UVV certificate valid until: 07/2027 Dimensions & Weight Dimensions (L x W x H): 4,700 x 1,300 x 2,400 mm Own weight: 5,500 kg Operating hours: 2,910 h EQUIPMENT 3rd + 4th valve Formerly a Jungheinrich full-service unit Fork positioner with side shift Full cab Heater Windshield wiper LED work light, front LED work light, rear Road traffic lighting with turn signals for road approval Fjdez Iwlbepfx Al Ujgh Orange warning light Comfort seat with lumbar support All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving confirmation of payment by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 97

Condition: excellent (used), functionality: fully functional, LOCK INSPECTION SYSTEMS MET30+ | Industrial conveyor metal detector Manufacturer: Lock Inspection Systems Model/Type: MET30+ 3f Overall dimensions: 3000 x 1100 x 1900 mm Belt width: 600 mm Detection aperture dimensions: 620 x 270 mm Fsdezdb Ebspfx Al Ujgh The MET30+ 3f is a professional, industrial metal detector from the British brand LOCK INSPECTION SYSTEMS (now part of the renowned Loma Systems group), representing a technologically advanced inspection device designed for demanding production lines in the food sector (meat, bakery, frozen food, processing) and the pharmaceutical sector. Equipped with a multi-frequency "3f" system and advanced digital signal processing (DSP), the detector guarantees the highest level of detection sensitivity. The device easily identifies small metallic contaminants – including ferrous metals, non-ferrous metals (e.g., copper, aluminum), and particularly difficult-to-detect magnetic and non-magnetic stainless steel, regardless of their depth within the product. The core of the machine is a powerful head with a wide 620 x 270 mm inspection window, working in conjunction with a conveyor belt with a width of 600 mm. These technical parameters allow for the seamless inspection of large-sized products – bulk packaging, cartons, frozen blocks, and products fed in bulk on a continuous system. The MET30+ model features built-in memory that allows saving programs for many different products and an advanced product effect compensation function. This effectively eliminates false alarms caused by the natural conductivity of the food being inspected (e.g., high humidity, salt content in meat, or freezing temperature), while maintaining maximum precision in operation.

Condition: excellent (used), Here, we offer you an inspection system for crystalline silicon solar modules. Reliable quality assurance and process control throughout the entire solar module production. The Dr. Schenk SolarInspect series was developed to meet the specific requirements in the production of crystalline silicon solar modules. These ready-to-use vision systems provide reliable quality control for the entire ongoing production process. Furthermore, continuous monitoring of the production process allows for timely corrective measures to be taken in the event of process deviations. In the production of crystalline silicon solar modules, textured glass substrates are used instead of uncoated glass. Textured glass increases the transmission of sunlight. The optical signals in the vision system, triggered by the surface structure typically used for glass substrates in silicon solar modules, are often similar to or even stronger than those of the actual defect being inspected. Fgsdszdtgijpfx Al Ush Dr. Schenk has developed and manufactured SolarInspect, a system that specializes in the precise differentiation between glass structure and defects on the entire material surface, including the edges. Thanks to an innovative optical design, Dr. Schenk's inspection system can clearly detect glass defects and distinguish them from the glass structure. Reliable inspection of: - Uncoated incoming glass - Uncoated textured glass - Coated glass, e.g., AR (anti-reflective) coated - Layer application - Finished modules Detection of: - Sheet glass defects, e.g., bubbles, inclusions, scratches - Dimensions - Edge defects - Layer defects, homogeneity and thickness of AR-coated glass SolarInspect - Exceptional performance features: - Innovative and modular optical design - Low operating costs - Ready-to-use vision systems optimized for specific process step requirements - Customized solution for all types and sizes of solar modules - Repeatable detection and evaluation - User-friendly quality and analysis tools for production control and process analysis - Easy integration into new and existing lines - Industrially proven design Type: SolarInspect Condition: used Sale is ex works. Scope of delivery: (See image) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Internal combustion forklift, gas-powered forklift STILL model RX 70-16T Serial No. 517314G00021, Year of manufacture 2016 Rated load capacity 1600 kg Lifting height 4920 mm Fjdpfxeinldwe Al Uogh Fork length 1000 mm Fork carriage width 980 mm Overall height 2160 mm Overall width 1100 mm Overall length without forks 2200 mm Self-weight 3040 kg - Triplex mast with full free lift 1550 mm - Hydraulic side shifter - Internal combustion electric drive - 4-cylinder Volkswagen internal combustion engine with 30 kW - Hydraulic power steering - Work light at the front - Rear warning light (blue) - Warning flashing light at the rear (yellow) - 4-wheel superelastic, solid rubber tires, front 18X7-8 SE / rear 18X7-8 SE - Battery charger for starter battery, maintenance charger VICTRON - New TÜV inspection and UVV certification (surcharge 150 EUR net) in good condition

Condition: good (used), functionality: fully functional, For sale is a robust SF Scheer dowel hole drilling machine in a heavy-duty industrial design. The machine is ideally suited for the precise production of dowel holes in the furniture and interior design industries, as well as in professional window and door construction. Thanks to its solid cast iron construction, the machine operates with extremely low vibration and high precision. The horizontal drilling unit features 3 drilling spindles with a 32 mm spacing, making it optimally suited for dowel connections using the proven 32 mm system. Technical specifications Manufacturer: SF Scheer Machine type: Dowel hole drilling machine Number of spindles: 3 Spacing: 32 mm Stroke: 8 mm Motor power: 1.1 kW Voltage: 400 V Heavy-duty industrial design Equipment 3-spindle drilling unit 32 mm drilling pattern Precision work table Adjustable stop Adjustable drilling depth Pneumatic maintenance unit with pressure regulator and water separator Robust cast iron construction Mechanical operation 400 V high-voltage connection Scope of delivery SF Scheer dowel hole drilling machine Stop system Pneumatic maintenance unit Tool wrench as shown in the photos The machine is in a well-maintained, used condition with the usual signs of wear and tear. The sliding and support surfaces are in good condition, and the machine generally makes a solid impression. It is ideally suited for daily professional use. Inspection and test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information is without guarantee. Fgsdoziz S Rspfx Al Ush

Condition: new, Wood impact protection, 110 cm, new 🧰 Product features • Manufacturer: various • Color: yellow, wood • Condition: New • Length: approx. 115 cm • Width: approx. 18 cm • Height: approx. 40 cm • Scope of delivery: 2x U-profile, 2x wooden battens 110 x 75 cm, and 8x M12 concrete anchors Various designs available, please inquire! 💰 Price €110,- net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by arrangement • Product number: P10441 Constantly over 5,000 linear meters of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Fjdpfozfaimex Al Uogh Are you looking for high-quality warehouse racking to buy? With around 100 of its own employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelf racking, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Flat-rate purchase: purchase of merchandise, equipment & complete warehouse stocks including thorough clearance. 2. Commission auction: conducting auctions on behalf of customers. Our full service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and thorough handover. Whether you have found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2023, machine/vehicle number: SE_00650, This RIDE60 type electric motor test stand, manufactured by FAZUA (custom-built), is for the RIDE60 electric drive series and was manufactured in 2023. It will be auctioned off in our online auction entitled "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: Manufacturer: FAZUA (custom-built) Type: End-of-line test stand Year of manufacture: 2023 (according to the nameplate of one station) Condition: used, functionality not checked Quantity: 3 identical stations available (auctioned separately) Location: 85521 Ottobrunn near Munich Fgedpfx Aoz Ng Ayol Uoh Test stand for final inspection of e-bike drive units from series production. The drive unit is tested and calibrated under load; power and torque are measured, among other parameters. Complete with control computer and label printer. Technical data (information without guarantee) Test track with servo motor, 2 pneumatic brakes, and torque sensor Metal bellows couplings Mount for the drive unit with quick-release mechanism Safety enclosure made of aluminum profile with transparent flaps Base cabinet with 3 doors Control panel with emergency stop, main switch, start button, indicator lights, and 2 manometers Panel PC 15.6" Label printer Zebra ZT231 Hand scanner (not on all stations) Operating voltage 230 V / 16 A / 50 Hz (according to the nameplate of one station) Compressed air connection required (6.5 bar) Dimensions approx. 1,800 x 600 x 1,400 mm Sale Sale via online auction on RESTLOS.com. Bidding ends on 19.10.2026. Viewing: [16.10.2026; 9:30 a.m. to 12:00 p.m. – booking via our RESTLOS auction platform] All information without guarantee. Functionality not checked. Test software is not included in the offer unless expressly stated.

Condition: used, Year of construction: 2015, Compact X-ray inspection system for packaged food This Ishida IX-EN-2493-S is an X-ray inspection system built in 2015 by the Japanese manufacturer Ishida. It detects high-density foreign bodies in packaged products, such as ferrous and non-ferrous metals, stainless steel, glass, stone and bone. The tunnel is 240 mm wide and 150 mm high, the belt runs at a variable 10 to 60 m/min and handles products up to 5 kg and from 20 to 450 mm long. The machine is built in stainless steel (SUS304), has an IP66-rated inspection chamber and is operated via a 15-inch touchscreen. The line sensor has a resolution of 0.4 mm. Actual detection sensitivity depends on the product, its dimensions, the packaging and where the contaminant sits. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: X-ray inspection system Fodpfx Aez I Ir Sel Uegh Tunnel size (w × h): 240 × 150 mm Belt speed: 10–60 m/min Max. product weight: 5 kg Product length: 20–450 mm X-ray power: max. 150 W (30–75 kV, 1–3 mA) Line sensor resolution: 0.4 mm Controls: 15-inch touchscreen Construction: Stainless steel (SUS304), IP66 Dimensions (l × w × h): approx. 800 × 745 × 1,745 mm Weight: approx. 265 kg Power supply: 15-inch touchscreen

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Keyence VHX-970F” digital microscope Items for sale: 1x Keyence VHX-970F with We can easily configure the machine to meet your specific needs. Please feel free to contact us! Condition: This listing is for a used device, which may show signs of use (minor scratches or discoloration). Fgjdezpvdbepfx Al Ujh The unit has been tested to ensure it is in working order Packaging and Shipping: You are welcome to view the unit during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, please feel free to contact us directly.

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm Fjdpfx Aoy In Apsl Ujgh No of Grippers: 9 Thin sheet loading: yes