Used Biesse akron 435 for sale (246)

Edge banding machine Edgebander Biesse Akron 1320

BIESSE AKRON 435D X

2008

used

Call

BIESSE 435D X Edgebander (With Pre-milling) Description: 10" Touch screen panel Pre milling unit 65mm height (FI-502) Glue tank interchangeable (VC-511-R) Edgebandtransport with cutting unit rolls/strokes (CB-500) Pressure zone with 3-rolls Saw unit (IN-501) Multifunctional corner rounding unit (CR-200) Radius scraper (RBK-502) Glue scraper (RCC 701) Extendable support rail Light in cabin Technical specifications: Panel thickness (min/max) : 10 – 60 mm Edgeband material height (min/max) : 14 ...

more

Listing

Wijchen

(dealership location)

7560 km

Biesse Akron 1320

2013

used

€9,500

ONO VAT not applicable

Call

Edge banding machine Biesse Jade 340 Serial No. 40278 Year of construction 2013 Glue unit Edge trimming unit Fine trim unit Edge scraper unit Poloshing unit Fioa9npf Panel height 10-60 mm Height of the edging material 14-64 mm Thickness of material to edgeband in rolls/strips 0.4-8 mm Panel overhang 25 mm Minimum panel length 150 mm Minimum panel width (with 140 mm length) 85 mm Minimum panel width (with 250 mm length) 50 mm Speed up to 12 m/min. Dust extraction system for each working unit 1...

more

Listing

Nevers

(dealership location)

7693 km

Edgebanding machines

BIESSE Edgebander AKRON 440 AX

ready for operation (used)

€22,000

Call

Technical characteristics Useful height 10 to 60 mm Sold without operator feedback Touch screen Edge magazine Roller Cutter Diamond sizing Gluing unit with pre-cutter End cutting Pre-gluing C7uy98vjq Trimming Copying unit Edge scrapers Glue scraper Brush and leister Edge strips 10 mm Feed speed 12m/min Minimum band thickness: 0.4 mm Maximum band thickness: 3mm Power and Motors Pluging: Three-phased Power: 18 Kw ...

more

Listing

7514 km

Single Edgebanders

BIESSE AKRON 1330

used

Call

Premilling Unit: yes Corner Rounding Unit: yes C02pbklztg Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

more

Listing

128, K. Kryla 1, Sadová, 612 00 Brno-Brno-Královo Pole, Česko

8348 km

Refurbished AKRON 440

BIESSE AKRON 440

2010

refurbished (used)

€22,000

Call

Refurbished Biesse AKRON 440 gluing machine 1. Pre-milling unit + spraying 2. Applying EVA glue 3. ABS pressure unit4 4. Capping unit Cgenihrb 5. Roughing unit 6. Rounding unit 7. Radius lock 8. Glue scraper 9. Brushes 10. Hair dryers

more

Listing

Juszczyn

8483 km

Edge Bander

BIESSE AKRON 440

2011

like new (used)

Call

Biesse AKRON 440 edgebanding machine Pre-milling Hijti2mra glue granulate Rounding units polishers

more

Listing

Medea

8398 km

Edge banding machine Edgebander Biesse Akron 850

Biesse Akron 1330

2015

used

Call

Edgeband thickness max 3 mm Thickness of coiled edgeband max 3 mm Corner rounding unit 2 motors Cyn3puzcbe Scraper unit profile and flat Aggregates actuated by control pneumatic Machine length 5.113 mm Control BIESSE SMART TOUCH 7 " Special equipment Suitable for nesting Edgeband height max 64 mm Workpiece length min 150 mm Workpiece width min 50 mm Feedrate max 12 m/min Glue system granulate glue pot below feeding chain Quick-change glue pot Trimming saw 1 motor Flush/radius/chamfer milling un...

more

Listing

Wijchen

(dealership location)

7560 km

Biesse Akron 850

2008

used

Call

Edgebander Biesse Akron 850 Year of construction 2008 Minimum panel length 140 mm Minimum panel width: 85 mm Min/max thickness of panel: 10/60 mm Te2uzi7n Min/max edge thickness: 0.4/3 mm Feed speed: 10/14/20 m/min Compressed air: 7 Bar Power Requirement: 415V - 3 Phase Transport dimensions: 6500x1200x1600mm (LxWxH) weight 1200kg

more

Listing

Brandenburg an der Havel

7904 km

single sided edge banding machine

Biesse Akron 850 Automatic

2008

excellent (used)

Call

Used edge banding machine incl. workpiece return system Manufacturer: Biesse Type: AKRON 850 Automatic Year of manufacture: 2008 Highlights - workpiece return - PU glue melting unit gPOD - AKRON-MATIC 800/4 (automatic setting of the machine) Technical data - workpiece height 10-60 mm - Workpiece height with form milling unit 35-60 mm - thickness of edges in rolls 0,4-3 mm - thickness of edges in strips 0,4-15-22 mm - Min. workpiece length 140 mm - Min. workpiece width (At length 140 mm) 85 mm 27...

more

Listing

Zellingen

7917 km

Akron 1330

BIESSE Akron 1330

2014

ready for operation (used)

€13,000

Biesse Akron 1400 edgebanding machine

Call

For sale is an Akron 1330 that has been running in our carpentry shop since 2014 and was also in operation until last. The machine is in age-appropriate condition and runs perfectly. Before renewed use, however, the machine belongs to basic maintenance. Dimensions (lxwxh):5x1x1,4m Weight: 1.500kg Equipment: Cyia0f2i9n incl. pre-milling unit All aggregates are occupied. The machine can be inspected at any time. A forklift is available free of charge for loading. You will receive an invoice ...

more

Listing

Křižíkova 2989/68a, 612 00 Brno-Královo Pole, Česko

8349 km

Edgebander Akron 640

BIESSE Akron 640

2005

excellent (used)

€13,000

ONO plus VAT

Call

Units: 1. Pre-milling unit Cj8wsklg9b 2. Applying Eva / PUR glue, 2 x tubs. 3. ABS pressure unit4. Capping unit 5. Roughing unit 6. Rounding unit 7. Radius lock 8. Glue scraper

more

Listing

Juszczyn

8483 km

Biesse AKRON 1400

2017

excellent (used)

Call

Biesse Akron 1400 edgebanding machine Pre-milling Front crosscut saw Py2c8e Rear crosscut saw Multi milling Filing of corners radial cyclone flat cyclone Polisher Year of production December 2017 CE certificate Machine available on request

more

Listing

Rosmalen

7545 km

BIESSE Akron 1330

2012

good (used)

Call

BIESSE Akron 1330 Edgebander Technical description: Panel height mm 10-60 Height of edge banding material mm 14-64 Thickness of edge banding material in rolls / strips mm 0.4-8 Panel protrusion from track mm 25 Min panel length mm 150 Min panel width (with length mm 150) mm 85 Min panel width (with length mm 250) mm 50 Track feed speed m/min 12 Dust extraction system for each operating unit 1 hood dia. mm 100 Pneumatic connection bar 7 Glue pot capacity kg 2 (approx.) Glue pot heating time at ½...

more

Listing

49 Clarendon Ave, Trowbridge BA14 7BW, UK

7111 km

BIESSE Akron 1400 series

refurbished (used)

€350

Call

80mm Dia x 65mm Cut height Pre-milking blocks for Biesse Akron 1400 series. Leitz Whisper Cut Blocks. New tips fitted and services by Leitz UK. Ready to fit to your machine. Se9bz Price is Ex-Works (UK) Shipping charged at cost.

more

Listing

Sesto Calende

8116 km

Single edge bander

Biesse Akron 845

2011

used

Call

Numerical Control with Sintra Software Panel height 10 - 60 mm Solid wood mm 0.4 - 15 Pvc / Abs mm 0,4 - 3 Multi-Speed Kit 12, 18 m/min Minimum panel length \ width mm 140 - 50 Working height electronically adjustable by C.N. Input guide electronically adjustable by NC Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier group with 2 motors electronically adjustable by NC Reel holder plate Lamp unit for panel pre-heating Glueing unit for EVA hotmelt glue with pre...

more

Listing

Loughlass, Co. Laois, Ireland

6731 km

Edge banding machine premilling

BIESSE AKRON 1400

2015

excellent (used)

€33,500

ONO plus VAT

Call

Ideal for multiple edging applications. PVC, ABS, Veneer, laminates and Solid Wood, from 0.4mm up 12mm thick Max edging height is 60mm Edge up to 12mm thick solid wood lippings which is ideal for fire doors. PUR glue pot which is also essential for fire doors. Features: • PUR glue pot • End trimmers • Top/Bottom profile trimmers with Bevel, 1mm radius, 2mm radius and Straight trimmers • Corner Rounding Unit Qguyt • Top/Bottom profile Scrapers with Bevel, 1mm radius and 2mm radius • G...

more

Listing

Willroth

7740 km

Edge banding machine

BIESSE Akron 440

2013

excellent (used)

Call

The following machine is for sale BIESSE Akron 440 edge banding machine Bzylq3r - Year 2013 - Available from approx. June 2023

more

Listing

Kežmarok

8564 km

BIESSE Akron 1320

2012

like new (used)

€14,500

Biesse Akron 1300 - 1330A

Call

I sell the edge banding machine Biesse Akron 1320 Year 2012. Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding manual adjustable Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Radius scrapers servomotoric adjustable Glue scrapers pneumatic adjustable Polishing brushes Rquav Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-...

more

Listing

Legden

7623 km

BIESSE AKRON 1300 / 1330 A

2021

ready for operation (used)

€49,500

ONO plus VAT

Call

Biesse edge banding machine Akron 1300 - 1330A built in 2021 including adapted suction piping for sale Furnishing: Diamond jointing cutter Hybrid gluing unit for the use of EVA and PUR in granular form. snipping unit milling unit corner copying radius scraper surface scraper buffing unit including nesting version Aggregates are controlled by axis motors, which can be adjusted to 100ths on the computer Screen operation via touch incl. 1 USB interface (for data import or external keyboard/mouse)...

more

Listing

49 Clarendon Ave, Trowbridge BA14 7BW, UK

7111 km

BIESSE Akron 1400 / 1440

new

€1,250

Call

Never fitted Gearbox and motor for the Glue roller on a Biesse Akron 1400 series machine. This unit was held in stock as a spare, but never used. Now the machine is sold, so the parts are available. Cr9pmggggc Price is EX-Works UK. Shipping will be charged at cost.

more

Listing

Sesto Calende

8116 km

Single edge bander

Biesse Akron 845

used

Call

Numerical Control with Sintra Software Panel height 60 mm Solid mm 12 Pvc / Abs mm 0,4 - 3 Multi-Speed Kit 12, 18 mt / min Working height electronically adjustable by C.N. Adjustable inlet guide Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier group with 2 adjustable motors Reel holder plate Lamp unit to pre-heat the panel Gluing unit for EVA hot melt glue with pre-melter Edge pressure group on straight profiles with NC adjustable pressure rollers End trimmin...

more

Listing

Biatorbágy

8603 km

Edgebanding machine

BIESSE Akron 1330-A

2012

refurbished (used)

€19,500

Edge banding machine EVA/PUR

Call

Technical description: Panel height mm 10-60 Height of edge banding material mm 14-64 Thickness of edge banding material in rolls / strips mm 0.4-8 Panel protrusion from track mm 25 Min panel length mm 150 Min panel width (with length mm 150) mm 85 Min panel width (with length mm 250) mm 50 Track feed speed m/min 12 Dust extraction system for each operating unit 1 hood dia. mm 100 Pneumatic connection bar 7 Glue pot capacity kg 2 (approx.) Glue pot heating time at ½ load min.10 (approx.) Rated p...

more

Listing

Kežmarok

8564 km

BIESSE Akron 1330A

2017

like new (used)

Call

I sell the edge banding machine Biesse Akron 1330A Year 2017. Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding manual adjustable / 2 glue tanks for EVA and PUR glue / vacuum storing tank for PUR glue tank Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling servomotoric adjustable Corner rounding unit 2-motor servomotoric adjustable Radius scrapers servomotoric adjustable Cki8a0iyjz Glue scrapers pneumatic adjustable ...

more

Listing

Sesto Calende

8116 km

Single edge bander

Biesse Akron 1440

2018

used

Call

SMART TOUCH 10 "Numerical Control with Sintra Software Panel height mm from 10 mm to 60 mm Solid mm 12 Pvc / Abs mm 0,4 - 3 Multi-Speed Kit 15-18 mt / min Working height electronically adjustable by C.N. Side roller conveyor with idle wheels for panel support High quality and productivity kit with higher pressure rubberized belt Anti-adhesive group Rectifier unit with 2 adjustable motors (KW 1.8 each) at 12000 RPM Lamps to heat the edge of the panel Reel holder plate Gluing unit for EVA hotmelt ...

more

Listing

Kežmarok

8564 km

Edge banding machine

BIESSE Akron 425 A-R

2009

excellent (used)

€8,800

Squaring/Edgebanding Lines

Call

I sell the edge banding machine BIESSE Akron 425 A-R Year 2009 Configuration: Edge height 8 - 65 mm Edge thickness 0,4 - 8 (12) mm Edge banding, End cutting saws pneumatic adjustable Tilting milling Radius scrapers R2 Polishing brushes Hot-air blower Ch0kutvjfs TOP condition, possible to test !

more

Listing

Tulsa

103 km

BIESSE - RBO STREAM SB

used

Call

Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB Position 2: Double Edgebanders BIESSE - RBO-STREAM SB Position 3: Panel Turning Device BIESSE - RBO-STREAM SB Position 4: Double Edgebanders BIESSE - RBO-STREAM SB Position 5: Automatic Drilling Machine BIESSE - RBO-STREAM SB Position 6: Automatic Drilling Machine BIESSE - RBO-STREAM SB Fiaa8cim8 Position 7: Panel Turning Device BIESSE - RBO-STREAM SB Position 8: Panel Stacking and Offloading BIESSE - RBO-STREAM SB

more

Listing

Jacksonville

1487 km

Biesse Stream B Edgebanders (2011)

BIESSE STREAM B

2011

excellent (used)

$20,000

Drilling and dowel inserting machine

Call

Biesse Stream B Edgebanders (2011) Kg 6510 Cq0tanwujn Stations: Coil feeder Gluing Unit Pressure Unit Premill End Trimming Unit Rough Milling Unit Fine Milling Unit MultiFunction Milling Unit Scraping Buffing Sound Enclosure Auctioneer's Note: (they have two machines and are including the second one that is not running as a parts machine) – Return conveyor not included S/N: 87560

more

Auction

Hiddenhausen

7703 km

BIESSE

used

24 days left

Details

Drilling and dowel inserting machine, manufacturer: BIESSE, type: Elix, year of construction: 2011, serial no.: 24007, max. working width: approx. 200 cm, 2 drilling spindles, 4 pneumatic hold-downs, 1 flat screen PHILIPS, approx. 17", 1 vibratory feeder BROVIND OB 300 AC, 1 glue pump 3xq0eqcv0s

more

Listing

7694 km

Edge banding machine

Biesse Roxyl 4.5

2009

used

Call

Second hand machine Year of manufacture 2009 I8xftbvsy single sided automatic edge banding machine with CNC control 10 " touch-screen Industrial conveyor chain 1"1/4 Joining milling unit FI-502 Glue application unit VC-710 Cross-cut unit IN-801 Flush trimming unit top and bottom RS-100 2 motorized multi-functional trimming unit CR-202 (FAST system with 4 positions standard) scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 workpiece thickness 10-65 mm max. workpiece height w...

more

Listing

Hardinxveld-Giessendam

7508 km

Beam saw wood saw 4450 x 4300 mm BIESSE SELCO EBL

BIESSE Rover A 1659

2014

good (used)

Call

BIESSE cnc machining centre, type Rover A 1659 Manufacture year 2014 Fzcnmg0 - 5-axis configuration - Working fields Y=5920 - X=1580 - Z=225 mm - Router 13 kW - HSK F63 - Milling spindle liquid-cooled - Multiple drilling unit X and Y - Horizontal drilling unit X and Y - Electronic Positioning System for work tables - Automatic Tool changer - Pressure-sensitive floor mats - Conveyor belt for waste - Becker vacuum pump - Incl. accessories

more

Listing

Wijchen

(dealership location)

7560 km

Biesse Selco EBL 110

2000

used

Call

Beam saw BIESSE SELCO Selco EBL 110 Year of manufacture 2000 Cutting capacity 4450 x 4300 mm Main saw motor 15kW 110 mm saw height Scoring saw motor 2kW 200 mm scorer Installation dimensions 7110x7900mm B9so3qoefb

more

Listing

Tulsa

103 km

Vertical CNC Machine Centres

BIESSE BREMA VEKTOR 15

used

Call

X axis working area: 3200 mm Y axis working area: 1300 mm Cyponlis3v Number of controlled axes: 3 axes Total number of drilling spindles: 23 Total number of tool changer positions: 10

more

Listing

7870 km

CNC processing centre windows & doors

BIESSE Rover C 6.65 Config. 3

2006

used

Call

max. workpiece length 6200 mm profile spindle 2 Stück main drive 14 kW Control XP600/NC-Hops CNC machining center Biesse Rover C 6.65 ----- Machine can still be seen in use For the production of windows, arches, doors, etc. Configuration 3: ----- Workspace: X = 6200mm; Y = 1520mm; Z=275mm Axis travels: X = 6820.5mm; Y = 1963mm; Z = 663 mm (5-axis head); Z = 350 mm (additional processing units) Automatic table EPS (automatic console and clamp positioning) Multiple clamping area for 10 wo...

more

Auction

Hiddenhausen

7703 km

BIESSE

used

24 days left

Details

CNC machining center, manufacturer: BIESSE, type: Rover K1532, year of construction: 2016, serial no.: 1000013386, working width: approx. 150 cm, 16-fold tool changer, 6 support beams, movable, each with 3 vacuum holders, with machine housing, control system, 1 flat screen BENQ approx. 24", keyboard and mouse, 1 vacuum pump, BUSCH MM1252AV 2jqjssv

more

Listing

Hochheim am Main

(dealership location)

7822 km

Biesse Rover 24 L

2003

used

Call

CNC machining center Year of manufacture 2003 Configuration 1-2 Machining dimensions 4500 x 1380 x 180 mm ATS special clamping system with 8 movable consoles with 24 vacuum modules 8 stops - 2 lateral stops stops with digital display vacuum pump 90 m³/h with auxiliary vacuum system for 2 working areas with Uniclamp module for workpiece thicknesses from 40 to 98 mm 2 additional lateral stops with workpiece auxiliary supports, pneumatic drilling head with 14 vertical spindles (7 in x ...

more

Listing

Hüllhorst

7697 km

Edge banding machine Edgebander Biesse Jade 340

BIESSE Rover 24 XL

2002

good (used)

Call

Woodworking - CNC machining center- Staircase construction Rover 24 XL from 2002 This CNC machining center has a working area of 6170 x 1170 mm a speed of 24000 rpm and a connection of 20 kW. Other information: 3rdemqifcd Machine with vacuum console holders. Div. tools. Ready for demonstration at the site.

more

Listing

Wijchen

(dealership location)

7560 km

Biesse Jade 340

2017

used

Call

Edge banding&nbsp Biesse Jade 340 Serie nr. 59494 Bouwjaar 2017 Pre milling unit Gluing unit Fine trimming unit Edge trimming unit Corner rounding unit Edge scraper unit Poloshing unit Glue scraper unit Hot air blower unit Panel height 10-60 mm Height of the edging material 14-64 mm Yw90tc Thickness of material to edgeband in rolls/strips 0.4-12 mm Panel overhang 25 mm Minimum panel length 140 mm Minimum panel width (with 140 mm length) 85 mm Minimum panel width (with 250 mm length) 50 mm Spe...

more

Listing

United Kingdom

6838 km

CNC Machine Centres With Flat Tables

BIESSE Rover A 3.40 FT

used

Call

X axis working area: 3665 mm Y axis working area: 1260 mm Bmyiun3f Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 18

more

Listing

Roreto

8134 km

AUTOMATIC BORING (DRILLING) MACHINE

BIESSE Techno 2000 FDT

excellent (used)

Call

Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 Ci70izgp Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes)...

more

Listing

BIESSE Machining center Rover C6.65 - C2902

Nevers

(dealership location)

7693 km

Machining centers

BIESSE Machining center Rover C6.65 - C2902

ready for operation (used)

€79,000

Wide belt sander, sanding machine Biesse Artech

Call

Technical characteristics Capacity: 6200mm in x 1535mm in y 400mm in z 5 axis electric spindle 11kW HSK63F 10 ATS beam workbench with motorized movement (4 suction cups / beam) 15° rotation on vacuum modules Positioning defined by the numerical control and recorded on each program 14 position chain tool magazine Independent tool changer on the front panel (large diameter / blade) Cuzbkjmmws Windows Computer BIESSE WORK staircase software Laser and vices not...

more

Listing

Wijchen

(dealership location)

7560 km

Biesse Artech Levia 110

2004

used

Call

Wide belt sander Biesse Artech Levia 110 Built in 2004 380V Working width 1100mm Sanding belt dimensions 1120x2150mm Min/max working height 3-200mm Throughput speed 5-10 m/min Engine 11kW Required extraction capacity 2450 m3/h 1st sanding unit Kontactrol 2nd sanding unit Combination with shoe Grzgclh Transport dimensions 1700x1525x2150mm, weight 1400kg

more

Listing

United Kingdom

6838 km

Single Edgebanders

BIESSE Jade 240

used

Call

Listing

Roreto

8134 km

AUTOMATIC BORING (DRILLING) MACHINE

BIESSE Techno FDT

excellent (used)

Call

Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 Feeding speed (m/min) 35 - 80 (ca.) Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Dwvvhkxwj Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 Bottom vertical units/supports (No.) 5 Drilling heads/blocks for each bottom vertical unit (N°) 2 Top vertical units/supports (No.) 2 Drilling heads/blocks for each bottom vertical u...

more

Listing

Nevers

(dealership location)

7693 km

Saws

BIESSE Horizontal panel saw SEKTOR 400

ready for operation (used)

€21,000

Call

Technical characteristics Snvqx capacity: 4400 x 2700 mm Cutting height: 70 mm Power and Motors Overall dimensions

more

Listing

United Kingdom

6838 km

Single Edgebanders

BIESSE Jade 240

used

Call

Listing

Nevers

(dealership location)

7693 km

Saws

BIESSE Automatic panel saw SELCO EB75

ready for operation (used)

€35,000

Vertical CNC Machine Centres

Call

Technical characteristics Digitized commandIncisorCut optimisation carriage advance 60 m / min max Dymgkzd pusher advance 40 m / min max 4 air cushion tables 2000 mm 11 collets on pusher digital control panel with optimization and cutting management Blade diameter: 400 mm Cutting thickness: 4300 mm Cutting length: 4300 mm Cutting height: 80 mm Number of clamps: 11 Power and Motors Power: 9 Kw ...

more

Listing

United Kingdom

6838 km

BIESSE SKIPPER V31

used

Call

X axis working area: 2500 mm Y axis working area: 900 mm Number of controlled axes: 3 axes Ce7khlttkm Total number of drilling spindles: 16

more

Listing

BIESSE Horizontal panel saw SELCO EBT 108 ACTIVE

Nevers

(dealership location)

7693 km

Saws

BIESSE Horizontal panel saw SELCO EBT 108 ACTIVE

ready for operation (used)

€45,000

Call

Technical characteristics Digitized commandElectrical ascent/descentIncisorMotorized controlled incisorAir cussion tableLifting tableCut optimisation lifting table 4400 x 2200 mm rear loading clamp opening 100 mm aligner quick blade change Brushless motor optimization of the carriage stroke blade carriage speed max 100 m / min expulsion of cut panels at the front WINDOWS PC with cutting diagram, lists, simulation, diagnosis, maintenance, online help, statistics Cuzfwvggr...

more

Listing

Nevers

(dealership location)

7693 km

Edgebanding machines

BIESSE Edgebander JADE 225

ready for operation (used)

€28,000

Call

Technical characteristics Panel thickness 10 to 60 mm Edge thickness 0,4 - 3 / 8 mm Minimum panel length 150 mm Calibration Gluing End cutting Trimming Rounding Radius scraper aggregate Glue scraper Brushing Power and Motors Power: 8.6 Kw Overall dimensions Weight: 1600 Kg Gktyxte2

more

Listing

Nevers

(dealership location)

7693 km

Machining centers

BIESSE Machining center ROVER 30S2

ready for operation (used)

€12,000