Used Biesse Rover 15 for sale (265)

Condition: excellent (used), Year of construction: 2021, Operating hours: 2,000 h, CNC machining center Biesse Rover A1542 Year of production 2021 Working fields : X = 4140 mm Y = 1560 mm Z = 275 mm C = 360 degrees 8 pcs. of ATS beams - 24 carriages Xsokbxv 8 pcs. Rear line bumper, stroke 115 mm, extension 25 mm 8 pcs. Middle line bumper, mounted at 685 mm, stroke 140 mm 8 pcs. Front line bumper, stroke 1348 mm, extension 140 mm. 4 side bumpers with 140 mm stroke (2 left + 2 right) including pneumatic installation. 4 removable center bumpers with 140 mm stroke (2 Left + 2 Right) including pneumatic installation. BUSCH pump with a capacity of 290 m3/h Electro-spindle 13.2 kW (17.7 hp) HSK F63 and air cooling BH 29 2L drilling head with automatic lubrication. 16-position turreted tool magazine mounted on X-axis carriage 8-position magazine for quick tool change In addition, HSD angle aggregates The machine has only 500 hours worked!

Condition: ready for operation (used), Technical characteristics CNC ROVER A machining center BIESSE's Rover A series machining centers are specially designed for daily milling and drilling operations on panels, doors, component doors and furniture. The mobile gantry structure is made of extra-thick electro-welded sheet steel and stiffening hangers to minimize distortion during machining. For movement of the moving column along the longitudinal axis (X axis) and in the transverse direction (Y axis), BIESSE has opted for a rack-and-pinion solution, enabling higher acceleration and speed parameters than those achievable with a ballscrew. Controlled axis motors : Brushless motors, controlled by digital actuators. Hardened steel controlled axis guides. Automatic centralized lubrication system. Machine equipped with two vacuum pumps, 250 m3/h and 300 m3/h. Activation of vacuum and pneumatic systems is available from any point along the machine's X work zone. Working range (vertical electrospindle axis): X= 5540 mm Y= 1560 mm for 4 axes, 1570 for 5 axes Z= 230 mm with modules H=74 mm /Configuration 1B and 3B Z = 275 mm with modules H=29 mm / Configuration 1B and 3B 8 ATS aluminum worktops 1 X-axis metric ruler for correct positioning of worktops 8 metric rulers on Y axis for correct positioning of workpiece clamping systems 32 carriages 132 x 132 x H 41.5 mm Each carriage rotates the modules every 15° 32 plugs for closing the carriages Additional quick-fit connections for special jigs EPS (Electronic Positioning System) automatic positioning for worktops up to 1550 mm, allowing automatic positioning of clamping devices at selected points. An entire half machining zone can be positioned in hidden time while the machine is machining (avoiding major productivity losses). Each carriage is equipped with a blowing system to ensure that the machining plane on which it slides is always clean. 2 X-shaped machining zones Reference systems : Rear line stop with 115 mm travel Intermediate line stop positioned at 685 mm Front line stop positioned at 1348 mm 4 side stops with 140 mm travel (2 left and 2 right) 2 additional side stops (1 left and 1 right) 1 retractable linear stop for raw panels. Vacuum module 132 x 146 Vacuum module 132 x 75 Vacuum module 132 × 54 Bn79897Gwp0 CFT system : Vacuum system for aluminum CFT modules, for left work area Aluminum vacuum module, dimensions : X=1250 mm, Y=625 mm, H=74 mm, for modular worktops With this solution, it is possible to prepare a continuous surface for thin/flexible panels or for nesting, bending, etc Uniclamp vice Support base 130 x 130 mm Flat disc 130 x 130 mm Double-movement Uniclamp vice Circular support base, diameter 130 mm Clamping workpieces thicknesses from 40 to 98 mm Horizontal vice, height 74 mm Chip and waste conveyor belt Configuration (3B) : Machining unit 5 axis 13kW electrospindle, up to 20000 RPM HSK F63 spindle Liquid-cooled C axis sewing : 360° continuous rotation Maximum undercut angle: -5°. Drilling unit BH 17 L drilling head Up to 17 independent tools Single and multiple drilling Work on all 5 faces of the workpiece and grooves with X-direction blade on the upper face. 10 independent vertical spindles, 32 mm centres 5 in X direction 5 in Y direction 3 opposite independent horizontal spindles, 32 mm pitch 2 in X direction 1 in Y direction 1 circular blade ⌀ 120 mm For groove in X direction (useful cut 25 mm) Multifunctional unit 1 circular blade ⌀ 300 mm 2 independent Z axes (1 for the electro-spindle and 1 for the drilling and multi

Condition: like new (used), Year of construction: 2020, WORK CENTER C.N. Make: BIESSE Model: ROVER PLAS A FT 1536 Year: 2020 Gpba9K - Working range: 3.765 X 1.560 X 170 mm. - 1 Milling motor 13,2 Kw (17,7 HP) - Tool gauge - Predisposition for C-axis installation (360º) - 1 8-position rotary quick change - 2 working fields, (PENDULAR) - Vacuum pump 250 m3/h - DXF compatible software - Air conditioning electrical panel - BUMPER protection - CE STANDARDS NO DRILL COMB AVAILABLE.

Condition: used, Year of construction: 2013, Numerical Control NC 1000 with Biesse Works Software Working range in X axis 3765 mm Working range in Y axis 1560 mm Working stroke in Z axis 105 mm FT nesting full table worktop N° 1 vertical electrospindle with automatic tool change, HSK cones, with flange for aggregates and predisposition for C axis Vektor Automatic tool change system with 12 positions - positioned on the back of the machine BH 10 drilling head with independent spindles arranged as follows: - N° 6 verticals in the X axis - N° 4 verticals in Y axis Cross aggregate for horizontal drilling Protection system with perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Bq82Ifqvv8 N° 2 vacuum pumps of 250 m3\h TECHNICAL DETAILS TO BE CHECKED

Condition: excellent (used), "NESTING" CELL with 4-axes (X-Y-Z-C) CNC working Center, composed by: K09040A) AUTOMATIC LOADING/IN-FEEDING SYSTEM (type B) also for thin panels, with scissor table, movable arm (Sweeping Arm) with vacuum suction cups, K09040B) CNC "nesting" (flat table) "BIESSE" Mod. Rover A - FT 1531 Gantry-drive (axe X) machine Epuqms0Fk Numerical Control BH660 (WRT) with Software bSolid (3D CAD-CAM) + bNest Safety cabin (enclosure) of the working head Bumper Unique flat working table FT Automatic Tools Changing System with two (2) Tools storage plates 1st Tools storage plate with 16 folds (on X axe) + the 2nd (revolver-type) with 8 folds (on Y-axe) Min. useful working area (X - Y - Z) mm 3100 x 1560 x 170 No. 8 Working areas (Multizone) - No. 3 Vacuum pumps (capacity 250 m3/h each) Separate electric and command cabinet - Total installed power (Kw) 39,45 WORKING GROUPS (TOP): No. 10 Independent vertical boring spindles (5 in X + 5 in Y) Drilling head BH 10 motor-power (Kw) 3 No. 1 Aggregato HSK F63 as Circular Saw (max. diam mm 215) No. 1 Vertical electro-spindle HSK F63 (C-axe at 360° - MK259), motor power (Kw) 19,2 K09040C) AUTOMATIC OUT-FEEDING SYSTEM (type 1536) with motorised belt (length mm 4410)

Condition: like new (used), Year of construction: 2020, WORK CENTER C.N. Make: BIESSE Model: ROVER PLAS A FT 1536 Year: 2020 - Working range: 3.765 X 1.560 X 170 mm. - 1 Milling motor 13,2 Kw (17,7 HP) - Tool gauge - Predisposition for C-axis installation (360º) - 1 8-position rotary quick change - 2 working fields, (PENDULAR) - Vacuum pump 250 m3/h - DXF compatible software Dausdfxpw - Air conditioning electrical panel - BUMPER protection - CE STANDARDS NO DRILL COMB AVAILABLE.

Condition: excellent (used), Year of construction: 2005, Operating hours: 4,441 h, Functionality: fully functional, Machine/vehicle number: 51596, Biesse Rover 24L CNC. 30m/s., 2850kg. 4500x1300mmx180 Begscty

Condition: good (used), Year of construction: 2003, BIESSE ROVER B 4.35 machining center Beams 8 pieces x 4 blocks each Updoosxsrl Motor HSD 10kW ISO30 chuck Magazine 10 positions Aggregate with saw + drills 12 vertical 6 horizontal Rietschle vacuum pump type VTB250 200mbar motor 5.5kW Price is subject to reasonable negotiation Shipping possible at buyer's expense

Condition: used, Year of construction: 2005, Working dimension X: 4.600 mm Working dimension Y: 1.535 mm Working dimension Z: 250 mm Independent Z-axes: 2 Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 9 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 34 Chain changer: Yes BIESSE Pick up: Yes RFID-based tool management: Yes Vertical drilling spindles: 13 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction BIESSE Drilling aggregate BH 22 L: Yes Cantilever machine: Yes Machine table: Pod and rail table Workpiece support aids: Yes BIESSE Preparation for Uniclamp: Yes Two rows of stops: Yes Electronic end position detection: Yes Number of consoles: 8 4-field processing: Yes Self-adjusting machine table: Yes BIESSE Automatic machine table EPS: Yes Vacuum pump: Yes Capacity vacuum pump: 250 m³/h Safety device: Safety mat Chip conveyor: Yes Une7Bmtrbz Interface for .dxf data: Yes Automatic lubrication: Yes Control cabinet cooling: Yes Control: BIESSE XP 600 Software: DIREKT CNC NC-HOPS Conformity marking: CE mark Weight: 7.100 kg

Year of construction: 2015, Condition: used, *Sale price-valid until 30.11.2024* 5-axis CNC machining center Used machine Cq2Qxvcxxk Year of construction 2015 Work area: X = 3280 mm Y = from 1580 to 1660 mm, according to the working conditions Z = 180 mm - 5-axis machining unit and drilling unit with vacuum modules vacuum modules H = 74 mm Z = 225 mm - 5-axis machining unit and drilling unit with vacuum modules vacuum modules H = 29 mm Modification of the protective device of the machining unit to allow the loading of a panel with parts up to 2100 mm in Y. Axis travel X = 3706 mm, Y = 2294 mm, Z1 = 515 mm, Z2 = 371 mm Remote control RM 850 Safety device in accordance with the requirements of EEC Directive 2006/42 6 ATS workpiece supports - 24 module supports The work area consists of: ? 2 aluminum supports (1 Li and 1 Re) on which the lateral stops are adjusted ? 6 aluminum workpiece supports. The workpiece supports are guided on linear guides with recirculating ball bearing slide blocks. Clamping takes place on the front and rear linear guide by means of pneumatic cylinders. Clamping is released by a push button on the front of the workpiece support. ? 1 millimeter scale in X for correct positioning of the workpiece supports. ? 6 millimeter scales in Y for correct positioning of the fixtures for workpiece clamping. ? 24 module supports 132 x 132 x H 41.5 mm with independent pneumatic clamping, to accommodate different clamping systems for workpieces of various shapes and dimensions. Furthermore, the vacuum modules can each be rotated by 15° on the module carriers; an ideal solution for molded parts. ? 24 locks for the module carriers without template. Automatic positioning (EPS) for work tables. "EPS" (Electronic Positioning System) device for NC-controlled positioning of the workpiece supports and carriages, complete with clamping devices to avoid operator errors. Fast set-up times are guaranteed by: simultaneous movement of all workpiece supports in the X direction and a row of vacuum modules in the Y direction Positioning of a work field while the machine is working: enables machining in pendulum mode without dead times and thus guarantees increased productivity. The positions of the workpiece supports and the vacuum modules are defined and saved in the NC programs. Each workpiece support can be moved individually and is equipped with a motor with a transmission system using a pinion and toothed rack. Each row of vacuum modules can be moved individually using a motor and toothed belt transmission system. * Depending on the total number of work tables on the basic machine Subdivision of the pneumatic system into 2 working areas Rear row stop with 115 mm stroke and 25 mm stop extensions. The stops, pneumatically lowerable and CNC-controlled, have a diameter of 22 mm to ensure maximum stability and are prepared for holding narrow part clamps, devices for veneer overhang and sensors * Depending on the total number of workpiece supports selected Stop of the middle row, positioned at 670 mm, with

Condition: like new (used), Year of construction: 2017, Worktable size: 6700x1600 8 bars with 4 carriages each with automatic positioning No. 2 ES959 - HSK F63 air-cooled 13.2KW electrospindles Rpm: 24000 Uru8Fc2F3L Electrospindle stroke: 410mm Boring head Lub. Automatic Drilling unit stroke: 371mm Carriage edge tool magazine: 22 places Carriage edge magazine: 4 places Aggregates: Aggre109(BRUSH); Aggre44(LAMA215); GROTEFELD (L_GROT, S_GROT) Devices: no. 2 x Agg117(edge ref, edge scraper, glue scraper); Aggre99(edge ref) Tools: right/left edger Vacuum pumps: no.1 brand Becker oil-bath vanes Axis lubrication: automatic

Condition: ready for operation (used), Technical characteristics X axis travel : 3290 mm Y axis travel : 1100 mm Z axis travel : 326 mm Part passage : 170 mm Electrospindle : 5-axis spindle, 11 kW HSK F63 chuck Revolver-type tool magazine, 16 tool holders Tool magazine at end of work surface, 10 tool holders BH26 2L drilling unit : Vertical and horizontal drilling unit + grooving unit 16 vertical drill bits, 32 mm centres (8 X-oriented and 8 Y-oriented) 8 horizontal drill bits, 32-mm pitch (4 X-oriented and 4 Y-oriented) 2 grooving blades, diameter 120 mm, for grooving in X and Y (useful cut 25 mm) Independent Z drilling unit to optimize machining times Work surface : NC-controlled worktable with motorized moving beams 6 ATS beams with automatic positioning (EPS) and suction cups 3 steerable suction cups with motorized movement per beam 1 Vacuum pumps 250 m3/h Controls : On Windows PC RM850 remote control with integrated LCD screen 2 pedals for cycle start Controlled by BiesseWorks software BiesseWorks Advanced software machine version: Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Collision management Tooling set and parametric cones supplied Power and Motors Ciw9Riquj0 Voltage: 400 V Pluging: Three-phased Power: 17 Kw Motor: 18 CV Overall dimensions Lenght: 5412-5912 mm Width: 5120 mm Height: 2910 mm

Condition: good (used), Code: 0386 Brand: BIESSE Model: ROVER A 3.30 - CE Standard CNC 3-axis controlled boring/milling machining centre for the production of furniture, custom-made furniture, panels, general furniture, kitchens, bathrooms and various - CE Standard Technical data: Working range X Y mm 3060 x 1063 Working range Boring X Y mm 3060 x 1406 Working range Milling X Y mm 3060 x 1260 Workpiece passage mm 150 Axis Z stroke mm 200 Axis speed X/Y/Z mt/min 80/80/25 Gpdzx8 Composition: Boring head with 21 quick-connect spindles - Rotation speed up to 6000 rpm managed by inverter (n° 14 vertical spindles - n° 6 horizontal spindles) Electrospindle HSK F63 12 Kw 10-position automatic tool changer X-axis grooving blade unit - Diameter mm 120 N° 6 CTS bar-type work tables for rapid clamping of workpieces of any shape and size. Work table sliding system on linear guides and recirculating ball bearings Rear stops Side stops Bar lifters Vacuum pump 100 cubic metre Automatic lubrication system Integral protection of the operating unit and maximum visibility for working in total safety Hardware and Software PC-based XP600 control system: PC with real-time Windows operating system controlling the machine; real-time control of interpolating axes; input/output signal management; real-time execution of machine logic; total connectivity; bar code reader management; dedicated machine function enable buttons. The BiesseWorks graphic interface makes full use of the operating methods typical of the Windows operating system: assisted graphic editor used to program machining operations parametric programming and guided creation of parametric macros import of CAD and other external software files in DXF and CID3 format programming of the working area using set parameters Installed power Kw 17 Compressed air 7/8 bar Suction connection diameter mm 250 Overall dimensions of assembled machine mm 5085 x 3750 x 2000 h Weight kg 2800

Condition: used, Year of construction: 2003, BIESSE Rover 35 FT CNC-Machine Description Configuration S1 Working area X and Y: 3,685 x 1650 x 180 mm for milling Flat table 3-axis milling motor BH26 Drilling unit ISO-30 Tool holder system Beie8Lxdnc 7 position toolholder (next to milling motor) 15" Colour screen, in replacement of the standard screen Ethernet card for network connection. For numerical control NC 1000 Interface module DXF CID/3 CAM Module OPTIXIt (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2011, Working dimension X: 5.680 mm Working dimension Y: 1.320 mm Working dimension Z: 150 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: ISO 30 Tool changer positions: 24 Vertical drilling spindles: 14 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 10 Self-adjusting machine table: Yes Vacuum pump: Yes Capacity vacuum pump: 250 m³/h Safety device: Safety mat Chip conveyor: Yes Interface for .dxf data: Yes Three stop ranges: Yes Disc tool changer: Yes BIESSE Drilling aggregate BH 21 L: Yes Remote control: Yes Control cabinet cooling: Yes BIESSE Automatic machine table EPS: Yes Control: BIESSE XP 600 Software: BIESSE BIESSEWORKS ADVANCED Conformity marking: CE mark Cr9O7Q3Dji

Condition: used, XNC Numerical Control Working field in X axis mm 3400 Working range in Y axis mm 1300 Working stroke in Z axis mm 155 N ° 2 work fields Worktop with bars No. 8 manually adjustable bars for the suction cup support with work quota visualization display N ° 8 pneumatic bakelite bars for lifting the panel Gxc3Abe N ° 3 manually adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical 3-axis electrospindle, with automatic tool change, ISO 30 type cones, flange for use of aggregates Automatic tool change system with 7 positions positioned on the operating head Arrangement for C axis Boring head with 28 spindles arranged as follows: - N° 12 verticals in X axis - N° 16 vertical in Y axis - N° 8 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves Front protection and safety system with carpets Perimeter protection grids Motorized belt for chip evacuation Vacuum pump Installed power kW 20

Condition: like new (used), Year of construction: 2017, Work surface size: 5000x1600 8 bars with 4 carriages each with automatic positioning Uru0N3E22D No. 2 ES959 - HSK F63 air-cooled 13.2KW electrospindles Rpm: 24000 Electrospindle Stroke: 410mm Boring head: BHZ111F with: 12+4V 60mm; 6H 75mm; 1L 60mm; d10; 1.7kW Lub. Automatic Drilling unit stroke: 371mm Carriage edge tool magazine: 22 places Carriage edge magazine: 4 places Outside edge magazine: 2 places Aggregates: Aggre109(BRUSH); Aggre44(LAMA215); GROTEFELD (L_GROT, S_GROT) Devices: no. 2 x Agg117(edge ref, edge scraper, glue scraper); Aggre99(edge ref) Tools: right/left edger Vacuum pumps: no.1 brand Becker oil-bath vanes Axis lubrication: automatic

Condition: ready for operation (used), Technical characteristics 3-axis spindle, 11 kW, 1000 to 24000 rpm 10 Y / 10X vertical drilling unit 6 X / 2 Y horizontal drilling unit XNG digital control 8-position on-board tool loader + pick-up loader on frame Machine to be restarted dimension plan de travail en Y1640 mm Dimension plan de travail en X3430 mm B3Cq8Mngda Caractéristiques usinageDrilling unitOnboard tool chargerNesting table Power and Motors Overall dimensions

Year of construction: 2022, Condition: used, Machine/vehicle number: 1000055695, Abmessungen Arbeitstisch FT: X=3098 mm; X=2203 mm Pneumatische Referenzanschläge und Nullpunkte für den RECHTEN Bereich Vakuumsystem Mehrfachspannbereich mit 8 Bereiche Pendelbearbeitung für Maschine mit Zugang von 3 Flanken -CE 250 m³/h Vakuumpumpe mit Nocken 9.0 kW (12HP) Elektrospindel mit HSK F63, lufgekühlt Erweiterung für die Absaughaube mit 6 verschiedenen Positionen auf Z gesteuert durch CNC Voreinstellgerät für die Messung der Werkzeuglänge mit einem DM von bis zu 130 mm Gxc08H3 Flansch zur Vorbereitung einer Elektrospindel für die Verwendung eines Winkelaggregates Blasvorrichtung mit 4 Düsen Zusätzlicher Z-Achsenträger für vordere Bearbeitungseinheiten, mit pneum. Hub Bohrkopf BH 10 Satz von Horizontalbohrspindeln für Bohrkopf BG10 (Komplettkopf BH17L) Fester seitlicher Werkzeugwechsler Software: bSolid bNest -Softwaremodul für die Nesting Fertigung SOPHIA - IoT Connection Verstärkter Werkzeughalter 360° drehbare interpolierende Arbeitseinheit (C-Achse Torque) Winkelaggregat HSK F63´mit 1 Ausgang zum Fräsen oder Sägeblatt bis max. 180 mm, manuell dreh- u. schwenkbar Lagerort: Lieferant

Condition: used, Year of construction: 2003, BIESSE Rover 35 ATS CNC-Machine Configuration S2 Description Working area X and Y: 3,500 x 1650 x 180 mm for milling Traverse table with 6 supports with ATS system Belt conveyor for waste removal 7,5kW Electrospindle 12.000 r.p.m. with longe flange HSK63 4,0 kW - 180 mm indexed circular saw unit Device for the adjustment of the depth of vertical boring and routing operations on the upper side of the panel. Prearrangement for mechanical copying unit.Specify the position of the electrospindle to be prearranged Mechanical copying unit for floating tracing with HSK F63 connection - tool dia. 111 mm Ethernet card for network connection (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Bln0Vnzdehe Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2016, Working dimension X: 3.765 mm Working dimension Y: 1.875 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 16 Vertical drilling spindles: 20 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, in Y-direction Gantry machine: Yes Machine table: Matrix table Vacuum pump: Yes Capacity vacuum pump: 500 m³/h Workpiece probing: Yes Suitable for nesting: Yes Barcode reader: Yes Interface for .dxf data: Yes Electronic supervision of the end-position of the stops: Yes Disc tool changer: Yes BIESSE Drilling aggregate BH 20: Yes Milling spindle liquid-cooled: Yes Tool charge measurement: Yes Dpou9L Pendulum machining: Yes Automatic lubrication: Yes Barcode reader: Yes Remote control: Yes UPS - Uninterruptible Power Supply: Yes Software: BIESSE B_SOLID, BIESSE B_NEST

Condition: ready for operation (used), Year of construction: 2007, Make: BIESSE Model: ROVER A3.4 FT Year: 2007 Useful work area: 3.685 x 1.290 x 150 mm 1 Electrospindle milling machine 16 HP HSK-F63 1 Automatic 18-position rotary gearbox 1 Drilling comb with 14 vertical + 6 horizontal holes Centralized lubrication system, automatic 80Zcbso9Q 1 Vacuum pump 250 m3/h Software: BIESSE WORKS CE STANDARD

Condition: like new (used), Year of construction: 2010, Working range in X axis mm 3640 Working range in Y axis mm 1524 Working range in Z axis mm 150 Bar working table No. 6 manually adjustable bars for suction cup support No. 4 pneumatic Bakelite bars for lifting the panel No. 3 suction cups for each No. 1 HSD electrospindle KW 12 motor - Hsk coupling No. 12-position automatic tool change system - positioned on the machine head Boring head with spindles arranged as follows: - No. 7 vertical in X axis Urniji0Pj2 - No. 5 vertical in Y axis - No. 4 horizontal in X axis - No. 4 horizontal in Y axis Independent blade for making grooves in X axis Frontal belt protection and safety system Vacuum pump mc/h 250 Biesse Works software

Condition: like new (used), Year of construction: 2015, 3-axis machining center Technical data Working range X 6,400 mm Working range Y 1,500 mm Working range Z 1,500 mm Number of milling spindles 1 Main motor 13 kW Max rotational speed 24,000 rpm Tool clamping system HSK-F63 Tool change positions 8 Boring heads vert. 20 Bei0Vym Horizontal boring heads X 4 Horizontal boring heads Y 4 No.2 360 m³/h vacuum pumps Nesting Remote control BIESSE WORKS software Overall dimensions: 11004×5334 mm Weight 4900 kg

Condition: like new (used), Year of construction: 2016, 3-axis machining center Working range X 3,260 mm Working range Y 1,260 mm Working range Z 165 mm Number of milling spindles 1 Main motor 13.2 kW Max rotational speed 24,000 rpm HSK tool clamping system Tool change positions 16 Uq27Hc7Xpt Vertical boring heads 10 Horizontal boring heads X 4 Horizontal boring bits Y 2 X groove blade Bar worktable Number of bars 6 Vacuum pump 245 m³/h Total power 15.88 kW Weight approx. 2,400 kg