Used Biesse Techno Fdt for sale (323)

Condition: used, machine/vehicle number: 007189, Position 1: Automatic Drilling Machine BIESSE-TECHNO FDT Neljtvrdvohccqmjcr

Condition: excellent (used), Automatic through-feed ELECTRONIC Drilling LINE (CNC controlled): W05022F) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - N° 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - N° 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) - N° 3 top vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) - N° 5 top pressing devices + N° 2 endless screws to evacuate the wastes. With CNC NC 500 (Software Tooling System + Woodmaster) Nolhot Ig A Ssccqmecr W05022G) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) - No. 3 top vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) - No. 5 top pressing devices + N° 2 endless screws to evacuate the wastes. 2nd Drilling Machine connected to the NC of the 1st Machine

Year of construction: 2004, Condition: excellent (used), I sell the throughfeed drilling machine with BIESSE TECHNO FDT. Year 2004 Working area: Nelsi U Apmehccqmjcr X: 215 - 32.000 mm Y: max. 672 mm (horizontal spindles 24 pcs. per 32mm offset) Z: Workpiece thickness: 9 - 65 mm min. X middle distance between vertical units: 96 mm Configuration: 4+4 motors from under 1 bottom jumping milling unit 1+1 motors from sides per 24 spindles / 32mm 0 motors from back 4+4 motors from top 4 pcs. material pressure from top Very good condition. Available immediately. One more BIESSE TECHNO FDT in different configuration available from line. Price on agreement.

Condition: used, machine/vehicle number: 006733, Max. panel width: 3200 mm Max. panel length: 1200 mm No of Bottom Units: 6 No of Top Units: 3 Njlheu N Skleccqmscr Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: excellent (used), Numerical Control Type NC 400 (Software) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Ncelhccegk T Ttjqmor Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 48 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: used, machine/vehicle number: 007683, Max. panel width: 3200 mm Max. panel length: 900 mm No of Bottom Units: 5 No of Top Units: 3 Positioning of Units by NC: yes Lateral horizontal groups: yes Njlhccqovxxu Semscr

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 Feeding speed (m/min) 35 - 75 (ca.) Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 Bottom vertical units/supports (No.) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 Top vertical units/supports (No.) 3 Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (No.) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 46.5 The CNC controls the movement (X axe) of the mobile horizontal unit Ncslsd Rl Hcjhccqmsr The CNC controls the movement (Y axe) of the reference stops

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" Ncolhccjcr U Urjqmer And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min Nelhod Nviqsccqmscr - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Ncjlhcslwqrtjcqmer Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: excellent (used), Automatic through-feed ELECTRONIC Drilling LINE (CNC controlled): Also for NARROW PIECES (min. mm 100). W05024F) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - N° 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.5 each), - N° 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) - N° 4 top vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) - N° 6 top pressing devices + N° 2 endless screws to evacuate the wastes. With CNC - PC DESK TOP (Modul Editor) - software Tooling System W05024G) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.5 each), - No. 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) - No. 3 top vertical units (each with 2 drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + N° 2 endless screws to evacuate the wastes. Ncslsu Tp Sljhccqmsr 2nd Drilling Machine connected to the NC of the 1st Machine

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: KZ0040) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer KZ0041) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - N° 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - N° 7 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - N° 4 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - N° 5 top pressing devices + N° 2 endless screws to evacuate the wastes. With CNC NC 500 (Software Tooling System + Woodmaster) KZ0042) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 5 top pressing devices + N° 2 endless screws to evacuate the wastes. Ncelhccoh Icm Uoqmor KZ0043) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. KZ0044) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit Njlhccsidqd Tsqmecr The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Nslhccqoidqf Rjmscr No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. N. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 x HP 1,8 Max. working width (mm) 3200 - Min. working width (mm) 215 Nelhohvi Dueccqmecr N. 7 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 5 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° Njlhsdfgg Ijccqmocr C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: excellent (used), Numerical Control Type NC 400 (with work cycle management software) Through-feed motorized conveyoring belts (No.) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 No. 4 Bottom vertical units/supports Nelei D D Tfehccqmjcr Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 25 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops OPTION: Front feed hopper/loader (for narrow pieces: Min 60mm - Max 260mm)

Condition: excellent (used), AUTOMATIC Drilling and Dowels inserting LINE (2 machines): W12054A) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), Njlhjvnq Txjccqmjcr - No. 5 bottom vertical units (each with 2 swivelling drilling heads at various spindles, HP 2.3 ea) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 5 top pressing devices - No. 2 endless screws to evacuate the wastes. With NC (software Modul Tooling System) to control, manage and run the 2 machines of this line W12054B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 8 inserting nozzles, such as Glue injectors and dowel drivers) - No. 3 bottom units (each with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 3 Top pressing devices - No. 2 endless screws to evacuate the wastes.

Condition: excellent (used), FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling. also for NARROW PIECES (min. mm 65). With 3 full-CN drilling machines (1 for side-drilling on lenghtwise) and 1 Splitter Composed of the following machines: W05024A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C W05024B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024D) 1st 90° Turning device "RBO (BIESSE)" Mod. GPK-1 (Lengthwise to Crosswise) W05024E) Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB2 / 11.0 W05024F) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024G) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024H) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (Crosswise to Lengthwise) Nolhcotr Envocqmocr W05024I) Multi-Borer, with CN "BIESSE" Mod. Techno FDT (side-drilling on lenghtwise) W05024J) Splitting Saw (Splitter) Lengthwise "TECNOLOGICA" W05024K) Brush-cleaning machine "WANDRES" W05024L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner S

Condition: used, machine/vehicle number: 007308, Max. panel width: 3200 mm Max. panel length: 1000 mm Nslhcouwzuvjcqmecr No of injectors: 12

Condition: used, Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 90571, working width: 3,200 mm, No reserve price - guaranteed sale to the highest bidder! The machine had been out of service for 8 years and required maintenance (cleaning, lubrication, greasing, etc.) before being put into operation. Accordingly, the machine had been in production for 17 years. TECHNICAL DETAILS Working width: 220 - 3,200 mm Ncslhccqov Uqaxomor Drilling units Floor units: 6 units with 2 drilling heads each (2 x 11 spindles) Spindles per floor unit: 22 Total number of floor spindles: 132 Upper units: 2 units with 2 drilling heads each (2 x 11 spindles) Spindles per upper unit: 22 Total number of upper spindles: 44 Horizontal units: 2 units Clamps and removal Upper pressure clamps: 4 units Motorized endless screws for chip removal: 2 units MACHINE DETAILS Power: 37.3 kW Voltage: 380 V Current: 7 A Frequency: 50 Hz EQUIPMENT - Electronic programming device RT 483 - Each drilling head is rotatable - Through-feed motorized Conveyor belts with adjustable speed - Extra unit for automatic feeding of small panels

Condition: excellent (used), Electronic programmer RT 483 No. 2 Through- feed motorized conveyoring belts Feeding speed (55 m/min ca.) No. 2 Horizontal units/supports No. 1 Drilling heads for each horizontal unit/support (1 x HP 1,5) No. 20 Spindles for each horizontal drilling head Max. working width (mm) 3200 Ncolhccofz Nansqmer Min. working width (mm) 220 No. 7 Bottom vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Top vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Vertical top pressure clamps No. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display Total power installed (Kw) 35,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: used, machine/vehicle number: 006163, Max. panel width: 3200 mm Ncsloiwpt Uohccqmjr No of Bottom Units: 3 No of injectors: 6

Condition: excellent (used), Double-side working machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting Ncjlsdi R R Rshccqmsr Electronic Programmer RT 486 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) No. 6 Left-side + No. 6 Right-side Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Bottom vertical units/supports (N°) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Total installed power (Kw) 11,5

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: Nelhccoh T Dvtsqmocr KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.