11
Dowel drilling machine
Stegherr FD
Year of construction 1992
Engine 2.2kW
5Amp, 400V
Extraction diameter 80mm
Drills 6-16mm
max. drilling stroke 80mm
Uubdj9g
1
No. 12
used, good condition
suitable for Scheer
Number 5 pieces
B07otjjczk
Diameter 14 mm
1 x right 45 mm / 1 x left 45 mm
2 x left 65 mm / 1 x right 75 mm
Usable length approx. 45 mm x 2/65 mm x 3
Total length approx. 80 mm x 2/110 mm x 3
Internal thread M 10
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
1
- Tischabmessung 400 x 150 mm
- Drehzahl 1400 U/min.
- 230 Volt
- max. Stemmtiefe 76 mm
- präzise einstellbare Schwalbenschwanzführungen zum passgenauen Stemmen von Rechteckslöchern
- ideal zum Herstellen von Zapfenverbindungen in Hart- und Weichholz
- verstellbare Anschläge zum wiederholgenauen Stemmen
- groß dimensionierte Handräder zum einfachen Einstellen des Koordinatentisches
- praktische Einhandbedienung mit Kraftunterstützung durch Gasdruckzylinder
- 2x Werkstück - Exzenternieder...
13
SCHLEICHER Drilling machine for sale!
With this machine you can drill different holes at the same time from different sizes.
Cacxpw30t3
The different drills are included.
6
On offer:
A chain mortiser
Brand: SCM
Type: OM Minor
Fk9nxxf
Weight: 175 kg
Maximum drilling depth: 180 mm
The machine is loaded by us on the truck.
If you have any questions, please feel free to contact us!
4
- Lock case mortiser
- Forend milling
- Handle + keyhole in one clamping
Pwufne
9
Dowel Drill
Select 31300
Drill motor 1.1kW
Drill head 360° rotatable and interchangeable
Adjustable drilling depth 0-80mm
with standard 3 spindle drill chuck
Jad3bqrey
BJ unknown
2
No. 11
used, good condition
suitable for Scheer
Number 18 pieces, 10 x right, 8 x left
Diameter 9 mm
G0utodn
Usable length approx. 45 mm
Total length approx. 80 mm
Internal thread M 10
HM
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
6
Technische Daten: -Bohreinheit mit pneumatik Vorschub
-3-Spindelbohrkopf 48/6 mm (Teilung nach Scharniermuster)
-Einpressmatritze (nach Scharniermuster)
-Lochreihenbohrkopf 13-Spindeln, Teilung 32 mm
-2 Niederhalter pneumatisch
-2 m Anschlaglineal mit Klappanschlag links und rechts
F9yhuod
-Tischgröße 710 x 350 mm
-Motor 0,75 kW / 230 V / 50 Hz
-Drehzahl 3450 Upm
-Druckluft 8 bar
-Absaugstutzen Durchmesser 100 mm
-Abmessungen L=735, B=570, H=935 mm
-Gewicht 100 kg
4
0.37 kW motor
a stroke of 7.5 cm
Very good condition.
Bloggf9i
7
Code: 0074
Brand: MASTERWOOD
Model: FA/1-A
Automatic drilling and screwing machine for anuba hinges
Technical data:
Screwing spindle motor Hp 1 - Screwing spindle rotation 420 rpm
Drilling spindle motor Hp 0,5 - Drilling spindle rotation 7000
Head unit tilting 15-0-60°
Stq3pc
Max drilling depth mm 90
Max drilling centre distance mm 2300
Min drilling center distance mm 150
Max lenght mm 3100
Working time for 3 anuba hinges : 30 seconds
Overall dimensions: mm 3400 x 880 x 2000 h
Weight...
5
-NEW-
Make Ganner Gannomat
Type SELEKTA 253
220 V, 1 pH, 50 Hz in standard version with:
-fully automatic electronic control with program selector
Flushing adhesives GLUES/driving
-Anchors drawer via electronic vibration conveyor with potentiometer
to the continuous adjustment of the anchor support performance
-Automatic Duebelldurchmesser and dowel length control with
Auto-DL select System (automatic ejection of incorrect dowel lengths
+/-5 mm in the Auffangbehaelnis)
-Closed system of glue wit...
11
COMEC machine for shortening and drilling with feeder
23eq0n
FORATRICE - TRONCATRICE
FMIOV-2200-ZUT-8UFCA2V30
Year of manufacture -2004
3
Handle
second hand
Bq3xt7rgyp
Ayen make
Type RPM 1.5 / 4
Machine no. 711630
Number of spindles 3 pieces
Drilling beam / drilling head 1 piece
Drilling depth 100/150 mm
Drill holder M10
Total connected load 1.1 kW
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
5
1000mm max length capcity
Equipped with
3 x Adjustable horizontal boring heads x 2.2kw [ 2 x 3 spindle, 1 x 1 spindle ]
Pneumatic workpiece clamping
Year - 1997 CE
Nilaf
5
horizontal
1,5 kW
In very good condition.
Bkltjacsu
4
Electro-pneumatic drilling machine SCHEER type BM 340,
motor: 1,1 kW // 2.700 rpm,
Bard7lc9rv
foot operation.
New and used tools like planer heads, cutters and much more, as well as accessories can be found on our homepage.
Visit us, call us or send us a non-binding inquiry.
7
machine type SM
control of working cycle by means of pneumatic pedal
spot drilling
oscillating drilling
maximum hole width 120 mm
adjustable oscillation speed
Adjustable table angle 15-0-15*
dimensions of table 440 x 230 mm
machine dimensions 850 x 800 x 1100 mm
machine weight 310 kg
F8qs9ajuy
4
- working length (mm): 3200
- drilling units: 3 from below with 3-spindle drilling head
- Hold down: 2 from above
- pressure cylinder: 1 from the side
Wlsj37at
- control: Siemens of newer construction
3
second hand
Ayen make
Ygnus
Type RPM 1 P
Machine no. 670097
Number of spindles 3 pieces
Drilling beam / drilling head 1 piece
Drilling depth 100 mm
Drill holder M10
Total connected load 0.73 kW
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
3
Through feed vertical and horizontal panel borer
Max panel width 2300mm
Max panel thickness 50mm
Equipped with
2 x Horizontal boring units [ left and right ] with 21 spindles at 32mm centres
6 x Bottom vertical boring units with split heads [ all 32mm centre distance unless stated ]
Head 1 - 2 x 11 spindles
Head 2 - 1 x 11 spindles and 1 x 7 spindle special centres aggregate
Head 3 - 2 x 11 spindles
Head 4 - 1 x 11 spindles 1 x empty
B2ryd3t0
Head 5 - 2 x 11 spindles
Head 6 - 2 x 11 spindle...
5
Special drilling and routing machine WEEKE
73yx8mbmy
for automatic universal drilling and end routing of furniture parts, small parts,
handles, for bed frame,
1. drilling machine Weeke
machine-no. 379
2 motors drilling horizontal from backside
2 motors drilling vertical from bottom
1 motor with 3 drills angular from backside
with magazin
different settings for drilling possible
2. routing machine Weeke
machine-no. 388
with converter
right and left each side 1 router
working width max. 800...
2
Technical details on demand.
Buopquy3z8
1
Dowel Ø 8 mm
Dowel length 25 - 50 mm
Compressed air connection 6 bar
1 stainless steel container for 5 kg glue
1 stainless steel container for 5 l water
Bxi0zcmeln
4 rollers for pushing the machine
Weight approx. 110 kg
Modular drilling machine GOMAD WU 2 C 2 G 2 T 2020 new machine
Location
Gorzów Wlkp.
Conditions of delivery
OWN COLLECTION
Cost of delivery
Customer cover
Startup Type
to be agreed
Description
Comments
Double-sided WU multi-spindle drills are designed for making holes for dowels in wood, chipboard and wood-based materials.
The WU drill has three drilling units - two vertical and one horizontal side, which allows drilling three rows of holes simultaneously.
Cqu2egkl3
WU
Number of drilling...
3
used
manufactured by Haffner
drill head 1 piece
number of spindles 3 piece
motor 380 V
Lbvsubix
drilling from rear
required space ca. l x w x h mm
700 x 700 x 1200
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck -
7
Oscillator
for shutters
Very good condition.
Bhqy78vumu
15
CNC machinery for drilling and inserting hardware for sashes and fronts.
Machining from below.
Workable panel dimensions
Max. mm. 2500 x 700 x 50 (h)
Biyiun8lq7
Min. mm. 250 x 130 x 13 (h)
Lower operating head consisting of:
- Nr. 1 drilling unit with 8 independent spindles ( 5 in Y - 3 in X ) - POINT-POINT.
- Nr. 1 boring group with 3 drills for hinges
The operating head is controlled by NC in its transverse movements along the Y axis and vertical movements along the Z axis.
Hinge insertion uni...
I sell the Biesse line consisting of:
COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line
Jvafz3
Manufacture year 1999-2001.
Possible to sell the machines separately.
Vibration loaders and conveyors on agreement.
For more photos and details please send the request.
5
Model: DB 123
- 3 spindles
-distance between spindles 16mm
-pneumatic pressure of the material
-pneumatic extension of the spindle
Bx07ksoxuw
- drill height adjustment
Used Other
Search Machineseeker now with more than 200,000 used machines:This may be of interest to you
How to receive 100% of our e-mails
Photo gallery: The World's 10 biggest excavators
Morlock Motors official partner of Machineseeker and Truckscout24
Sample sales contract for used machines in nine languages
Machineseeker still biggest sponsors of 2nd German football league
10 valuable tricks for buying used machines online
