Used Drives for sale (22,016)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, shelf height: 7,200 mm, load capacity per storage section: 2,000 kg, TECHNICAL DETAILS General Information Manufacturer: BÖCKELT Model: TOWER Year of Construction: 2017 Racking System Number of Racking Bays: 41 Racking Height: 7.20 m Maximum Bay Load: 38 t Maximum Load per Level: 2,000 kg Shelves and Storage Dimensions Shelf External Dimensions: 3,340 × 1,600 × 90 mm Additional Loading Height: 60 mm or 160 mm Drawer Internal Dimensions: for panel format 3,000 × 1,500 mm Maximum Weight of Loaded Shelf: 2,300 kg Automated Narrow Aisle Trucks Number: 2 Manufacturer/Model: MLR Mayesto 2.3 Design: Automated narrow aisle trucks with reinforced lifting mast Load Capacity per Vehicle: 2,300 kg up to 4,500 mm lifting height Residual Load Capacity per Vehicle: 2,000 kg up to 7,500 mm lifting height Truck Load Capacity: 2,000 kg at 7,500 mm lifting height per vehicle Travel Speeds Forward/Reverse Travel: max. 1.6 m/s Curve Travel: 0.3 m/s Positioning Travel: 0.1 m/s Battery and Charging Technology Battery Voltage: 80 V Battery Capacity: 930 Ah Charger: on-board Automatic Recharge: via sliding conductors in 3 horizontal aisles Safety and Detection Technology Laser Scanner: SICK, front and rear Software and Control System Control System: MLR LogOS-FTS Operation: fully automatic Visualization: graphic and tabular EQUIPMENT Complete software for fully automatic system operation 41 racking bays 2 automated MLR Mayesto 2.3 narrow aisle trucks Reinforced lifting masts Telescopic forks that can extend on both sides Fode Aay Dwjpfx Am Eegi Multi-level telescopic table SICK laser scanners, front and rear On-board charger Automatic recharge via sliding conductors Shelves with aluminum panels Transport order management Vehicle dispatch Storage location management User management Error and signal management Statistics Energy monitoring

Condition: excellent (used), Year of construction: 2014, Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Manufacturer: PIV Drives, gearbox type D-315-22H -Translation: 34.726 :1 -Motor: without electric motor (can be supplied at extra cost) Fodpfx Aovxq Nusm Eegi -Input- shaft: Ø 60 x 140 mm -Output hollow shaft: Ø 160 x 500 mm -Dimensions: 720/1300/H725 mm -Weight: 1321 kg

Condition: used, Year of construction: 2013, functionality: fully functional, roll diameter: 50 mm, roll width: 595 mm, total width: 650 mm, total length: 33,500 mm, conveying length: 33,500 mm, roll spacing: 50 mm, axle spacing: 100 mm, frame height: 120 mm, Roller Conveyor / Rollers / Powered Conveyor Condition: Used Model: Drive type: Flat belt Year of manufacture: 2013 Total length: approx. 33,500 mm - Consists of 12 sections: 1x approx. 1,500 mm, 1x approx. 2,000 mm, 10x approx. 3,000 mm - Forms 4 different conveyor lines: 1x 6,500 mm, 3x 9,000 mm Overall width: approx. 650 mm Conveying width: approx. 595 mm Roller diameter: approx. 50 mm Roller pitch / axle spacing: approx. 50mm / 100mm Material: Steel Frame height: approx. 120 mm Frame depth: approx. 25 mm Color: green Including SEW motor (0.25 kW) Price per meter Support legs to be ordered separately Internal article number: 2026021101 The conveyor system was operational until disassembly. Thanks to the excellent workmanship, your material will move smoothly to its destination, even under heavy load. Tailor-made solutions for your intralogistics Whether you need roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading goods, we are your experienced partner! We are happy to prepare a customized offer or advise you on planning and installation queries. Simply tell us your requirements and local conditions. Fgedpfx Ams Aicy Ej Esi Benefit from our many years of experience and our extensive network of experts. We have successfully completed projects in various industries including logistics, the pharmaceutical sector, trades, and electronics. Together, we will work out ways to optimize your workflow and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting systems or supplementary components such as order picking racks or bins. Features: Condition: fully functional, with signs of use Ideal for fast material handling Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: like new (used), Year of construction: 2021, Rotary welding drive for sale Sale only within EU member states! Fodez Rx N Uopfx Am Esgi No private sales. MAE can be inspected upon request. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, 80 Braking Resistors ELECTRONICS / PLC Control Manufacturer: LTi DRIVES Type: BR-090.03.540-UR 750V DC 300W Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Fedpfozu A Svsx Am Eegi

Condition: used, SHI Machines Type: BlueBox As good as new, with only 250 operating hours! Technical data: Power: 120 kW Fedpfxey Tg R Nj Am Ejgi Torque: up to 470 Nm Speed: up to 6,000 rpm Operation: Four-quadrant operation Safety package: Bulletproof cover & data filter for "Go" signal line Dimensions: approx. 2800 × 1600 × 1300 mm Accessories, etc.: 1 clutch 120 - steel, incl. adapter Clutch size: 100 Max. speed: 7,300 RPM Max. torque: 1,000 Nm 1x adapter 1x clutch steel size 100 1x adapter 2 ø40 1x adapter 2 ø50 1x adapter 2 ø60 1x clamping device ø40 1x clamping device ø50 1x clamping device ø60 Adapter mounting tool Clutch 120 - CFRP, incl. adapter Max. speed: 8,500 RPM Max. torque: 720 Nm Adapter mounting tool CISPR 25 test table made of wood on wheels for EMC BlueBox 120, size 2500 x 1000 x 900 mm Loadable up to max. 500 kg, incl. 2 mm hot-dip galvanized ground plane Payload: up to 1,400 kg Weight: approx. 2,500 kg Operating voltage 400 V, 250 A Control voltage 24 V Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, machine/vehicle number: 9G500208, fuel type: diesel, motor manufacturer: Caterpillar 3512B, Year of manufacture: 2026 Field of application: Construction Empty weight: 14.250 kg Generator capacity: 1.421 kVA Fsdpfxjzhzw Do Am Esgi Dimensions of cargo space: 605 x 266 x 232 cm Generator: Caterpillar SR500 Frequency: 60 Voltage: 600 Please contact Team DPX for more information

Condition: like new (used), Year of construction: 2019, Sundyne HMD Kontro 1.5x1x6 Sealless Magnetic Drive Centrifugal Pump Sundyne HMD Kontro magnetic-drive centrifugal pump for industrial process and fluid-transfer applications. The sealless magnetic-drive design is intended for applications where minimising the risk of process-fluid leakage is important. Technical details - Manufacturer: Sundyne HMD Kontro - Type: Magnetic-drive centrifugal pump - Size: 1.5 × 1 × 6 - Material of construction: 316L - Condition: Brand New Suitable for consideration by chemical, pharmaceutical and general process industries, subject to the specific liquid, temperature, pressure and materials requirements. Sale details - Equipment available from Ireland - International enquiries welcome - Price: On request Fedpfx Ao Ad N Awem Ejgi - Inspection and additional photographs available on request Please enquire for the full specification, condition report and quotation.

Condition: used, Rotary accumulation table Ø 1,000 mm with drive head and adjustable-speed gear motor. The motor drives both the rotary table and the conveyor chain. Direction: CW (clockwise). Fgodpo Aikpijfx Am Eji

Condition: used, InnoMa BÖA-48 Hydraulic Power Unit For sale is an InnoMa System BÖA-48 hydraulic power unit with an engine output of 18.5 kW, a flow rate of 75 liters per minute, and a maximum operating pressure of 145 bar. This hydraulic drive unit features a 250-liter tank and is suitable for providing hydraulic power to various industrial machines and systems. Fsdpfxsz H Ugtj Am Eegi The hydraulic power unit is suitable, among other applications, for powering: Industrial machines and production systems Hydraulic drive systems Mechanical engineering and automation systems Hydraulic control and drive units Technical specifications: Manufacturer: InnoMa System GmbH Designation: Drive unit BÖA-48 Year of manufacture: 03/2007 Power: 18.5 kW Speed: 1,470 rpm Tank volume: 250 liters Flow rate: 75 l/min Maximum pressure: 145 bar Hydraulic oil: HLP 46 Oil capacity: approx. 215 liters Wiring diagram number: 102607 InnoMa 200251

Condition: excellent (used), Year of construction: 2023, operating hours: 1,087 h, functionality: fully functional, machine/vehicle number: API474668, power: 26 kW (35.35 HP), Atlas Copco GA 26 VSD FF Rotary Screw Compressor Year 2023 For sale is a highly efficient variable speed driven premium screw compressor of the latest generation: Atlas Copco GA 26 VSDs FF with integrated refrigerant dryer (Full Feature). The machine was manufactured in 2023 and has an extremely low operating history of just 1087 running hours. Technically the compressor is in absolute 1A top condition and ready for immediate operation. Thanks to the state of the art VSDs variable speed technology the unit adapts flexibly and precisely to your actual compressed air demand. This ensures maximum energy efficiency and drastically reduces operating costs. With the integrated Full Feature equipment including a built in refrigerant dryer the system delivers dry and clean compressed air directly requiring a minimal footprint. Fgodez Sqa Uepfx Am Eji Condition of the machine: Technical: 1A Top Condition. Runs perfectly, reliably, and without any maintenance backlog. Optical: The housing shows some cosmetic dents and scratches (see photos). These are purely transport related cosmetic imperfections. The flawless function, safety, and lifespan of the unit are in no way affected. Technical Data: Manufacturer: Atlas Copco Model: GA 26 VSDs FF with integrated refrigerant dryer Serial Number: API474688 Year of Manufacture: 2023 Operating Hours: 1087 h Motor Power: 26 kW (35 hp) Motor Speed: 5050 rpm Maximum Working Pressure: 10.25 bar Free Air Delivery at maximum pressure: 5.8 m3/min (96.5 l/s) Regulating Range Free Air Delivery: continuously variable from 0.95 to 5.88 m3/min Noise Level: 66 dB(A) Dimensions: Length 1330 mm, Width 870 mm, Height 1725 mm Weight: 604 kg Electrical Connection: 400 V, 50 Hz, 3 Phases Country of Origin: Belgium

Condition: good (used), Year of construction: 2012, Approx. 170 units, pneumatic drive, spool valve, M&S, PAMS1 – used: Price per unit, ex works: €300.00 (net)! Manufacturer: M&S Type: PAMS1 Fgjdpjz Sdyijfx Am Eoi Year of manufacture: 2012 Spring (normally closed) Operating pressure: 4.8 - 8 bar Air consumption: 1.2 – 2 L/stroke Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: used, operating hours: 88 h, fuel type: electric, Year of manufacture: 2021 Fedpe Adnrdefx Am Eogi Drive: Wheel Working height: 780 cm Surface type: Slab Please contact Kristoff Van Havere for more information

Condition: good (used), Year of construction: 2022, Pallet racking system, Still, approx. 5,625 storage locations, 1 ton/pallet - used: Price ex works: €85,000 (net), disassembled, packaged, and loaded! Manufacturer: Still Type: Pallet racking system Year of manufacture: 2022 Support type: P3 Load handling equipment, pallet racking, Euro pallet: Fsds Agu H Iopfx Am Eegi B1: 800 mm / L1: 1,200 mm / H1: 1600 mm Qmax: 1,000 kg Clear width between the outer support frames: 1.25m / inner 1m Block 1: Depth: approx. 7,250 mm Height: 9,050 mm (top of brace 9,115 mm) Width: 6,300 mm 4 racking aisles 5 storage levels (incl. floor) Shelf height: approx. 1.70 m Storage locations: 9 pallets in a row x 4 aisles x 5 levels: 180 pallets Block 2 + 5: Depth: approx. 7,250 mm Height: 9,050 mm (top of brace 9,115 mm) Width: 47,340 mm 31 racking aisles 5 storage levels (incl. floor) Shelf height: approx. 1.70 m Storage locations: 9 pallets in a row x 31 aisles x 5 levels: 1,395 pallets per block x 2 = 2,790 pallet locations Block 3 + 6: Depth: approx. 7,250 mm Height: 9,050 mm (top of brace 9,115 mm) Width: 42,780 mm 28 racking aisles 5 storage levels (incl. floor) Shelf height: approx. 1.70 m Storage locations: 9 pallets in a row x 28 aisles x 5 levels: 1,260 pallets per block x 2 = 2,520 pallet locations Block 4 Depth: approx. 7,250 mm Height: 9,050 mm (top of brace 9,115 mm) Width: 42,780 mm 3 racking aisles 5 storage levels (incl. floor) Shelf height: approx. 1.70 m Storage locations: 9 pallets in a row x 3 aisles x 5 levels: 135 pallets per block Condition: good Available: immediately (still needs to be disassembled) Location: 47533 Kleve More photos to follow!

Condition: used, operating hours: 118 h, fuel type: electric, Year of manufacture: 2021 Drive: Wheel Lifting capacity: 227 kg Working height: 780 cm Fodpo Adnq Hefx Am Eegi Surface type: Slab Please contact Kristoff Van Havere for more information

Condition: excellent (used), ///// PRICE INDICATED IS FOR 1 UNIT ///// Manufacturer: ALGRA Type / designations: D3A030012 D3A030011/6-3 23-1151-012 I offer ALGRA drive gearboxes used in metalworking machine tools. These components serve the function of power transmission and feed rate adjustment, and are most commonly used in: conventional milling machines machining centers industrial machines as drive modules Robust, heavy-duty construction – typical components for continuous operation in industry. ⚙️ Technical condition Condition: used Shows normal signs of use Mechanically complete Knobs and mechanisms are functional Possible signs of storage 📦 Included ALGRA gearbox (exactly as shown in the pictures) 📏 Application drive for axis feed (X/Y/Z) drive systems for machine tools spare parts for milling machines and industrial machines maintenance / servicing of machines ℹ️ Additional information Markings stamped on the housings (visible in the pictures) Inspection labels "QS-IN PRÜFUNG" Fsdpfx Amoz Smp Ts Eegi Oil-lubricated construction (closed gearbox) Individual sale possible 🚚 Shipping Shipping by courier or on a pallet Personal collection possible

Condition: used, Drive motor: BAUMÜLLER Main spindle motor: DC shunt motor, servo motor Permanent magnet DC servo motor, type GNAF 112 LV Serial no.: 843016 Year of manufacture: approx. 1985 Rated power: 20 kW Operating voltage: 400 VDC Rated current: 56 A Maximum speed: 3000 rpm Excitation voltage: 310 VDC Excitation current: 1.8 A Tacho: Baumüller, type GHT 68/22 Tacho voltage: 20 V / 1000 rpm Tacho current: 5 mA Max. 8000 rpm - Flange connection for cooling fan Shaft diameter: 28 mm (shaft with 8 mm keyway) Shaft length: approx. 55 mm (shaft projection from centering edge) Fgsdpe Ah Ignefx Am Eoi Centering diameter: 180 mm, 4 mm height Bolt circle diameter: 215 mm, 4x 14 mm holes Overall length: 620 mm (without shaft and centering flange) Overall dimensions L x W x H: 700 x 225 x 225 mm Weight: 100 kg Good condition Suitable cooling fan available in the shop under stock number 55670.

Condition: excellent (used), For sale: Constantin Hang 103 LOK die-cutting machine, a product from a renowned German manufacturer. This device is designed for the precise die-cutting of paper, cardboard, leather, felt, rubber, and other soft materials. The machine is equipped with an electric drive, foot pedal control, and a robust work table with a material guide, ensuring comfortable and precise operation. Thanks to its robust construction, the device is characterized by high durability and reliability. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: 103 LOK Machine number (Serial no.): 9578 Type: die-cutting machine Drive: electric Fgsdsz Sm T Sjpfx Am Eei Control: foot pedal Motor: Georgii KRD 328 Power supply: 220/380 V Motor power: 240 W Frequency: 50 Hz Motor speed: 680 rpm Work table with guide Robust steel construction Condition: Used. Functional. Shows normal signs of wear and tear due to age and use. Visual condition consistent with the photos.

Condition: excellent (used), For sale: 2 complete ABB ACS880 Multidrive systems, consisting of a total of 18 electrical cabinets (9 cabinets per system). These industrial drive systems originate from a former steel production facility in the Netherlands and are reported to have been in operation for approximately one year only. Both installations are offered as complete systems, including ABB inverter modules, supply/rectifier modules, main circuit breakers, control electronics, copper busbars, and associated electrical components. Main Components 10 × ABB ACS880-104-0600A-7 – Inverter Modules 8 × ABB ACS880-304-0820A-7 – Supply / Rectifier Modules 4 × ABB SACE Emax2 E2.2S 1600A – Main Circuit Breakers Additional Equipment Extensive copper busbar systems ABB control and protection electronics Electrical control components Contactors, relays, and circuit protection devices Internal power and control wiring Cooling and ventilation equipment Heavy-duty industrial electrical cabinets System Details Fgedo Agfnpspfx Am Esi Manufacturer: ABB Series: ACS880 Multidrive Quantity: 2 complete systems Total cabinets: 18 (9 per system) Condition: Used – visually in good condition Previous application: Industrial steel production Operating history: Reportedly approximately 1 year Documentation: Technical drawings available Location: Rotterdam, The Netherlands Availability: Immediately available from stock Additional Information The ABB ACS880 Multidrive series is designed for demanding industrial applications requiring multiple motor drives, centralized power supply, and advanced motor control. These installations may be of interest for industrial reuse, system integration, drive refurbishment, or recovery of valuable ABB components. Both systems are currently stored at our warehouse in Rotterdam and are available for inspection by appointment. Complete systems preferred – sale as one lot. Additional photographs, component details, and technical drawings are available upon request. Terms of sale: EXW Rotterdam, The Netherlands. Surplus equipment sold as is, where is, without warranty, claims, or returns.

Condition: used, functionality: unexamined, Ferwood Code: RU0012022 - Manufacturer Code: HMS01.1N-W0036-A-07-NNNN - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - WEEKE - If interested, we offer an overhaul service; please contact us. Fgjdpfxe Ah Ht Aj Am Eoi

Year of construction: 2017, condition: new, For sale: ABB ACS880 industrial frequency converter, brand new and unused, supplied in original ABB packaging. 5 units available – sold individually. Technical specifications: Fgjdpfx Amo Ahd U Ro Eoi * Manufacturer: ABB * Model: ACS880-01-061A-3+E200 * Supply voltage: 3-phase, 400 V AC * Rated output current: 61 A * Protection class: IP21 * Year: 2017 * Condition: New, unused, in original box Included: * ABB ACS880 frequency converter * Original ABB packaging * Control panel * Original documentation * Factory test report Location: Rotterdam, The Netherlands Delivery: EXW Rotterdam Worldwide shipping available upon request. Sold as is, where is, without warranty or returns.

Condition: ready for operation (used), L&Z Lathe / WEILER COMMODOR B incl. Heidenhain Digital Readout -GS designation -3-axis digital Heidenhain control -Year of manufacture 1991 -Center height 180mm -Swinging diameter over bed 330mm -Distance between centers 1000mm -Spindle bore 56mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal/crossfeed -Threading / Metric / Inch / Module etc. -Multifix base and inserts -Chuck guard -2 x EMERGENCY STOP -3-jaw chuck -Chip guard -Well-maintained, good overall condition Fsdpfx Aez Hxm Dsm Ejgi -Machine feet -Documentation Dimensions: 2.5 x 1.3 x 1.7 meters / Weight 1500 kg Errors and omissions excepted

Condition: like new (used), Year of construction: 2022, operating hours: 11,500 h, INVERTER COMPRESSOR GA 75 VSD, IN LIKE-NEW CONDITION (WE ARE AN OFFICIAL DEALER). NEW UNIT LIST PRICE: EUR 96,968. MAIN FEATURES: MAXIMUM PRESSURE: 13 BAR Fgedpfx Amszdf U To Eji POWER: 75 kW / 100 HP FLOW RATE: 13,500 LITERS/MINUTE

Condition: good (used), Year of construction: 2021, ARI Premio dashboard actuator, sliding drive, type 2.2 kN – used: Fgedpfsz Sdw Usx Am Esi Price per unit, ex works: €585.00 (net)! Manufacturer: ARI-Premio Type: 2.2 kN Year of manufacture: 2021 Serial number: SN100592339-027 Pn: 15/16 VA In: 65/69 mA m/m: 0.38/0.45 10 A Stroke: 20 mm Ty: 53/458 Available quantity to be determined Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: used, Indramat RAC 3.1-150-460-A0I-Z1-220 Spindle Drive Controller For sale is an Indramat / Bosch Rexroth RAC 3.1-150-460-A0I-Z1-220 AC Main Spindle Drive Controller – used, but in good, functional condition. Technical details: - Supply voltage: 3 x AC 380–460 V - Control voltage: AC 230 V - Weight: approx. 49 kg - Continuous current: approx. 92 A - Max. output power: approx. 55 kW - Ambient temperature: +5 °C to +45 °C (operation), -30 °C to +85 °C (storage) - Max. operating altitude: up to 1000 m above sea level - Protection class: IP 10, humidity class "F" according to DIN 40 040 - Integrated cooling via fan - Integrated emergency stop system Fgodpfoxl A Ncsx Am Eoi Condition: Used (see pictures). Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more new and used items in our shop! International shipping costs available upon request!