Used Height Gage for sale (35,121)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Lasdozzlhaepfx Ancjg Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1261, total width: 8,500 mm, total length: 24,000 mm, total height: 3,650 mm, No minimum price – guaranteed sale to the highest bidder! Two complete filling/packaging lines are for sale, consisting of the following: 2 x B&C (Bertoncello & Cecchin, Italy) pouch filling machines CV 80 DN, manufactured in 1997 2 x Latz palletizers LHP 1800 (new Siemens S7 control system in 2025) 1 x Latz stretch wrapper The lines include various roller conveyors. The machines will be dismantled in week 38. TECHNICAL DETAILS Possible sack volumes: 10, 15, 20, 45, 50, or 70 liters Lajdpfx Anszzn I Ajcjg MACHINE DETAILS Connection power: approx. 38 kW Overall width: 8,500 mm Overall length: 24,000 mm Overall height: 3,650 mm EQUIPMENT Defect removal belts Roller conveyors Latz stretch wrapper

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Lajdpfx Aezzlh Honcsg Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. Laodpjzzkt Uofx Anceg A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Lasdpfx Anozzkvcecjg Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 1,332 h, construction height: 180 mm, construction width: 220 mm, No minimum price—guaranteed sale to the highest bidder! Markforged Metal X TECHNICAL DETAILS Printing process: ADAM – Atomic Diffusion Additive Manufacturing Build volume: 300 × 220 × 180 mm Max. part size: 250 × 183 × 150 mm Max. part weight: 10 kg Layer height after sintering: 50 µm and 125 µm MACHINE DETAILS Supported materials: Copper, 17-4PH stainless steel, Inconel 625, H13 tool steel, D2 tool steel Print chamber: heated Print bed: heated, vacuum-sealed print plate, automatic print bed leveling Printing system: two nozzles for metal material and release material Dimensions & Weight Dimensions: 575 × 467 × 1,120 mm Weight: 75 kg Power supply: 100–120 / 200–240 V AC Ledpfx Anozx Rkbscoag Current consumption: 12 / 6 A Connection: IEC 60320 Type C20 Operating hours: 1,332 h EQUIPMENT Markforged Wash-1 Debinder Markforged Sinter-1 Sintering System Markforged Wash-1 TECHNICAL DETAILS Debinder Supported materials: all metals Cleaning media: Opteon SF79, Opteon SF80, or Tergo Metal Cleaning Fluid Control: integrated control system Workpiece holder: Stainless steel basket Washing area: 356 × 254 × 203 mm Washing volume: 18,356 cm³ MACHINE DETAILS Power supply: 110–120 V AC, single-phase Current consumption: 11 A Peak power consumption: 1,320 W Dimensions & Weight Dimensions: 609 × 685 × 1,067 mm Weight: 136 kg FEATURES Integrated control system Stainless steel basket Shut-off at low fluid level Shut-off at high vapor pressure Markforged Sinter-1 TECHNICAL DETAILS Furnace specifications Supported materials: chemically debound parts printed with Metal X Heating element: Kanthal Control: preprogrammed automatic cycle control Sintering cycle: 26 h Max. internal temperature: max. 1,300 °C Sintering capacity: 141 mm inner diameter × 305 mm length Sintering volume: 3,020 cm³ Sintering surface area: 348 cm² for a ceramic setter plate Setter plate dimensions: 11.4 × 30.4 cm Process gases: argon, argon-hydrogen mixture Retort: high-purity, carbon-free refractory retort MACHINE DETAILS Exhaust air requirement: 100–150 CFM, external exhaust Power supply: 200–240 V, single-phase Current consumption: 30 A Recommended circuit breaker rating: 50 A Dimensions & Weight Dimensions: 1,270 × 510 × 720 mm Weight: 136 kg FEATURES Pre-programmed automatic cycle control Kanthal heating element Ceramic setter plate High-purity, carbon-free refractory retort

Condition: ready for operation (used), Year of construction: 2005, operating hours: 71,080 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 22,000 rpm, controller model: Siemens SINUMERIK 840D, TECHNICAL DETAILS Travel in X-axis: 5,000 mm Travel in Y-axis: 3,000 mm Travel in Z-axis: 1,500 mm Max. workpiece dimensions (L × W × H): 4,000 × 2,000 × 1,000 mm Table length: 4,050 mm Table width: 2,050 mm Table height: 500 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Rapid traverse rate X-axis: 65 m/min Rapid traverse rate Y-axis: 65 m/min Rapid traverse rate Z-axis: 65 m/min Position of milling head: vertical Tool interface: HSK 63A Spindle speed: 22,000 rpm Spindle power: 30 kW Torque: 28.6 Nm Tilting axis A: ±110° Rotational range C-axis: ±182.5° Magazine capacity: 20 stations Max. tool diameter: 100 mm Max. tool weight: 6 kg MACHINE DETAILS Control system: Siemens SINUMERIK 840D Connected power: 150 kW Dimensions & Weight Dimensions (L x W x H): 8,000 x 7,500 x 6,200 mm Dimensions of control cabinet (L x W x H): 600 x 4,200 x 2,600 mm Machine weight: approx. 78,000 kg Laodpfx Ajzyl Azjncog Operating hours: 71,080 h EQUIPMENT Dust extraction hood on the milling head for connection to an on-site dust extraction system NC4 laser system for contactless tool measurement and tool breakage monitoring Renishaw RMP60 wireless probe for workpiece measurement Bellows/roller covers

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For businesses facing the next stage in their growth journey, there is now a unique opportunity to invest in a used AutoStore system with 15,600 bins and a total of 46 Red-Line robots. This comprehensive AutoStore system, integrated by Swisslog, combines high capacity, scalability, and proven performance in a package that rarely becomes available on the market. The system was installed in 2021 and is located in the USA, making it particularly suitable for companies with high order volumes, growth ambitions, or a need to consolidate warehouse flows. System Overview Grid: Double-Double Dimensions: approx. 24.1 x 24.8 m Height: approx. 5.5 m Number of bins: approx. 15,600 Bin size: 600 x 400 x 330 mm Robots & Capacity 46 RedLine robots Ledpfxjzc Hbls Ancoag 39 charging stations Ports & Flow 3 Relay Ports 8 Conveyor Ports Costs for dismantling/assembly and integration are additional. We can assist in finding suitable integration partners among the various options available on the market. Contact us for a full specification and any other questions you may have.

Condition: used, Year of construction: 2019, operating hours: 100 h, functionality: fully functional, type of input current: AC, input voltage: 220 V, input frequency: 50 Hz, TESA TESATRONIC TT20 Measuring System with GT-31 Probe The item for sale is a used TESA TESATRONIC TT20 electronic measuring system supplied with a TESA GT-31 lever-type inductive probe. The TT20 is designed for use with one or two TESA inductive probes. It supports individual measurements as well as sum and difference measurements, making it suitable for dimensional inspection, production control, workshop applications and metrology laboratories. PRODUCT IDENTIFICATION • Manufacturer: TESA Technology / TESA SA • Model: TESATRONIC TT20 • Display unit order number / Type No.: 04430009 • Probe model: TESA GT-31 Gage Head, 10P • Probe part number: 32.10802 • Country of manufacture: Switzerland • Applicable standard: DIN 32876, Part 1 • Number of probe inputs: 2 – channels A and B TT20 TECHNICAL SPECIFICATIONS • Number of measuring ranges: 7 • Minimum selectable measuring range: ±5 µm • Maximum selectable measuring range: ±5000 µm • Display resolution: 0.1 µm • Measurement modes: channel A, channel B, sum and difference • Units: metric and inch • Range selection: manual or automatic according to the measured value • Response time of the analogue, digital and LED classification displays: ≤80 ms • Digital display holding time: 80 ms DISPLAY • Combined digital and pseudo-analogue LCD indication • LCD dimensions: 126 × 62 mm • Numerical display: 6 digits plus “+” or “–” sign • Digit dimensions: 12.5 × 6.6 mm • Pseudo-analogue scale length: 110 mm • Number of analogue scale divisions: 50 • Selectable pointer or bar-graph indication FUNCTIONS • Two probe inputs for single, sum and difference measurements • Manual or automatic measuring-range selection • Direct conversion between metric and inch units • Separate controls for each measuring channel • Programmable tolerance limits • Three-class value classification • Coloured LED tolerance indication with signal outputs • HOLD function for step-by-step measurement routines • Automatic recognition of compatible TESA probes manufactured from 1997 onwards • Bidirectional, opto-isolated RS-232 output • D-Sub In/Out connector • Power supply through an external mains adapter CATALOGUE DISPLAY VALUE LIMITS The following catalogue values apply at a temperature of 20°C and relative humidity of no more than 50%: • Analogue display: 2% • Digital display: 0.3% • Digital output: 0.3% These values refer to the TT20 display unit specification. They are not a current calibration result or a guaranteed accuracy value for this particular used set. Lasdjwq Dp Depfx Anceg DIMENSIONS AND CONSTRUCTION • Dimensions: 255 × 235 × 120 mm • Dimensions are specified as width × depth × height • Housing material: resistant plastic • Installation: benchtop workshop or laboratory use CONDITION Used equipment with visible signs of normal use and storage. The unit powers on, and the display and indicator lights operate as shown in the photographs. The display currently shows a selected measuring range of ±2000 µm. This is one of the available ranges and not the maximum capability of the TT20. The unit has not been subjected to a complete laboratory performance test. No current calibration or verification certificate is included. PACKAGE CONTENTS • TESA TESATRONIC TT20 display unit, Type No. 04430009 • TESA GT-31 lever-type probe, part number 32.10802, marked 10P • Connected cables shown in the photographs

Condition: used, machine/vehicle number: 007667, Max width workable: 1100 mm Max length workable: 2500 mm Laedeu H R Hmspfx Ancjg Max height workable: 250 mm

Condition: used, Year of construction: 1988, used in excellent condition low mileage cleaned functionally tested Lodpfxoz Ebtwe Ancjag partially refurbished Manufacturer: Graule Type: AGT Year of manufacture: 1988 Machine No.: 05 Motor kW: 1.6 kW, 220 V Swivels to the right up to °: 45 Swivels to the left up to °: 45 Tilts up to °: 45 Machine base is mobile Cutting height mm approx.: 85 Cutting length mm approx.: 380 Blade diameter mm approx.: 300 Saw blade bore mm approx.: 30/40 Dust extraction connection mm: 80 Space requirement approx. L x W x H mm: 600 x 900 x 1000 Weight approx. kg: 50 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: reconditioned (used), functionality: fully functional, measuring range X-axis: 12 mm, Mitutoyo roughness measuring machine Surftst SJ201 in good condition with carrying case and roughness standard measuring ranges: Z = 0,3mm (optional stage 550mm) X = 12.5mm Optional: optional stylus from € 800,-- (different types) Vice (used) € 100,-- Mitutoyo Height gage as stage € 200,-- CEJ stage with granite base € 250,-- Mitutoyo Stage 178-039 upgrade € 450,-- Lodpfex N Szrox Anceag some prisms on demand

Condition: used, machine/vehicle number: 008702, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Ljdpszq Urgefx Ancsag Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, We offer a continuous jet dyeing machine with a roller track – GIETART GW 1500-415. Manufactured in 2005. Number of turbines: 4. Power consumption per turbine: 11 kW. Width of the dyeing chamber: 1500 mm. Height of the dyeing chamber: 415 mm. Laedpfxoz Ebtko Ancsg Roller tracks with electric drive: 11.5 m + 11.5 m. Sweeping brush: 1500 mm. Total power consumption of the machine: 65 kW. Complete documentation, including electrical diagrams, is included with the machine.

Condition: used, Year of construction: 1991, Design: fixed Table size: 1200x730 mm Table height: 900 mm Spindle speeds: 3000/4500/6000/7000/10000 rpm Milling cutter diameter: 30 mm Spindle working length: 180 mm Spindle direction: right/left Speed display: optical Automatic motor brake: mechanical foot brake Design of fence jaws: Aigner fence system Fence adjustment: manual Display of milling fence: none Feed mechanism: with 3 rollers Control panel position: bottom Weight approx.: 600 kg Lsdpjz Ebplsfx Ancoag Motor power: 4 kW Dust extraction diameter: 120/120 mm Location: Rieth

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, total width: 1,410 mm, overall weight: 2,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS UNITS Number of units: 10 1. Unit: Pre-milling unit 2. Unit: Gluing unit 3. Unit: Pressure rollers 4. Unit: Trimming unit 5. Unit: Rough milling unit 6. Unit: Edge rounding unit Ljdpjz Eawzefx Ancsag 7. Unit: Fine milling unit 8. Unit: Edge rounding unit 9. Unit: Radius drawing unit 10. Unit: Brushing unit ELECTRICAL DATA Voltage: 400 V Power: 16.2 kW MACHINE DETAILS Year of manufacture: 2020 Color: Gray CE marking: present Serial number: 20.082 Length: 6,000 mm Width: 1,410 mm Height: 1,670 mm Weight: 2,200 kg Transport length: 6,000 mm Transport width: 1,415 mm Transport height: 1,670 mm Transport weight: 2,200 kg Transport packages: 1 EQUIPMENT Tools for pre-milling unit Tools for pressure rollers Tools for trimming unit Tools for rough milling unit Tools for edge rounding unit Tools for fine milling unit Tools for radius drawing unit Tools for brushing unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Lasdpez Ay Rrefx Ancjg Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Laedpsz D Taaefx Anceg Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: good (used), Year of construction: 2008, operating hours: 365 h, Manitou 180ATJ articulating boom lift / work platform, 18m working height, 4x4x4, 2008, 365 hours, diesel. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make an appointment free of charge for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Lsdpfoz Dg Uwox Ancoag

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Lodpfjzzx H Aex Ancoag Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Spindle cooling (20 bar) Documentation ShopMill function Note: The machine has been regularly maintained electronically and mechanically. New ball screws and linear guides were installed approximately 2 years ago.

Condition: good (used), Year of construction: 2006, operating hours: 1,010 h, Genie GS-2032 scissor lift, articulated boom lift, 2006 / 1010 hours, 8-meter working height. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any warranties (see our general terms and conditions). You can arrange a non-binding appointment for an inspection and/or test drive. Please call in advance; we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 Laodpfsz A Akxex Ancog 5391 LR Nuland

Condition: good (used), Year of construction: 2006, operating hours: 1,080 h, JLG 2646ES scissor lift, 2006 / 1080 hours, 10-meter working height. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, and without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on-site. Lsdpfx Aez A Ak Eenceag Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2006, operating hours: 1,200 h, Genie GS-2032 scissor lift, articulating boom lift, 2006 / 1200 hours, 8-meter working height. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-works Nuland. Lsdpfx Aez A Akrjncjag Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without warranties (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2006, operating hours: 975 h, JLG 2646ES scissor lift, 2006 / 975 hours, 10-meter working height. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can arrange a viewing and/or test drive without any obligation. Please call beforehand to make an appointment, as we are not always on site. Laodpfx Asz A Alcsncjg Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2006, operating hours: 1,300 h, JLG 2646ES scissor lift, aerial work platform, 2006 / 1300 hours, 10-meter working height. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on-site. Lajdpfx Ansz A Ak Sscog Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland