Used Cycle Lathe for sale (8,464)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Gildemeister NEF 320 K lathe cycle-controlled Siemens Sinumerik 810 DL control built in 2001, very good original condition Technical data: >> Built in 2001 >> Swing diameter over bed: 320 mm >> Swing diameter over slide: 150 mm >> Distance between centers: 750 mm >> Plane travel: 185 mm >> Feed X: 4 m/min >> Feed Y: 4 m/min >> X rapid traverse: 8 m/min >> Y rapid traverse: 10 m/min >> Spindle head DIN 55027 size 6 >> Spindle bore: 52 mm >> Drive power 100%: 7 kW >> Speed range: 14-3550 (2 levels) rpm >> Tailstock quill diameter: 70 mm >> Tailstock quill stroke: 120 mm >> Tailstock quill taper: ISO MK 5 >> Dimensions: 2600 X 1440 X 1440 mm >> Weight of the machine approx.: 2.0 t Ijdpfx Acsv Aix Aj Ejii Accessories and equipment: >> 1 three-jaw chuck Röhm 200mm with 2 sets of jaws >> Mulifix size B with 4 steel holders >> Operating instructions, electrical plans >> Machine feet About the machine: Offered is a Gildemeister NEF 320 K lathe with automatic cycles, built in 2001, in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Gildemeister runs very quietly even at high speeds. This newer generation of lathes is very user-friendly and surfaces can be produced as if they were ground. The machine comes from a training workshop of a large company. Take the opportunity to inspect this machine on site under power and convince yourself of its condition.

Condition: used, Year of construction: 1998, turning diameter 570 mm Iedpfougawfex Ac Eoii turning length 2000 mm control total power requirement 15 kW weight of the machine ca. 3,5 t dimensions of the machine ca. m

Year of construction: 2008, condition: ready for operation (used), Turning diameter over bed: 300mm, max. workpiece length: 500mm/600mm, travel X: 319mm, feed X/Z: 3000mm/min/4000mm/min, rapid traverse X/Z: 4000mm/min/5000mm/min, speed: 4000rpm. Collet chuck: 5C 173E, spindle bore: 40mm, tool positions: 4, spindle travel of tailstock: 110mm. Machine dimensions X/Y/Z: approx. 2000mm/1450mm/1500mm, weight: approx. 1200kg, control: Fanuc Series 0i-TC. Including 380V transformer, Fluidtec spraying system, collet set and multifix holder set. Documentation available. On-site inspection is possible. Iodpfx Acju T Rife Eoii

Year of construction: 2001, condition: used, turning diameter 420 mm turning length 1200 mm Iijdpfx Ash N D Unec Eji control Fanuc bore diameter 60 mm

Condition: excellent (used), Year of construction: 2001, turning diameter 330 mm turning length 750 mm control WEILER D 1 centre height 165 mm centre distance 750 mm swing diameter over face slide 160 mm spindle bore 42 mm spindle turning speed range 1 - 4500 U/min spindle head DIN 55027 Gr. 5 face slide travel 180 mm feeds X-axis mm/U feeds Z-axis mm/U rapid traverse X-axis 5 m/min rapid traverse Z-axis 10 m/min feed power X/Z axis 3000 / 6000 N tailstock taper MT 3 tailstock quill diameter 50 mm Iijdjwi Ugqopfx Ac Eei tailstock quill stroke 110 mm total power requirement 10 kW weight of the machine ca. 1,3 t dimensions of machine L x W x H 1,8 x 1,2 x 1,7 m Accessories: 3-jaw chuck SCHUNK 0 mmø, changing tool post, coolant

Condition: used, Year of construction: 2008, turning diameter 560 mm turning length 2000 mm control FANUC Series oi-TC CNC spindle turning speed range 2200 U/min spindle bore 82 mm tailstock quill taper MT 5 Ijdpfx Aceviyh Uo Eoii quill stroke 150 mm total power requirement 7,5 kW weight of the machine ca. 3800 kg dimensions of the machine ca. 3800 x 1750 x 1600 mm

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 244, spindle bore: 82 mm, turning diameter: 350 mm, center width: 1,565 mm, turning diameter over bed slide: 540 mm, spindle speed (max.): 3,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Control: HEIDENHAIN MANUAL PLUS 4110 Swing diameter over bed: 540 mm Swing diameter over cross slide: 350 mm Distance between centers: 1,565 mm Workpiece weight: max. 1,500 kg Spindle bore: 82 mm Spindle mount: B 8 DIN 55027 Spindle taper: metric 90 Iijdpfx Aowvhxysc Eoi Speed range: 0–600 / 0–3,000 rpm Power: 17.0 / 25.0 kW Torque: max. 1,620 Nm Axes X axis travel: 270 mm Z axis travel: 1,565 mm Rapid traverse X: 10,000 mm/min Rapid traverse Z: 10,000 mm/min Feed range: 0.002–5,000 mm/min Tooling Type: Multifix size C Tool cross-section: max. 32 x 32 mm Quill diameter: 80 mm Quill stroke: 200 mm Quill taper: MK5 MACHINE DETAILS Dimensions: 5,000 x 1,700 x 1,880 mm Weight: 3,200 kg EQUIPMENT - technical documentation - 3-jaw chuck (diameter approx. 400 mm) - FORKARDT power chuck with 3 jaws (diameter approx. 250 mm, max. speed: 4,000 rpm) - 2 steady rests - Parat 4-position turret - digital axis drives - coolant system - chip container

Condition: used, Year of construction: 1996, turning diameter 400 mm turning length 915 mm control NUM Type 1062 T total power requirement 12,5 kW Iiedpst Hw Szefx Ac Eoi weight of the machine ca. 5500 kg dimensions of the machine ca. m

Year of construction: 1986, condition: ready for operation (used), Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible. Iiedpfewmqx Djx Ac Eji

Condition: good (used), Year of construction: 2009, 1 used CNC lathe Brand DMT/Kern Type CD 480 x 3000 Year of manufacture 2009 Control Manual Plus 620 Iisdpfx Aeu A Ducoc Eji Technical specifications: Center height 230 mm Turning diameter over bed 475 mm Center distance 3000 mm Cross travel 255 mm Spindle head DIN 55026/6 Spindle bore 82 mm Power consumption 30 kW Tool holder turret VDI 40 Equipped with Turret Hinged belt conveyor Complete documentation available! Machine is ready for use and can be tested on-site!

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, center height: 200 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, total length: 2,495 mm, total width: 1,730 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 1,500 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 4,000 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Cycle controlled lathe center width 1000 mm centre height 200 mm spindle bore 53/50 mm max. Speed 4000 rpm Iodpfedtmwtex Ac Ejii Spindle connection size 5, DIN55029 Max. drive power Drive power 7,5 / 10 kW Manual machine (operation via electronic handwheels) Siemens 828D full CNC control dimensions (LxWxH) 2320 x 1730 x 1700 mm Machine weight 1500 kg As a regional partner of EMCO we offer maintenance, service and training in the field of conventional machines. Visit our showroom in Stuttgart for machine inspections.

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Iijdpfx Acew I S Uuo Eoi Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Tool changer checked and adjusted. X-axis belt replaced and machine zero point set. Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 12.0273 / 121V0308, spindle bore: 128 mm, turning diameter: 530 mm, center width: 3,000 mm, turning diameter over bed slide: 830 mm, spindle speed (min.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the machine punctually between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Max. machining diameter: 530 mm Swing diameter over bed: 820 mm Swing diameter over cross slide: 530 mm Distance between centers: 3,000 mm WORK SPINDLE Ijdpfx Acswu E Ico Eeii Front spindle nose (DIN 55027, 55029): B11 / C11 Spindle bore: 128 mm Taper in spindle (metric): 132 mm Control: HEIDENHAIN MP620 Spindle speed range: 0–400 / 20–1,800 rpm Torque level 1: 2,150 Nm Torque level 2: 430 Nm X-AXIS Travel: 370 mm Ballscrew diameter/pitch: 32/5 mm Rapid traverse: 10 m/min Max. feed force: 10 kN Repeatability of positioning: 0.01 mm Z-AXIS Ballscrew diameter/pitch: 50/10 mm Stroke: 3,000 mm Rapid traverse: 10 m/min Max. feed force: 20 kN Repeatability of positioning: 0.015 mm TOOL TURRET Type: Multifix D Tool profile: 40 x 40 mm TAILSTOCK Tailstock quill diameter: 115 mm Quill stroke: 225 mm Morse taper in quill: Morse 6 MACHINE DETAILS Connection voltage: TN-C 400/230 V Frequency: 50 Hz Installation dimensions: 5,000 x 2,200 x 1,900 mm Weight: 5,300 kg Connected load: 38 kVA EQUIPMENT With technical documentation Coolant tank capacity: 200 l Chip conveyor capacity: 160 l

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning length: 1,000 mm, turning diameter: 570 mm, quill stroke: 190 mm, bed width: 360 mm, rotational speed (max.): 2,500 rpm, TECHNICAL DETAILS Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section according to DIN 770 hxb: max. 20 x 20 mm Thread pitch: 01-400 mm Main spindle Spindle head according to DIN 55 027: Gr. 8 Spindle diameter in front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Speed range gear stage I: 3–500 rpm Speed range gear stage II: 15–2500 rpm Iiodpfxjwmck Se Ac Eji Constant cutting speed: 1–9999 m/min Speed control: 50–120% Load display in % on screen: 0–140% Main drive Three-phase AC motor: 0–120 kW Drive power (60%/100% duty cycle): 19/15 kW Maximum torque (60%/100% duty cycle): 1,800/1,400 Nm Total speed range: 3–2,500 rpm Number of gear stages: 2 Feed drives Feed range, flat and Longitudinal: 0.01-50 mm/rev Max. feed rate, transverse (rapid traverse): 5 m/min Max. feed rate, longitudinal (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Tool holder Number of tool holders: 8 Diameter of the 8 cylindrical shank holders according to DIN 69 880: 30 mm Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Inner taper of the quill: MK 5 Tip angle, normal: 60° MACHINE DETAILS Dimensions (L x W x H): 3.25 x 2.03 x 1.95 m EQUIPMENT - Disk tool turret for 8 tools with VDI 30. - Not for driven tools - Machine manual, technical documentation; - 3-jaw chuck, various tool holders

Condition: ready for operation (used), Rotation diameter over bed/face slide: 710mm/410mm, turning length: 2000mm, center height: 350mm, spindle bore: 92mm, speed: 1800rpm, quill diameter: 210mm, rapid traverse X/Z: 8m/min/10m/min, feed: 5m/min, feed force: 2000daN. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5600kg. Documentation available. On-site inspection is possible. Iisdpfx Ajvnd Troc Eoi

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Iiedpoua E Txefx Ac Eei

Condition: ready for operation (used), Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible. Iiodpfxjv Amrte Ac Eji

Year of construction: 1995, condition: ready for operation (used), A Boehringer cycle-controlled CNC lathe is available. Turning diameter over bed/face slide: 820mm/520mm, turning length: 1000mm, spindle bore: 128mm, quill diameter: 125mm, quill stroke: 280mm, max. workpiece weight: 5000kg. Machine dimensions X/Y/Z: approx. 3700mm/2400mm/2500mm, weight: approx. 6500kg, operating hours: 39814h. On-site inspection is possible. Iiodpfx Acjwu E Dde Eoi

Condition: ready for operation (used), A Romi CNC cycle lathe is available. Center height: 215mm, center width: 1000mm, turning diameter over bed/face slide: 430mm/204mm, spindle bore: 53mm, rapid traverse X/Z: 7.5m/min / 10m/min, spindle speed: 4000rpm, main spindle motor power: 7.5kW, tool positions: 8, machine dimensions X/Y/Z: approx. 2800mm/1300mm/2000mm, weight: approx. 3000kg, control: GE Fanuc series 21i-TB. Documentation available. On-site inspection is possible. Iijdpfxou H H Hve Ac Esi

Condition: ready for operation (used), Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, spindle diameter: 120mm, speed: 3050rpm, drive power: 12kW, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible. Iisdjvnd Tfopfx Ac Esi

Year of construction: 2006, condition: ready for operation (used), Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, speed: 3050rpm, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible. Iodpfx Asvnd Tloc Eoii

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Iiedpfswxfaaex Ac Esi

Year of construction: 1996, condition: ready for operation (used), Center height: 165mm, center distamnce: 600mm, turning length: 560mm, max. rotational speed: 3200/min, swing over surface/ bed: 200/ 315mm, weight: 1.8t. Iisdpfxsgrn N Re Ac Eei

Year of construction: 2006, condition: ready for operation (used), Turning length: 3000mm, center height: 392mm, swing over bed/ slide: 800/ 490mm, rotational speed: 1500-6000/min, tailstock diameter: 100mm, controls: FAGOR 800 T, with documentation, three-jaw chuck 400mm, with change jaws, four-jaw plate face 500mm, Multifix change holder, fixed bezel. Iiodpfx Aceiwuh Ts Eji

Year of construction: 2000, condition: ready for operation (used), X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible. Iiedpfeqv Et Iex Ac Eei