Lathe - cycle-controlled

WEILER E 50-1-D

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h Nledpju Nc Riefx Ai Aeh milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, Year of construction: 1981, machine/vehicle number: 283, Item No. 26208 Technical Data: Nedpfxezyl H Ho Ai Aolh - Maximum turning height 120 mm - Maximum turning diameter 450 mm - Maximum swing over bed 250 mm - Spindle bore 23 mm - Spindle mounting with threaded nose DIN 55027 - Taper of tailstock spindle MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - transverse 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Footprint approx. approx. W 1200 x H 1250 x D 650 mm - Weight approx. approx. 700 kg - Including: - 3-jaw chuck - Quick-change tool holder - Rotating center - Separate tool cabinet with various accessories

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Nljdpfevt Amusx Ai Ash Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system

Condition: used, Year of construction: 1966, Max. pulling force: 5 t, max. stroke: 850 mm, max. cutting speed: 12 m/min, max. return speed: 25 m/min, clamping area: 410 x 575 mm, groove width: 3 - 90 mm, drilling diameter: 13 - 500 mm, workpiece weight: 6000 kg, depth of the machine base below floor level: 1,400 mm. Nlsdpecm Elnofx Ai Ash

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Variable speed control, 0.05 - 0.5 RPM Handheld remote control Njdpfx Ajid Szcoi Aolh Height: 600 mm Diameter: 1500 mm Foot pedal remote control available at an additional cost.

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - Center height : 175 [mm] - Table orientation : 9 [°] - Universal wheelhead - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Motor power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 - Orientation of grinding wheel holder headstock : 270° (3 x 90 °) - Boring for internal spindle : 90 [mm] - Orientation of part holder headstock : 180 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Motor power : 0,9 [kW] - Inner cone tailstock : Morse 4 - Tailstock sleeve travel : 30 [mm] - Dimensions : 2860 x 1680 x 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Hydraulic tail stock - Lubricating tank with paper filter - 1 internal grinding spindle Nledpfx Aijxy S A Io Aeh - 1 diamond holder - 2 two-key steady rests - 1 three-key steady rest - 1 set of drive knobs - Various wheel holders

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l feed length max. 600 mm total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. Nljdpfx Ajxab R Uei Aoh - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg cross travel max. 270 mm 130 inkl. Spannung kg Nlsdpfx Aieuxftrs Aoh 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm Nlsdpfjyuqacex Ai Aoh TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: excellent (used), Year of construction: 1979, turning diameter over bed 480 mm turning diameter over slide rest 295 mm turning length 1000 mm spindle bore 56 mm weight of the machine ca. 1,8 t Njdpsyiu T Ajfx Ai Aslh dimensions of the machine ca. 1,4 x 0,8 x 1,6 m