Cycle-controlled lathe

WEILER E 40

Condition: excellent (used), Year of construction: 2020, Steady rest for WEILER E40 and E50 lathe In very good condition. Price for E40 steady rest: €2,500 Price for E50 steady rest: €2,850 Fpsdstx Avkjpfx Apwok Clamping range: 10 – 150 mm.

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Fodpjxxxbzofx Apwepk Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2016, operating hours: 3,752 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: 640, rotational speed (max.): 20,000 rpm, overall weight: 9,650 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 1,615 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 120, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine in very good technical condition! Fodpfxjzaqz De Apwopk

Year of construction: 2000, condition: good (used), Parts shown by hand not included. Fpedopy Eqmepfx Apwok 1350 mm length, D 480 mm,

Condition: good (used), Year of construction: 1999, CONFIGURATION, ARCHITECTURE: PARALLEL LATHE GUIDANCE: PRISMATIC, 3 WAYS THE CARRIAGE CAN MOVE WITHOUT INTERFERING WITH THE TAILSTOCK AND STEADY RESTS, ESPECIALLY SUITABLE FOR SHAFTS DISTANCE BETWEEN CHUCK AND TAILSTOCK: 6000 mm CHUCK DIAMETER: 1000 mm SWING OVER BED: 1020 mm TURNABLE DIAMETER: 700 mm BED WIDTH: 900 mm LOAD CAPACITY BETWEEN CHUCK AND TAILSTOCK: 12,000 kg 4-POSITION AUTOMATIC TOOL TURRET: YES MOTORIZED TAILSTOCK: YES Fedpsyhrnuefx Apwjpk SPINDLE SPEED: 1–720 rpm CONTROL (BRAND/MODEL): SIEMENS 840 D POWER LINE AIR CONDITIONING IN ELECTRICAL CABINET: YES CHIP CONVEYOR: YES, DRAG-TYPE, NEW IN 2021 EXTRAS OPEN STEADY REST: 2 UNITS CLOSED STEADY REST: 1 UNIT INSTALLED MACHINE DIMENSIONS (L x W x H): 14 x 3 x 2.5

Condition: used, Year of construction: 2002, Tacchi HD-1450 CNC 725 x 4000 Heavy Duty Centre Lathe (2002) with Siemens Sinumerik 828D, 1000mm Diameter 4 Jaw Double Chuck, Chuck Bore Diameter 515mm, Barrufaldi Ban 400/4 4 Way indexing Tool Post (2) x 3 Point Steadies, Tailstock, Swarf Conveyor, Centre Height 725mm, Max Swing 1450mm Distance between Centres 4000mm, Main Motor 60kw, Max Workpiece Weight 15,000kg. Country of Origin: Italy Fsdex T Ddaspfx Apwjpk Location: This lot is located in Aberdeen, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, bar passage: 65 mm, bar diameter (max.): 65 mm, We are offering this ready-to-use Mori Seiki NTX1000 CNC turning and milling center, year of manufacture 2011. Manufacturer: Mori Seiki Model: NTX1000 Year of manufacture: 2011 Condition: ready for operation Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling center Fpedpfxjy Hrhae Apwjk Bar capacity: 65 mm FMB bar feeder 3 m Extended tool magazine with 75 positions Chip conveyor with drum filter Knoll high-pressure system 70 Bar Renishaw probing system Numerous tool holders If you have any questions or require more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 125 T Offer Details Stock Number 1039-8700 Machine Type Machining Center - Vertical Manufacturer DECKEL MAHO Type DMU 125 T Year of Manufacture 1998 Control TNC 426 Heidenhain Location D-59302 Oelde Country of Origin Germany Delivery Time Upon Agreement Incoterms EXW (Ex Works) Additional Information CNC - Vertical Machining Center DECKEL MAHO - DMU 125 T - Coolant Through Spindle (CTS) Technical Details X-axis travel 1,250 mm Y-axis travel 880 mm Z-axis travel 800 mm Control TNC 426 Heidenhain Main Spindle: Spindle Speed Range - Main Spindle max. 12,000 min/-1 Drive Power - Main Spindle 15 / 10 kW Max. Torque 500 Nm Tool Interface SK 40 Work Table: Table Surface Area 1,500 x 1,050 mm Max. Table Load 2,500 kg Number of T-slots 10 T-slot Width 18 H7 mm T-slot Spacing 100 mm Tool Changer: Number of Tool Positions 30 Max. Tool Diameter 80 mm Max. Tool Diameter with Free Neighboring Position 160 mm Max. Tool Length 315 mm Max. Tool Weight 8 kg Max. Total Weight 100 kg Feeds: Rapid Traverse (X / Y / Z) 15 m/min Feed Rate 10,000 mm/min Total Power Consumption 29 kW Fedszfzhdspfx Apwjpk Machine Weight approx. 16.0 t Space Requirement approx. 7.0 x 5.0 x 3.3 m Accessories Documentation Chip Conveyor Coolant System High-Pressure Cooling Internal Coolant Supply Tool Changer Measuring Probe Heidenhain Electric Handwheel

Condition: new, Maximum turning diameter: 1,100 / 1,800 mm Turning diameter over bed: 538 mm Fsdpszrluuefx Apwspk Turning diameter over slide: 300 mm Spindle mounting: DIN 55026 Spindle bore: 82 mm Spindle speeds: max. 3,000 rpm Drive power: 12/30 kW Machine weight: 2,700 / 3,000 kg

Condition: new, Center distance: 2,000 – 4,000 mm Swinging diameter over bed: 740 mm Swinging diameter over carriage: 460 mm Fsdpjzrlvxjfx Apwspk Spindle mounting: DIN 55026 Spindle bore: up to Ø 140 mm Spindle speed: max. 2,300 rpm Drive power: 13/32 kW Machine weight: 5,000 – 7,000 kg