Used Cycle Lathe for sale (8,548)

Condition: excellent (used), Year of construction: 2005, Turning length 610 mm Turning Ø 360 mm Ø on bed 360 mm Ø on carriage 200 mm Distance between centres 610 mm X axis 180 mm Z axis 610 mm Spindle nose CM 6 Spindle bore 54 mm Number of turrets -1 Number of tools - 8 Turret VDI 20 Nodpfovc E Rnjx Ab Dowp Turning tool selection 16 x 16 mm Boring bar Ø 25 mm Speed 4200 rpm Spindle motor capacity 7.5 kw Dimensions: 1950 x 1320 x 1640 mm Weight 2100 kg

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, center height: 200 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, total length: 2,495 mm, total width: 1,730 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 1,500 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 4,000 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Cycle controlled lathe center width 1000 mm centre height 200 mm spindle bore 53/50 mm max. Speed 4000 rpm Nwodpfx Ajdtmwtob Dsp Spindle connection size 5, DIN55029 Max. drive power Drive power 7,5 / 10 kW Manual machine (operation via electronic handwheels) Siemens 828D full CNC control dimensions (LxWxH) 2320 x 1730 x 1700 mm Machine weight 1500 kg As a regional partner of EMCO we offer maintenance, service and training in the field of conventional machines. Visit our showroom in Stuttgart for machine inspections.

Condition: used, Year of construction: 2000, turning diameter 500 mm turning length 1500 mm control MONFORTS CONTROL control SYSTEM EURO TURN turning diameter over bed slide 290 mm spindle bore 70 mm spindle turning speed range 3 - 2800 U/min spindle power 15 kW max. torque on the spindle 1530 Nm spindle head DIN 55027 Gr. 8 feed power X/Z axis 11300 N rapid travel - longitudinal/face 10 / 5 m/min bed width 360 mm travel of cross-slide 265 mm upper slide travel 140 mm turning tool - shaft cross cut 32 x 25 mm tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock taper MT 5 total power requirement kW weight of the machine ca. 3,3 t dimensions of machine L x W x H 3,45 x 1,65 x 1,93 m Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, Nsdpfsvh Ncrex Ab Dswp coolant

Year of construction: 2006, condition: ready for operation (used), Turning length: 3000mm, center height: 392mm, swing over bed/ slide: 800/ 490mm, rotational speed: 1500-6000/min, tailstock diameter: 100mm, controls: FAGOR 800 T, with documentation, three-jaw chuck 400mm, with change jaws, four-jaw plate face 500mm, Multifix change holder, fixed bezel. Nwsdpfxjiwuh Te Ab Dsp

Condition: excellent (used), Year of construction: 2016, Machining center Make KNUTH Nedpotiauhofx Ab Djwp Type EcoMill 350 CNC

Condition: repair required (used), Year of construction: 1997, functionality: limited functionality, turning length: 1,000 mm, turning diameter: 365 mm, turning diameter over bed slide: 570 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, controller model: NUM 1062, No minimum price - guaranteed sale to the highest bid! Nedswqgqkjpfx Ab Dewp Condition: Mechanically very good, old tube monitor defective TECHNICAL DETAILS Turning length: 1,000 mm Spindle speed: 3 - 2,500 rpm Machining diameter: 570 mm Swing diameter (max.): 570 mm Turning diameter (max.): 365 mm Workpiece length max.: 1,000 mm Number of cross slides: 1 Spindle diameter: 62 mm Feed Z: 0 - 10,000 mm/min Feed X: 0 - 5,000 mm/min Tool holder: Chisel holder Quill mount: MK 5 MACHINE DETAILS Control: NUM 1062 Connected load: 35 kVA Connection voltage: 400 V Mains frequency: 50 Hz Overall height: 1,800 mm Total weight: 4,000 kg Space requirement length: 3,400 mm Space requirement width: 1,900 mm EQUIPMENT - 3-jaw chuck - Various soft jaws - Tailstock

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,500 mm, turning diameter over bed slide: 475 mm, rotational speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,680 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Control: Fagor CNC 8055 Turning diameter over recess: 710 mm Turning diameter over cross slide: 240 mm Turning diameter over bed: 475 mm Max. turning length (with turret): 1,500 mm Spindle Bar capacity: 51 mm Recess of spindle nose: 248 mm Spindle nose: ASA D1-6 Spindle bore: 65 mm Speed range: 100 - 4,500 rpm Spindle power: 11 kW Max. torque: 29.3 kgm Tool handling Tool positions: 8 Square tool shaft height: 25 mm Shaft diameter for boring bar: 40 mm Tool holder: VDI 30 Indexing time: 0.42 s Travel paths X-axis: 260 mm Z-axis: 1,680 mm Nwodpfx Aev Ifw Sob Dep Rapid traverse speeds Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 15 m/min Tailstock Max. workpiece weight (with tailstock): 1,500 kg Tailstock quill taper: MK 5 Quill range: 150 m Quill diameter: 80 mm Quill taper: MK 5 Bed width: 355 mm X-axis motor: 7.3 Nm Z-axis motor: 11.9 Nm Chuck dimensions: 200/4,000 mm MACHINE DETAILS Dimensions (L x W x H): 3,520 x 1,935 x 2,022 mm Weight: 3,150 kg Foundation: 2,920 x 2,055 mm No additional tools or clamping devices included.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2002.1023-01, turning diameter: 420 mm, center width: 1,200 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, controller model: Siemens Sinumerik 840, Extensive accessory package included! TECHNICAL DETAILS Turning diameter: 420 mm Center distance: 1,200 mm Spindle bore: 51 mm Speed: max. 3,000 rpm Center height: 210 mm Control: Siemens Sinumerik 840 MACHINE DETAILS Dimensions (L x W x H): 2,700 x 1,300 x 1,800 mm Weight: approx. 3,500 kg Power supply: 400 V - 3 AV - 50 Hz Nodpfx Abewa Rnfs Dewp EQUIPMENT - Steady rest - Collet chuck 173E (Ortlieb) - Parat base holder - 14 Parat tool holders (WD2/25) - Machine feet - Schunk Rota-G D200 key bar chuck - Live center - Machine documentation (operating manual / programming manual / Electrical circuit diagram / data backup on CD)

Condition: used, Year of construction: 2017, Emcomat E300 for sale. Nwsdpfx Aow I S Uueb Djp The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Tool changer checked and adjusted. X-axis belt replaced and machine zero point set. Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Year of construction: 1996, condition: ready for operation (used), Center height: 165mm, center distamnce: 600mm, turning length: 560mm, max. rotational speed: 3200/min, swing over surface/ bed: 200/ 315mm, weight: 1.8t. Nedpfxjgrn N Re Ab Dewp

Condition: good (used), Year of construction: 1998, mas masturn 40 cnc teach-in Heidenhain control 1998 max. turning diameter 400 mm max. turning diameter over bed 250 mm max. turning length 800 mm spindle 1 - 2400 rpm Nsdpfxewbpute Ab Dowp spindle bore 61 mm 11 kW including accessories and documentation machine is powered up for inspection.

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 500 mm, spindle bore: 75 mm, turning length: 1,000 mm, turning diameter: 500 mm, Equipment: rotational speed infinitely variable, Dormac CY-K500T Teachin lathe Turning diameter above bed: 500 mm Passage: 75 mm Turning length: 1000 mm Transport dimensions (LxWxH): 300x180x210 cm Weight: 2800 kg Steering: Fagor Year of construction: 2009 Options: Including tools and documentation Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Dormac CY-K500T Teachin lathe Turning diameter above bed: 500 mm Tube diameter: 75 mm Turning length: 1000 mm Transport dimensions (LxWxH): 300x180x210 cm Weight: 2800 kg Control: Fagor Year of manufacturing: 2009 Options: Includes tools and documentation Location: Hamont-Achel, Belgium Call or email for more information: Also view our other advertisements Nwjdpfx Absrfxiho Dep We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. Dormac CY-K500T Teachin Drehmaschine Drehdurchmesser over the bed: 500 mm Basket door diameter: 75 mm Drehlänge: 1000 mm Transport abmessungen (LxWxH) 300x180x210 cm Weight: 2800 kg Steuertyp: Fagor Construction year: 2009 Optionen: Enthält Tools und Dokumentation Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: used, Year of construction: 2001, functionality: fully functional, center width: 1,000 mm, turning diameter over bed slide: 500 mm, For sale is a cycle-controlled lathe of the Gildemeister brand and type NEF 520 K The machine is fully functional, the guides are somewhat worn but still functional Technical data: Gildemeister universal lathe NEF 520K Year of manufacture: 2001 Control: Siemens Touch Panel Rotation Ø over bed: 500mm Rotation Ø over facing slide: 290mm Face travel: 260mm Nwedpjtrmrxsfx Ab Dsp Center distance: 1000mm Drive power 12 KW 1st gear stage 8 - 750 rpm 2nd gear stage 32 - 3000 rpm Quill Ø: 80mm Quill holder: MK5 Quill stroke: 180mm Three-jaw manual chuck: Ø250mm Four-jaw manual chuck: Ø250mm Tool holder: Multifix size C Fixed vice with jaws and rollers, guide Ø10 - 115 On request, loading and transport can be organized for an additional charge All prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: ready for operation (used), functionality: limited functionality, center width: 2,985 mm, turning diameter over bed slide: 830 mm, quill stroke: 200 mm, quill diameter: 125 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working range Center width: 2,985 mm Swing diameter over bed: 830 mm Swing diameter over facing slide: 540 mm Travel of the cross slide: 450 mm Nwjdeu Hi H Sjpfx Ab Dop Displacement of the top support: 250 mm Bed width: 520 mm Face slide width: 280 mm Bed slide guide length: 600 mm Turning tool cross-section: 32 x 32 mm Spindle diameter in the front bearing: 180 mm Spindle holder according to DIN 55027: size 11 Material passage: 130 mm Inner taper of the spindle: metr. 140 Main drive Three-phase motor, infinitely variable Drive power (50/100% ED): 50/37 kW Total speed range: 2 - 1,600 rpm Gear stage I: 2 - 225 rpm Gear stage II: 5 - 559 rpm Gear stage III: 7 - 900 rpm Gear stage IV: 18 - 1,600 rpm Max. Torque at the spindle: 8,750 Nm Speed control: 5 - 200% Load display up to: 125% Feed drive Three-phase servo drives with mechanical safety clutch Longitudinal feed force: 23,880 N Planar feed force: 11,300 N Rapid traverse speed longitudinal/plane: 6.8 / 4 m/min Thread cutting range Longitudinal and taper threads, pitch: 0.001 - 500 mm Tailstock Quill diameter: 125 mm Quill stroke: 200 mm Inner taper: MK 6 Tool equipment Multifix quick-change tool holder: size D Coolant system Pressure: 3 bar Delivery rate: 40 l/min Machine dimensions Length/width/height: 5,200 x 2,110 x 1,915 mm Machine weight Machine as transport unit: approx. 6,500 kg The FX7002 filter visible in the pictures is not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2022.3781-03, turning diameter over cross slide: 365 mm, turning length: 4,000 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens Sinumerik 810 D, TECHNICAL DETAILS Turning length: 4000 mm Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section: max. 20 x 20 mm Faceplate diameter: 560 mm Chuck diameter: 250 - 315 mm according to VDF 6025 Control: SINUMERIK 810 D with screen Workpiece weight with tailstock: max. 1000 kg Workpiece weight with tailstock and 2 steady rests: max. 1600 kg Main spindle Spindle head according to DIN 55 027: Size 8 Spindle diameter in the front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Main Drive Motor type: Continuously variable three-phase AC motor Drive power (60% / 100% duty cycle): 25/20 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3 - 2,500 rpm (2-stage) Constant cutting speed: 1 - 9,999 m/min Feed drives Drive type: Three-phase servo drives (AC motor) Transverse and longitudinal feed range: 0.01-50 mm/rev Max. feed rate (rapid traverse): 5 m/min Conventional rapid traverse, transverse: 2.5 m/min Max. longitudinal feed rate (rapid traverse): 10 m/min Nwodpsv R Hamsfx Ab Dep Conventional rapid traverse, longitudinal: 5 m/min Transverse feed force: 7,100 N Longitudinal feed force: 12,500 N Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Quill inner taper: MT 5 Tip angle, standard: 60° Thread pitch: 0.1 - 2,000 mm MACHINE DETAILS Floor space required: 6.83 x 2.16 m Machine height: 1.98 m Weight: 7,200 kg Total power consumption: 35 kVA EQUIPMENT - Sauter 8-station disc turret - Fixed steady rest - 8 cylindrical shank adapters - Coolant pump - Lubrication pump - Machine stand - Transport base - Main spindle brake - Operating instructions and circuit diagrams

Condition: used, Year of construction: 2007, operating hours: 41,000 h, spindle bore: 165 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 1,200 mm, quill stroke: 400 mm, quill diameter: 140 mm, torque: 8,000 Nm, Technical Specifications ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. turning diameter over bed: 1,200 mm Bed width: 600 mm Spindle bore: 165 mm Spindle head DIN 55027 Gr 15 Chuck: Forkardt 3KS 800 mm Speed range: 1 - 280 / 4 - 900 rpm Gear ratios: 2 Torque: 8,000 Nm Number of turrets: 1 Sauter 4-station head turret for 140 mm chucks Tailstock Quill diameter: 140 mm Quill stroke: 400 Features ----- Nwedpfx Abov Nhxzs Djp Electronic handwheel Forkardt 3KS 800 mm hydraulic power chuck Chip conveyor

Condition: good (used), Year of construction: 2013, functionality: fully functional, quill stroke: 200 mm, quill diameter: 125 mm, spindle speed (min.): 2 rpm, spindle speed (max.): 1,600 rpm, Price reduction - now particularly favorable! Njdou Tquzopfx Ab Dswp No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control system: R&D control system MTCK/EuroTurn Maximum feed force X/Z: 10.1 / 20.7 kN Quick-change holder: Multifix size D Tailstock Quill diameter: 125 mm Maximum quill stroke: 200 mm Taper sleeve: MK6 Filling quantities Central lubrication: approx. 6 l Hydraulic unit spindle and gearbox: approx. 35 l Torque and power 1st gear, 40%/100% ED: 9,287 / 6,136 Nm 2nd gear, 40%/100% ED: 3,906 / 2,580 Nm 3rd gear, 40%/100% ED: 2,516 / 1,662 Nm 4th gear, 40%/100% ED: 1,058 / 699 Nm Power 40%/100% ED: 56 / 37 kW Speeds 1st gear: 2 - 137 rpm 2nd gear: 5 - 213 rpm 3rd gear: 17 - 505 rpm 4th gear: 58 - 1,600 rpm Reduction ratio Belt: 1.992 1st gear: 13.079 2nd gear: 5.500 3rd gear: 3.543 4th gear: 1.490

Condition: new, Year of construction: 2025, CNC control Fagor or Siemens delivery time approx 4-5 month Including normal equipment: - electrical equipment 24/230/400V german fabrication (CE-Norm) - machine lamp 24Volt - cooling unit - steel holder, 4-fold, incl. upper support - 4-chuck faceplate 1000mm - Savety housing - central lubrication SKF/Vogel -1 set technical documentation, including: -- Operating manual -- circuit diagramm -- programming manual -- decleration of conformity (CE) - machine painting combination RAL 7035 and RAL 5015 Technical specifications Workpiece diameter over bed: 1000mm Working diameter over bed:1000 mm Nwsdpfx Absdag Svj Dop Working diameter over support: 650mm length between centers: 5000mm Max. weight of workpiece, withoit steady rest: 8000 kg Spindle head DIN 55026: Gr.15 spindle bore: 128mm Spindle inside cone(metrisch): 140 Performance of main drive: 22/30* kW spindle speed: 5-500U/min Turning speed steps (manual / stepless within steps): 24 max. spindle torque:9500Nm Machine dimensions: Length: 8200mm Width: 2400mm Height: 2000mm Weight: 15750kg * option

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 020564, turning length: 2,980 mm, turning diameter: 660 mm, spindle bore: 90 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, total height: 2,000 mm, total length: 6,510 mm, total width: 2,370 mm, quill diameter: 100 mm, quill stroke: 200 mm, swing diameter over cross slide: 400 mm, turning diameter over bed slide: 433 mm, workpiece weight (max.): 2,000 kg, overall weight: 5,300 kg, We are offering our cycle lathe for sale here. This is a bad investment that we never put into operation. * CNC control Siemens 810 D * Automatic 8-position SAUTER turret, tool holder VDI 40 * 3-jaw power chuck, diameter 300 mm * Chip conveyor Njdpfxowycnqs Ab Dewp * 2 steadies * Central lubrication * Mahle changeover filter system

Condition: new, Z-MaT CNC/Cycle Lathe FTL660-2000mm Control: Siemens 828D Shop Turn, 15" Touch Flat bed with linear roller guideways and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Tooling 12-position servo turret Tailstock Hydraulic tailstock MK5 Quill stroke: 100 mm Tailstock travel: 1850 mm (manual) Njdpfxswwt Trs Ab Djwp Axes X-axis travel: 370 mm Z-axis travel: 2000 mm X/Z-axis rapid traverse: 15/15 m/min Bed type/guides: box bed/linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be displayed at EMO, Hall 12/D10, and will be available immediately afterwards. Further sizes of this series can be found in the PDF.

Condition: used, Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 435 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 640 mm, center width: 1,500 mm, turning diameter over bed slide: 640 mm, swing diameter over cross slide: 435 mm, quill stroke: 190 mm, quill diameter: 100 mm, quill travel distance: 190 mm, center height: 320 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, swing diameter over bed slide: 640 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, feed length X-axis: 365 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, bed width: 1,800 mm, workpiece weight (max.): 1,600 kg, type of input current: AC, travel distance cross slide: 365 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 315 mm, torque: 640 Nm, travel distance X-axis: 365 mm, travel distance Z-axis: 1,500 mm, workpiece weight between centers: 1,600 g, spindle diameter: 100 mm, workpiece diameter between centers: 640 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Model: VDF Boehringer DUS 630 Swing diameter over bed: 640 mm Swing diameter over cross slide: 435 mm Travel of cross slide / top slide: 365 mm / 145 mm Center height over flat bed: 320 mm Distance between centers: 1,500 mm Cross slide dimensions (W x L): 265 x 630 mm Top slide dimensions (W x L): 220 x 425 mm Turning tool section: 32 x 25 mm Spindle bore: 70 mm Front spindle diameter: 100 mm Max. torque (40% / 100% duty cycle): 1,600 / 640 Nm Speed range (overall): 3–2,500 rpm Gear stages: 2 Constant cutting speed: 1–9,999 m/min Feed range transverse/longitudinal: 0.01–50 mm/rev Njdpswywxdefx Ab Dswp Max. feed rate transverse/longitudinal: 10 m/min Rapid traverse transverse/longitudinal: 5 m/min Feed force transverse/longitudinal: 12,500 N Metric thread pitches: 0.1–400 mm Quill diameter / stroke / taper: 100 mm / 190 mm / MT5 Faceplate: Ø 630 mm Setover tailstock center: Ø 150 mm Workpiece weight (max.): Between centers: 400 kg With tailstock & 2 steadies: 1,600 kg Display: 10.4" color LCD, showing (among others) spindle speed, feed rate, position, tool, load

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length Nodowgbuiopfx Ab Dewp - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: good (used), Year of construction: 2008, operating hours: 7,840 h, functionality: fully functional, machine/vehicle number: 3212.08, turning diameter over cross slide: 260 mm, spindle bore: 106 mm, turning length: 2,000 mm, turning diameter: 475 mm, center width: 2,000 mm, turning diameter over bed slide: 475 mm, CNC LATHE – Cycle Lathe CD480 Manufacturer: DMT Kern Model: CD480 x 2000 Control: HEIDENHAIN "MANUALplus 620" Year of manufacture: 2008 Condition: Good / Very good Operating hours: 7,840h Scope of delivery: Nwjdpfx Abew Exlvj Dsp - Original documentation - Tailstock - Automatic twelve-position turret with driven tools Tool mounting DIN 69880, Q5 30mm, mounted on the rear cross-slide - Additionally, Multifix B at the front - Main spindle with DIN 55026/A8 mount, bore 106mm, spindle bearing diameter at the front 140mm - Special speed range, max. 2,500 rpm - Fixed steady rest with roller jaws - … and many other factory-fitted special features (see description) - Tool holders, various lathe chucks, mounts for the tool turret, driven tools etc. can be purchased as an extra package and are not included in the main machine delivery!

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 002092059405, TECHNICAL DETAILS x-way: 360 mm z-way: 2000 mm speed range: 1800 rpm center height: 340 mm turning diameter: 680 mm Nedpfx Asmkhlpjb Dewp Control: Fanuc 21i-T tool holder: Parart turning length: 2000 mm tailstock: KM5 chuck diameter: 315 mm spindle bore: 104 mm MACHINE DETAILS Machine weight: approx. 6.3 t Parts total: 174.782 pieces Control switch-on time: 26,457 h Automatic time: 241 h Feed time: 5,846 h

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC cycle lathe Year of manufacture: 2003 Control: Fanuc 210i-T Spindle bore: 102 mm Chuck: 315 mm Turret: 4-position Travel: X 300 mm / Z 2,000 mm Turning diameter over bed: 500 mm Turning diameter over support: 300 mm Nodpfxjwww Ndo Ab Djwp Tool package: 32 tool holders Various accessories, documentation