Used Spinning Lathe for sale (6,014)

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. Gsdpfx Alouqb Ems Uekc The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces Gedpfx Ajvtp Edjl Uokc >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: Gkedpfxou Aftgs Al Ujc >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm Gkodpfx Ajvivmyel Uec >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] Gkjdpfxouhauyo Al Usc - maxi spindle speed : 6 300 [rpm] - machine equipped with 28 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - KNOLL VRF 500 chips conveyor - Parts catcher with conveyor in position 6

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Gsdpfx Asxyvaqol Uokc Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: good (used), Working diameter Ø 2400mm Gksdpfxsucdh Ts Al Uec Max sheet thickness: 9,5 mm

Condition: used, Year of construction: 1991, Technical details: number of spindles: 6 spindle passage: 51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 Gksdpsl Rmqpefx Al Uec screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder Godpfxevv Etvs Al Ujkc >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: used, TECHNICAL DETAILS Gkjdeyzi Umspfx Al Ujc - Number of spindles : 6 - Number of counter-spindles : 1 SPINDLES - Max. bar diameter : 22 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 8.5/15 [kW] NUMERICAL AXES - Slide unit 1.1 : X and Z axes controlled by NC - Slide unit 1.2 : Z controlled by NC - Slide unit 2.1 : Z controlled by NC - Slide unit 2.2 : X and Z axes controlled by NC - Slide unit 3.1 : X and Z axes controlled by NC - Slide unit 3.2 : X and Z axes controlled by NC - Slide unit 4.1 : X and Z axes controlled by NC - Slide unit 4.2 : X and Z axes controlled by NC - Slide unit 5.1 : X and Z axes controlled by NC - Slide unit 5.2 : X and Z axes controlled by NC - Slide unit 6.1 : Z axis controlled by NC - Slide unit 6.2 : X and Z axes controlled by NC POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 77 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3329 x 2032 [mm] - Machine height : 2654 [mm] - Machine weight : 7100 [kg] MACHINE HOURS - Number of hours under power : 36508 [h] - Number of working hours : 26721 [h] - Number of spindle hours : 20860 [h] EQUIPMENT - CNC : Siemens 840D SL - Cutting force monitoring: ARTIS - Chips conveyor - Coolant tank * with high-pressure pump : 80 [bars] - Bar loader : IEMCA SIR mS22P/33 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Gkodpfxoxziuwe Al Uoc Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Year of construction: 2018, condition: ready for operation (used), A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible. Gksdpfxsu Dm Izs Al Usc

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Godpexxm A Hsfx Al Uokc Tool holder Steadies Live centre

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible. Gkedsxaphnjpfx Al Usc

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible. Gkedpfsxaphuox Al Usc

Condition: used, Multispindle lathe GILDEMEISTER AS 20 Gksdpfxoz I Ur Ee Al Uoc

Condition: used, Multispindle lathe GILDEMEISTER GS 20 Gkodpfx Alsz I Utco Usc

Condition: used, Multispindle lathe GILDEMEISTER AS 48 Gkjdpfx Aljz I Ut Ne Uoc

Condition: used, Multispindle lathe GILDEMEISTER AS 32 Gkjdpez I Utpsfx Al Ujc

Condition: used, Cnc multispindle lathe INDEX MS16C Gjdpsztk A Tsfx Al Uekc

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! EQUIPMENT Prepared as a double 3-spindle machine Part pick-off device Gkodpfx Aljyx Tzre Ujc Thread cutting gearbox Cucci Giovanni integral loader Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015)

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Year of manufacture 2015 Gsdpjvq Ibxefx Al Ujkc Acu Rite digital readout Machine lamp Coolant tank Longitudinal stop Rear chip guard Chuck guard

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm Gedpfov Hckgox Al Uskc - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: used, Multispindle lathe GILDEMEISTER AS 20 Gkodpfx Alez I Ur Sj Ujc

Condition: used, Multispindle lathe SCHÜTTE AF32 S DNT Gkodpfx Alez I Ut Aj Uec