3d press buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Membrane Press make Buerkle type Multifoiler BTF for coating of profiled work pieces with foil foil width 1450 mm previously used for PVC and high-gloss foils suitable for dispersion adhesives 2f9x9c08w consisting of: paternoster with 11 rolls + spare axis with integrated unwinding and cutting device table press turning station behind the machine more
2
Manufacturer: Kaeser Type: FC-283D pressure: 16 bar Temperature: 1-66 C It can be connected to a tube with 80 mm diameter. Filter performance: 28.3 m3 / min Lmh8l more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Sshgmo DIMTER PROFIPRESS L2500HF RF Press with Automated Infeed -- Press area (bed size) 100" x 48" with Pressing time from approx. 1 Min depending on wood and type of glue. Panel lengths 16" - 100", Panel width max. 48" and panel thickness 0.5"- 3.25". -- Generator: 20 kW RF Generator with average press time approx. (1) minute. -- Hydraulic Raise & Lower of Top Platen via (2) two Jack-Screws. -- Pusher: Multi-Functional Pusher driven By 3/4 HP MotorRequ... more
6

Electric Heated Press Interwood HEP

Oldham, Manchester United Kingdom
5727 km
1971
USED
078zqkgiq8ft x 4ft Single daylight HEP Press more
6
Bkvnunxused Bruderer BSTA 20E high speed punch press. Year of manufacture 1985. Partially overhauled 2016. Country of Origin Switzerland. 20 ton capacity. Adjustable stroke 8 to 38 mm. Speed range 100 to 1800 SPM max. Tool clamping area 380 mm x 220 mm between pillars. [Total bolster area 560 x 400 mm.] Single Roll feed BBV 190/85 fitted on the left-hand side. Max width of strip 160 mm. Power supply 380 Volt, 50 Hz. more
1
Vertical edge press Electrical heating bar underneath 2gxaxngiz 4 hor. Clamps 2,5 m capacity more
4
pressure:80 t chamfer lenght:2550 mm distance between columns:2060 mm control:DNC 800 back stop - adjustable:1000 mm table width:240 mm column arm:250 mm stroke max.:200 mm dayligth:450 mm stroke speed - idle stroke downwards:120 mm/s stroke speed - under load:14 mm/s stroke speed - idle stroke upwards:105 mm/s operating pressure:235 bar Ykhrjfeon quantity of oil:250 l total power requirement:11 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:3,0 x 2,0 x 2,9 m more
4
Albert Frankental is a 100% subsidiary of KBA. Machine is made in Germany. Srufds Machine No.: n/a more
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Swqrk3oj WEMHONER "Variopress Universal 2000" Membrane Press with (1) Shuttle Table & Automatic Pin System: with automatic foil cutting and automatic foil lay down system. For 3D applications with moderate capacity, the use of the VARIOPRESS® Universal 2000 is recommend which provides an excellent flexibility in the production of high gloss surfaces, radius fronts or for 3D veneer applications. -- Press Type : Variopin Universal 2000 L- shuttle syste... more


3d press
every day

New machines via email!

Be informed!
3
1 x used Eccentric Manufacturer: BBT Type: E 55 Year: 1962 Weight: 6 to. Technical specifications: pressure force: 55 tons. Adjustment stroke of delivery: free loaded payment: before collection Dgjujqh more
4
Reducer, Druckrregler, pressure gauge br / br -for nitrogen / -Eingangsdruck: max. 200 bar br / -Ausgangsdruck: 0 - 50 bar adjustable br / -1x reducer available br / -Price per piece br / -Weight 1.6 kg / piece S0yhxxrmt more
5

Lot of Frame presses -

Düsseldorf Germany
6383 km
USED
Offer
Another 10 days
Dimensions (l x w x h) approx.: 600 x 500 x 300 mm Weight approx.: 10 kg Description: See photos. Yrggfk In Online Auction with approx. 194 further Machine Tools and other Assets! Bidding ends: Wednesday, 05 July 2017 from 9am (local time) Auction start price: EUR 230 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more
3

Hydr. pressbrake LOTZE PZ 100 x 3500

Niederlangen Germany
6339 km
1981
USED
pressure:100 t chamfer lenght:3500 mm distance between columns:3050 mm Xmrbueerd stroke:315 mm throat:200 mm table height above floor:760 mm total power requirement:11 kW weight of the machine ca.:12 t dimensions of the machine ca.:4,1x 1,7 x 2,9 m more
6
pressure 400 t stroke 60-200 mm ram adjustment 135 mm strokes per minute 24 min table: 1380 x 960 mm Jrlcrw8s ram surface 1000 x 700 mm throat 480 mm depth 3800 mm width 1400 mm height 3800 mm total power requirement 30 kW weight of the machine ca. 30 t more
1
Elect./Voltage: 400 V, 50 Cy, 3 Ph. Lwxgp Platen dimensions 78.73" x 35.43" (2,000 x 900 mm); Designed for lamination of pre-shaped & glued panels with Veneer, PVC & Polypropylene films with the use of a membrane; works well with thick PVC and especially well with Veneer since it applies positive, direct pressure to the profiled/contoured surface. This concept allows for cycle times as short as (2.5 - 3) Min depending on the Veneer thickness. -- Feed Through Press style "flame cut" steel fra... more
3
HEUFT ultimate deck oven gas 5 floors ca. 122 x 202 x 23 cm (W x D x H) Baker State Sn2mxwhh    HEUFT floor oven baking 5-storey analog circuit Operation can be equipped with gas, but also with oil burners 2 Kari All baking tray sizes can be used. The oven is tested in the Baker State but to function. He stands in a Cologne bakery, where he gladly can be visited on request before buying and tested. If you are interested please appointment. We like to make the oven for you at an... more
5
Refrigeration compressor, compressor refrigeration compressor -Volumenstrom m / h -Temperature -35 C - +46 C -Verdichterenddruck 20 Bar -2x compressors -1x cooler -Dimensions 1420/730 / H880 mm -Weight 216 kg I0n9qelao more
5

Compressor MEHRER F 37-10

Düsseldorf Germany
6383 km
1988
USED
Offer
Another 4 days
Dimensions (l x w x h) approx.: 1000 x 900 x 1500 mm Weight approx.: 400 kg Description: MEHRER F 37-10 Compressor In Online Auction with approx. 81 further Machine Tools and other Assets! 8lul93yaw Bidding ends: Thursday, 29 June 2017 from 10am (local time) Auction start price: EUR 250 (plus VAT and 15% buyers premium) Your contact person: Hennadii Chernyshuk more

Hydr. pressbrake BEYELER RT 50 x 2050

Niederlangen Germany
6339 km
1992
USED
pressure:50 t chamfer lenght:2050 mm distance between columns:1550 mm throat:255 mm stroke:165 mm work height max.:960 mm Ylkywvhqu ajustment speed:90 mm/sec working feed:6 mm/sec return speed:70 mm/sec dayligth:360 mm back stop - adjustable:500 mm quantity of oil:85 l total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:2,3 x 1,7 x 2,7 m - hydraulic upper tool clamping - R- axis - crowning - div. tools - 4 stop fingers - 2x metal sheet more
1
pressure 063 t throat 250 mm stroke 16-90 mm ram adjustment 50 mm strokes of ram per min. 110 dayligth 450 mm table-size 750 x 500 mm ram surface 330 x 220 mm total power requirement 16-90 kW Yoauf7bmx weight of the machine ca. 4 t dimensions of the machine ca. 1,5 x 1,8 x 2,2 m more
1
Elect./Voltage: 7hcotuopd WEMHONER "VARIOPRESS" Model "Basic 1000" - Type KT-MB-28/15-240 with 2,800 mm x 1,500 mm overall platen [...] operating area 2,540 mm X 1,300 mm. Press system, Hydraulic single -daylight upstroke press. -- Press body consisting of: Steel frames bolted together to form a closed unit. Each frame manufactured out of a single piece. Aluminum heated platens, top and bottom. Press can operate with or without membrane; this press comes with a membrane. -- Total pressure... more
6
pressure 500 t Eivsjn7t throat 2200 mm stroke 500 mm table surface area 2000X1800 mm Daylight max 2500 total power requirement 55 kW weight of the machine ca. 6x3x8,5 t dimensions of the machine ca. m more
5
Drill, drill press, Pillar drill, drill press -Tischgrösse 260 x 255 mm -Spindelaufnahme MK2 unloaded 260 mm -Drehzahlen 200-1200 U / min columns 95 mm -Spindelhub 110 mm -VIP gear -Dimensions 410/800/230 H1950 mm -Weight kg Lmznn more
5

Lot of Frame presses -

Düsseldorf Germany
6383 km
USED
Offer
Another 10 days
Dimensions (l x w x h) approx.: 600 x 500 x 300 mm 8kuocm3rr Weight approx.: 10 kg Description: See photos. In Online Auction with approx. 194 further Machine Tools and other Assets! Bidding ends: Wednesday, 05 July 2017 from 9am (local time) Auction start price: EUR 240 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more
5

Hydr. pressbrake COLGAR PI 8071

Velen-Ramsdorf Germany
6363 km
1981
USED
pressure 800 t chamfer lenght 9100 mm Cqzewgtc distance between columns 7040 mm control PGR 327 Colgar dayligth 650 mm throat 800 mm back stop - adjustable 1000 mm max. ram stroke 50 - 325 mm total power requirement 55 kW weight of the machine ca. 120 t dimensions of the machine ca. 10 x 4 x 5 m The total machine consists of 2 separate machines in the tandem processing works. Each machine has a Chempfer length 9100mm, and a pressure from 800t. All indicated values refer to the total machin... more
5
Good running used Volvo engine (diesel) type D3D CDE2 50 kW at 2300 rpm Mxn7z We have a wide range of new and used engines in stock. Please do not hesitate to contact us for pricing or availability. more
1
Elect./Voltage: 380 V, 50 Cy, 3 Ph. Lwyfx Designed for lamination of pre-shaped & glued panels with Veneer, PVC & Polypropylene films with the use of a membrane; works well with thick PVC and especially well with Veneer since it applies positive, direct pressure to the profiled/contoured surface. This concept allows for cycle times as short as (1.5 - 2) Min depending on the Veneer thickness. -- Manual loading/unloading tray "flame cut" steel frames; platen dimensions: 2300 mm X 900 mm (90.5"... more
6
pressure 1350 t distance between columns 2100 mm ram stroke 1300 mm pressure of ram 450 t pressure of blank holder 900 t stroke of drawing ram 1300 mm stroke of blankholder 1300 mm ram surface 2100x2100 mm table surface area 2100x2100 mm closing speed 250 mm/sec working feed 21 mm/sec return speed 200 mm/sec return capacity 110 t pressure of ejector 100 t ejector speed 2500 ejector stroke 600 mm total power requirement kW Yku2yhxhe weight of the machine ca. t dimensions of the machine ca. m... more
5
Reducer, Druckrregler, manometer -für nitrogen -Eingangsdruck: max. 25 bar -Ausgangsdruck: 0 - 1,5 bar adjustable regulator available -1x prize per piece -Weight 1.3 kg / piece Sgts22a7q more
5

Electrical Wobble Riveting Press FMW HN 3 - 293

Düsseldorf Germany
6383 km
1977
USED
Offer
Another 18 days
Dimensions (l x w x h) approx.: 750 x 900 x 1800 mm Weight approx.: 250 kg Description: - Inventory No.: 3247 - 2,2 kW, 4,9/8,4 A, 220/380 V - 2880 rpm - on base rack - Euro pallet can only be handed out against exchange pallet - for further information see photos - Hall 1 In Online Auction with approx. 75 further Machine Tools and other Assets! Bidding ends: Thursday, 13 July 2017 from 10am (local time) 8m7f77fbu Auction start price: EUR 150 (plus VAT and 15% buyers premium) Your conta... more
5
pressure 10 t throat 260 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 630 mm table surface area 450 x 400 mm hole in the table 180 mm table height over floor 700 mm speed down 0,08 m/sek. speed up 0,18 m/min power requirement 1,6 kW Wgju93kuc weight of the machine ca. 1,1 t dimensions of the machine ca. 1,2 x 0,5 x 2,4 m more
6
Briquetting press new - demonstration/showroom machine - new 8nvmgl7k0 - motor power 7,5 HP (5,5 kW) IE2 (High Efficiency) - silo diam. 1000 mm - volume cap. 0,73 m³ - briquettes diam. 55 mm - production up to approx. 60 kg/h - voltage 3*400 – 50 Hz - approx. 7 cycles/min. more
1

PRESS (FORGING) KOJIMA 9000 TON

Charlotte, North Carolina United States
521 km
2008
USED
Elect./Voltage: Zahxnotzj 2008 9,000 TON KOJIMA (JAPANESE) HYDRAULIC HOT FORGING PRESSSpecifications: -- 9,000 Ton Capacity -- 4-Post Down Acting Type -- 51” Stoke -- 98” X 71” Bed Area -- 106” Day Light -- Rolling Bolster -- Speed: Rapid Down 236 IPM to 378 IPM -- Pressing: 7 IPM to 22 IPM -- 40 Ton Hydraulic Knock-Out Upper Slide, 59” Stroke 354 IPM -- 100 Ton Hydraulic Knock-Out Lower Slide, 11.81 Stroke 354 IPM -- 20 Ton Weight Capacity Of Rollin... more
6
pressure 160 t chamfer lenght 3500 mm distance between columns 3150 mm control Delem total power requirement kW weight of the machine ca. 10 t dimensions of the machine ca. m W3xb0kyt more
4
Reducer, Druckrregler, pressure gauge br / br -for forming gas / -Eingangsdruck: max. 200 bar br / -Ausgans: Flow meter br / -2x reducer available br / -Price per piece br / -Weight 1.8 kg / piece S0yhoglys more
5

Lot of Frame presses -

Düsseldorf Germany
6383 km
USED
Offer
Another 10 days
Dimensions (l x w x h) approx.: 600 x 500 x 300 mm Weight approx.: 10 kg Description: See photos. 8kuny2w7q In Online Auction with approx. 194 further Machine Tools and other Assets! Bidding ends: Wednesday, 05 July 2017 from 9am (local time) Auction start price: EUR 240 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more
1
1 color offset press Heidelberg MO-E + N+P 8pkf9wyua 48 x 64 cm convent. dampening numbering and perforating unit excellent condition more
4
ORMA solid wood press OSAMA glue dosing machine - year of construction 2000 (revision in 2015) - power 23 kW - voltage: 3 x 400 v - plate dimensions 2500 x 1300 mm - electric heater for thermal oil 8nu3998nh more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Uxiyapiko ITALPRESSE Formatic 259-PS Membrane PressDesigned for lamination of pre-shaped & glued panels with Veneer, PVC & Polypropylene films with the use of a membrane; works well with thick PVC and especially well with Veneer since it applies positive, direct pressure to the profiled/contoured surface. This concept allows for cycle times as short as (1.5 - 2) Min depending on the Veneer thickness. -- Feed Through Press style "flame cut" steel frames; pl... more
3
Compact briquetting press in with silo incorporated Capacity: 30 to 50 kg/hour Briquette sizes: 50 mm diameter Smbxj3ln0 Main motor: 4 kW Silo diameter: 900 mm. Total power installed: 5,5 kW Overall sizes: 1,27 x 1,75 x 1,54 m. Weight: 960 kg. Additional equipment or options: upon demand more
5
Proportional pressure control directional valves, solenoid valve, pneumatic valve, air valve, pressure relief valve operating pressure 0-6 bar-3x valves available-price piece-Dimension 110/45/H55 mm Weight 0.4 kg Rt3mbxjs3 more
5

Lot of Frame presses -

Düsseldorf Germany
6383 km
USED
Offer
Another 10 days
Dimensions (l x w x h) approx.: 600 x 500 x 300 mm 8kuol8cfs Weight approx.: 10 kg Description: See photos. In Online Auction with approx. 194 further Machine Tools and other Assets! Bidding ends: Wednesday, 05 July 2017 from 9am (local time) Auction start price: EUR 240 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more
6
GA50 VSD FF Second hand compressor Mxi27 more
5
compressive force 25 to jib working radius 350 mm stroke 500 mm operating pressure max. 125 bar *two-hand operation / UVV* greatest measure between ram and table 800 mm Cn3x7ge3 table size 500 x 500 mm ram surface 250 x 250 mm T-slots 18 mm outlet in the table 180 mm intermediate plate 490 x 490 mm height of intermediate plate 100 mm outlet of the intermediate plate 115 mm electrical data 380V / 8KW space requirements width - 800 x depth - 1,350 x height - 2,500 mm weight approx.... more
1
Elect./Voltage: 220/240 V, 60 Cy, 3 Ph. Gots2i7 SHAW ALMEX - TL-4-4-5V, [...] Table Membrane [...] Press - Thermo-Laminating, membrane or membraneless operation for veneer [...] Specifications: -- Constructed with 2-1/2" thick Steel Frame; 52" wide dual tray shuttle infeed for loading-and-unloading, 54" x 69-3/4" aluminum top platen with clamped on membrane. -- 42" x 60" Max. part size for full wrap, 1-1/4" (32 mm) max. part thickness. -- Top platen & infeed lower tray: Resistance Silico... more
6

Corpus press Imotech IMO 324

Petershagen Germany
6471 km
1997
USED
Manufacturer: Imotech, Type: IMO 324, Year: 1997 ca., Body presses assembly line: yes, Work piece width min-max mm: 650, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 2000, Pre-assembling conveyor: 3 m, Glazing tape: 3 m, Press: IMO 324, FREE TEXT: einschl. Puffer, Querförderer und Rückführung , Year :1997 ca. Bl9pd3yow more
5
Reducer, Druckrregler, pressure gauge br / br -for oxygen / -Eingangsdruck: max. 200 bar br / -Ausgangsdruck: 0 - 12 bar adjustable br / -1x reducer available br / -Price per piece br / -Weight 1.4 kg / piece S0yhevger more
5

Lot of Frame presses -

Düsseldorf Germany
6383 km
USED
Offer
Another 10 days
Dimensions (l x w x h) approx.: 600 x 500 x 300 mm Weight approx.: 10 kg Description: See photos. Y0xlzl In Online Auction with approx. 194 further Machine Tools and other Assets! Bidding ends: Wednesday, 05 July 2017 from 9am (local time) Auction start price: EUR 230 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more
6
Oil free Atlas Copco 8nwzgno2r more


3d press
every day

New machines via email!

Be informed!

to

to

Change search
3D PRESS
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try out the Machineseeker app now!
Machineseeker app for iPhone and Android.