Used 3D Scanner for sale (1,869)

Condition: excellent (used), Year of construction: 2014, We are offering a high-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Completely ready for connection, including all cables Note: The PC is password-protected, but the software is included on CD Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x... Set 1000x800 Complete GOM PC system in an aluminum case (running Linux), fully configured for the GOM ATOS IIe Ppedpfx Aqszpwg Rjvjw Software on CD; steel scale bars with ATOS evaluation dongle Replacement lamp Calibration panel (aluminum) CP20/MV 350x280 mm² Please feel free to contact us if you have any questions!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, warranty duration: 3 months, This complete used package includes: 1 Leica BLK 360 scanner, 2021 model. 3 Batteries. 1 Charger. 1 Tripod. 1 Carrying case. Firmware updated, scan data can be downloaded via Wi-Fi and USB. In very good condition! 3-month warranty. Calibration certificate. Ppodpszgw Ipefx Aqvew 💥 €8,500 (excluding VAT) 💥 VAT recoverable. Delivery possible throughout Europe.

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring head Light Sources Light source for observation: LED ring light (red, blue, green) Light source for measurement: White LED Controller: VR-5000 Observation and Measurement Range Macro mode Magnification (based on a 15-inch monitor): 12×: Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25×: Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38×: Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50×: Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode Magnification (based on a 15-inch monitor): 40×: Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80×: Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120×: Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160×: Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Height Measurement Measurement resolution: 0.1 µm Height measurement range Without image stitching in Z Macro mode: 10 mm Micro mode: 1 mm With image stitching in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Pjdjzimlpspfx Aqvepw Width Measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image Stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setting Measurable XY area 206 x 104 mm Object table XY travel: 184 × 88 mm (motorized) Z travel: 73 mm (motorized) Load capacity: 4.5 kg Working distance: 75 mm Image acquisition element 4-megapixel CMOS, S/W Transmitter lens Double telecentric lens x 2 Receiver lens Double telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power connection Voltage: 100 to 240 V AC, 50/60 Hz Power consumption: Max. 200 VA Environmental resistance Ambient temperature: 15 to 30 °C Relative humidity: 20 to 80% RH (no condensation) Weight: approx. 28 kg (weight of the measuring unit only: approx. 11 kg) Distance extension object table Observation software VR-5000 Version 3.3.5.75 Image stitching module VR-H3J Creates a single large image from a series of images taken with the observation software. You will see color images. Analysis extension module VR-H3CA Expands the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: used Scope of delivery: (as shown in the pictures) (Changes and errors in the technical data, information provided are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), A portable optical Creaform 3D laser scanner is offered. Accuracy: 0.03mm, volumetric accuracy: 0.02mm + 0.06mm/m, resolution: 0.05mm, measurement rate: 480000/s, scanning area X/Y: 275mm/250mm, stand-off distance: 300mm, depth of field: 250mm, weight: 0.85kg. Including HP ZBook, Windows 10 and approx. 50 packs of positioning targets. Calibration at Creaform passed on 16 December 2020. Inspection possible by appointment. Podezmh S Sopfx Aqvopw

Condition: used, In this offer you purchase a used dental 3D scanner ‘CADstar CS Neo’ Object of sale: Ppedpfx Ast H Eudjqvsw 1 x CADstar CS Neo with the following equipment: incl. calibration body incl. holder + arti base incl. PC Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, warranty duration: 6 months, Shining 3D FreeScan Combo – Metrology System / 3D Scanner We are offering a new Shining 3D FreeScan Combo unit manufactured in 2023. The device has only been demonstrated to customers on a few occasions. Aside from that, it is in like-new condition, fully functional, and ready for use. Podozk E D Tjpfx Aqvepw The scanner is covered by a 6-month seller's warranty. For any questions or additional information, please contact us via message or phone.

Condition: used, functionality: fully functional, total length: 262 mm, total height: 158 mm, total width: 158 mm, overall weight: 1 kg, Artec Eva professional 3D scanner, tested and fully functional. Handheld scanner with white structured light technology (LED), ideal for scanning medium and large objects with high-quality color capture. KEY FEATURES: - 3D resolution: up to 0.2 mm - Accuracy: up to 0.1 mm - Capture speed: 16 FPS (up to 2 million points per second) - Technology: white structured light (safe for scanning people) - Color scanning with 1.3 MP texture - Working distance: 0.4 - 1.0 m - Weight: 0.85 kg (portable, handheld) - Power: 12V DC 2A - Manufactured in Luxembourg - Includes original carrying case and cabling Pedpoy U H Rxsfx Aqvepw APPLICATIONS: medical sector (body scanning, orthopedics, prosthetics), automotive (reverse engineering of medium-sized parts, dimensional control), heritage and museums (sculptures, archaeological artifacts), sports and technical apparel (human body scanning, custom helmets), forensics and criminology, VFX, and video games. The Artec Eva is the world’s best-selling portable 3D scanner thanks to its combination of accuracy, ease of use, and versatility. Unit sourced from a professional service bureau. Available for demonstration before purchase. Location: Spain. Easy shipping throughout Europe. Please inquire about the type of Artec Studio software license and included accessories.

Condition: good (used), functionality: fully functional, Creaform Go! Scan Spark 3D scanner for precise digital capture of objects. The scanner can operate with or without reference markers. The scanner can capture the color/texture of objects. The system is housed in a case and can be used in mobile applications. The offer also includes a high-performance laptop with 128 GB of RAM, on which the scan software with a permanent license is installed. - Accuracy: up to 0.05 mm - Volumetric accuracy: up to 0.05 mm + 0.1 mm/m - Resolution: up to 0.1 mm - Used unit, year of manufacture 2022, in perfect working order and can be tested while powered on. Ppedpfxjziqqie Aqvsw - Includes laptop with VXElements scan software. This offer is only valid as long as the used unit is still available – please contact us for more information.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 50 kg, type of input current: AC, overall weight: 65 kg, table load: 50 kg, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, We are offering this very well-maintained KEYENCE VL-500 3D line scanner, manufactured in 2021. Manufacturer: KEYENCE Model: VL-500 Year of manufacture: 2021 Condition: very good Category ID: 402 Type ID: 1927 Machine type: 3D line scanner Included in the offer: 1 unit of control unit, part no. VL-500 1 unit of 500 mm base, part no. VL-550 1 unit of measuring head, part no. VL-570 1 unit of accessories, including calibration plate, user manuals, part no. VL-A2D 1 unit of cover, part no. VL-C2 1 unit of Win10 PC for VL-500 series, part no. 972337 1 unit of comparative measurement module, part no. VL-H2P Ppsdpfsy U Ngcsx Aqvjw 3 units of AC power cables, part no. OP-99031 Condition is very good, as the scanner has rarely been used. Also included: Calibration certificate valid until 2025. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SK02UXKP0579, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, overall weight: 1 kg, repeat accuracy: 0.02 mm, Equipment: documentation/manual, ZEISS T-SCAN hawk metrology laser 3D scanner with accuracy 0,02mm + 0,035mm/m with 3 scanning modes (Standard - 7 red crosses, Fine - 5 blue lines, Single red line for deep holes). Manufacturing year 2022. Fully functional and ready to use. Included: 3D scanner Calibration panel Powerful Dell mobile workstation still under Dell Pro Support Warranty Software GOM/ZEISS Inspect 2021 licence on USB drive Rigid travel case Laptop bag All original documentation included Inspection under working conditions possible. ZEISS INSPECT 2021: • Opening and editing new and existing projects • Import of point clouds and polygon meshes • Creation, editing, and processing of polygon meshes • Construction of elements: basic geometries, points, sections, curves, surfaces, dimensions • Import of CAD data in standard formats: IGES, VDA, STEP, JT Open, STL, PLY Ppedeyxy Sdspfx Aqvsw • Use of common alignment methods • CAD comparison with color deviation mapping • Dimensioning and evaluation of form/position according to ISO GPS and ASME Y14.5 • Reporting module Delivery

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: SK03UT6P0097 / SK01TMFY3097, type of input current: AC, input voltage: 230 V, The 3D laser scanner Trackscan Sharp49 offered here is a mobile, tracker-based 3D scanner, manufactured in 2023, with an original price of €100,000.00. Its special feature is that it allows you to digitize components without having to attach targets to the component. This is possible because targets are already located on the housing of the laser scanner and are registered by the tracker unit. This measuring device is very suitable for the rapid digitization of large components of several meters in size, while maintaining a relatively good level of accuracy. Pjdpfxow Id E Ej Aqvopw The device was calibrated in an ISO 17025 accredited laboratory upon delivery. We recommend having the manufacturer perform a calibration upon taking possession of the device. The scan software is included in the offer. Optionally available is a touch probe for tactile point measurement on objects and a laptop. An excerpt of possible application areas: - Digitization of manufactured components for subsequent metrological evaluation, e.g. as part of initial sample tests - Digitization of objects/spare parts for subsequent reverse engineering, e.g. for the production of a spare part or design changes - Digitization of larger machine systems and room areas for planning and simulation purposes - Digitization of vehicles in the tuning sector Technical specifications: 3 laser modes Scan rate: Up to 2,600,000 measurements/s Volume accuracy: at 10.4 cubic meters: up to 0.049 mm at 28.6 cubic meters: up to 0.067 mm at 49.0 cubic meters: up to 0.089 mm Recommended component size: 0.1m - 12m Weight, tracker case fully loaded: 37 kg Weight, scanner case fully loaded: 21 kg Weight, tracker unit: 6.8 kg Weight, scanner unit: 1.75 kg The device can be inspected while powered on.

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Spare lamp Pedpfx Aqsw E I Itovepw Calibration panel (aluminium) CP20/MV 350x280mm²

Condition: good (used), Year of construction: 2022, functionality: fully functional, 3D Scanner Solutionix D500 Psdpfx Aqexvyiujvspw Year of manufacture: 2022 Feature Specification Camera technology: 2 × 2.0 MP cameras Light source: Blue LED Measurement accuracy: Up to 0.01 mm Point-to-point distance: 0.056 mm Scan area (FOV): 92 × 70 × 60 mm Measuring range: Up to approx. 120 mm Volume capture area: Up to 385 mm³ Turntable: Integrated, fully automatic Calibration: Fully automatic Texture capture: High resolution, no additional color cameras required Interface: USB 3.0 Type B Software: ezScan 2017, compatible with Geomagic DesignX & ControlX Typical applications: Jewelry, precision mechanics, reverse engineering, cultural assets, 3D printing Assembly Table MT-400 Year of manufacture: 2015 Feature Specification Load capacity: Up to 400 kg Max. table size: 1200 × 1900 mm Height adjustment: Electric, stepless, 750–1150 mm (partially up to 400 mm stroke) Tilt adjustment: Electric, 0–90° Support frame: With variable extension up to 300 mm Plate fixation: Via vertical clamp or quick-release clamp Mobility: 4 swivel castors with total lock Installation aid: Roller strip for sliding the plate into the control cabinet Material: Powder-coated steel base frame, MiniTec standard profiles

Condition: like new (used), functionality: fully functional, machine/vehicle number: BC120058, Year of construction: 2022, operating hours: 260 h, As-new 3D scanner, model VL500 from Keyence, available at a competitive price. The device is in perfect working condition and will be offered for sale at the end of March 2026. The ideal cost-effective solution for surface scanning of technical components. Resolution: 0.001 mm; repeatability: 0.002 mm; measurement accuracy: ±0.01 mm. Original purchase price was over €80,000. Ppedsx Dy Iaepfx Aqvow

Year of construction: 2008, operating hours: 0 h, condition: new, machine/vehicle number: DW-A-414, Dental Wings Dental Wing 3D Scanner DW-5-140 Year of manufacture 2008. Serial no: DW-A-414 Accessories in a case please check the pictures, also the connection USB cables with the computer. no USB key software is available, only the installation CD. Lamp lighting is confirmed Required PC connection • Detailed operation is uninspected because details are unknown Power 100 W, Input 100—240V, 50-60 Hz Condition: Power ON ok, but not tested. The scanner is new and has never used. Ppodpfxjhalgde Aqvjw price Euro 1.300 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement Pjdot Irffjpfx Aqvjpw

Condition: used, 3D Systems SLS PRO 230 Sinterstation Pro Fully operational and complete with extensive accessories Pjdpfxjyghifj Aqvjpw

Condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. Trumpf TruPrint 3000 G02, featuring Zirox sensor, single laser, and powder bed monitoring options. Trumpf TruPrint 3000, including filtration system Serial number: S0721Q0022 Laser runtime: 17,508 hours (laser beam on) Most recently used with AlSi10Mg aluminum alloy The 3D printer has already been dismantled by the manufacturer. Dismantling and functional test reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. Accessories: 4x dosing containers 1x build cylinder 1x overflow container Various spare parts (e.g., protective glass) Manuals An Armanni CAR.Elev. pallet truck for container exchange is also in stock and available as an optional add-on. Pjdozpvumspfx Aqvepw Faster production of high-quality 3D components D1. Machine concept The TruPrint 3000 is a versatile medium-format machine featuring external part and powder management for the industrial production of complex metal components via 3D printing. Thanks to its large build volume, it offers great flexibility regarding the size, quantity, and geometry of parts for specific applications. Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate cm³/h 5 – 60 Layer thickness μm 20 – 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 – 500 O₂ concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring – Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas – Nitrogen, argon Power supply V / A / Hz 400 – 32 – 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The specifications in our quotation and order confirmation are authoritative. Technical data TruPrint 3000 Tab. 3

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. Pedpozpvdzjfx Aqvepw TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Operating hours: 18,700 (as of 18.04.2023) Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) - Maximum build volume: approx. 650 × 750 × 550 mm Pedszii Umepfx Aqvjpw - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-State Nd:YVO4 with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ coating system: Process: Replaceable coater Adjustment: Self-leveling and self-correcting Layer thickness: Minimum 0.05mm, maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominally 0.13mm in standard mode Large line detection: Nominally 0.76mm Maximum drawing speed Edge detection: 3.5 m/s Large line detection: 25 m/s Build volume: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Podpfx Aqozd Tt Aevepw Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Size (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here we offer you a 3D SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer features a large build volume. Ppodpfx Ajzdyxreqvsw This allows even large models to be produced without prior division. Furthermore, the large base area increases productivity when printing many small models in a single print job. 3D color printer with enormous productivity and color accuracy. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinters, operate using a layer-by-layer process based on the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and highly detailed prints, these 3D printers do not require dedicated support structures. The unsolidified powder supports the parts during printing and is then semi-automatically recycled. Application areas: Communication of form and design, installation analyses, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for deep drawing, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of 3D full-color printing systems. Technical data: ZPrinter ProJet 660 Pro 3D printer Build format: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Fully automatic (automated setup and self-monitoring, automated powder loading, automated recycling and powder removal, locking binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089-0.102 mm Number of jets: 1520 Details: ZPrinter ProJet 660 Pro 3D printer File formats for printing: STL, VRML, PLY, 3DS, ZPR Device dimensions: 188 x 74 x 145 cm Device weight: 340 kg Power requirements: 100-240 V, 1.5-7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional and Windows Vista® Business/Ultimate Legal regulations: CE, CSA Special setup requirements: None Type: ProJet 660 Pro 3D printer Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m Ppjdpju Smq Sefx Aqvsw - Rema Scanner - log infeed conveyor

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, type of input current: AC, input voltage: 240 V, input current: 12 A, input frequency: 60 Hz, 6x HD2500 plus Psdpfx Aqjyb R E Sevopw Very good condition

Condition: excellent (used), We offer a professional optical 3D measurement system, KEYENCE VL series, designed for fast and precise scanning of technical components. This set is ideal for quality control, reverse engineering, and non-contact measurements in industrial environments. Set includes: – Scanning head VL-370 Condition: Very good, well-maintained equipment Pedpfx Aeyc H Npeqvspw Note: Set is sold without monitor / PC unit (option to equip according to your needs) Manufactured: Made in Japan