Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
faceplate diameter:2500 mm Tp8fkg8t turning diameter over slide rest: mm turning length: mm travel - cross:400 mm travel on the bed:2000 mm upper slide:300 feed speeds:0,1 - 18 mm/min max. workpiece weight -without tailstock:4000 kg faceplate turning speed range:1,12 - 56 U/min total power requirement:23 kW weight of the machine ca.:22,5 t dimensions of the machine ca.:6 x 3,5 x 3 m with digital readout for 3 axis with clamping plates 2 x 1400 x 3000 mm with tailstock misc. accessories more
6
faceplate diameter 1000 mm turning diameter over slide rest 1400 mm G2k3c822o turning length 800 mm turning speeds 8-450 U/min control Siemens 802 D voltage 400 V frequency 50 Hz total power requirement 75 kW weight of the machine ca. 15 t dimensions of the machine ca. 6x3x2 m modernized in November 2007: Control: Siemens 802 D electrics operator panel hydraulics more
5
Lathe, lathe, lathe plan on Foundation boards Turning length 5,000 mm headstock height Center of tip 1100 mm -maximum work size flying power 5,000 kg -maximum work size between the top 12,500 kg 82x78vs Table 2000 mm speed range from 1.8 to 90 RPM Feed range from 0.5 to 45 mm / min -Quad steel holder -Haupantriebmotor 30 kW Weight 34,000 kg more
5
turning length 150 - 650 mm swing diameter 1450 mm faceplate diameter 1000 mm centre height 500 mm turning speeds 4,2 - 190 U/min spindle bore 82,0 mm Mpyux total power requirement 11,0 kW range L-W-H 3,9 x 1,2 x 1,7 m weight of the machine ca. 6500 kg more
6
Digital display HEIDENHAIN Turning diameter over bed 2060 mm Turning diameter over support 2060 mm Turning length 1500 mm faceplate diameter 1800 mm Top plate 1040 mm above Top width 2000 mm Turning diameter in the pit of 2500 mm Length 600 mm the bend Spindle bore 80 mm Workpiece weight max. 3000 kg Tailstock spindle mount Mt 6 Faceplate speed range (24) 0.85-180 RPM Feeds-bed sled / LW 2-108 mm / min Feeds - longitudinal and transverse 1.51-83 mm / min 21 main motor kW Total po... more
4
faceplate diameter: 2500 mm 9ctjj7hov turning diameter over slide rest: - mm turning length: varriabel mm centre height: 1250 mm spindle bore of work spindle: 100 mm range of revolution per miute: 1,4 ... 140 U/min faceplate rpm:: 18 feed range: 0,18 ... 63 / 18 step mm/min rapid traverse longitudinal and cross: 5000 m/min control voltage: 220 V / 50 Hz total power requirement: ca. 55 kW weight of the machine ca.: 29 t dimensions L x W x H: auf Anfrage m Application possibilities: - of disk-s... more
4
 Start Chat

Plandrrehmaschine Fritz Werner KD 300

Pfungstadt Germany
6566 km
1964
USED
Article number: MA1039 Manufacturer: Fritz Werner Type: KD 300 Year of construction: 1964 Machine number: KD 300/131 Length [mm]: 800 Width [mm]: 1100 Height [mm]: 1350 M7wz7 Weight [kg]: 1100 Power supply: 380V Centre distance: 200 Tip height: 240 Spindle bore: 30 Feed automatically: 0,091 0.109 Gear [RPM]: 45 2000 3 jaw Chuck: Yes 4 jaw Chuck: Yes Multi fix holder: Yes Coolant system: Yes more
6
Ravensburg RS 33E hydraulic Facing Lathe Faceplate 1300 mm Max diameter 1500 mm change holder D Electric motor 55 kW Width 2.5 m G8swy9 Length 4.2 m Weight approx. 10 Ton more
3
Hsmu2k7swing diameter 840 mm distance between center 1500 mm 2x 3-jaw chuck D 400 mm, D 600 mm more
6
PLAN LATHE WEIKA FL 2200 - 04-07-001 Shipping time: immediately Number: 04-07-001 Manufacturer: Weika Type: FL 2200 MACHINE DATA Year of constr.: Mint L x W x H: CA. 3400 x 2300 x 2300 mm Weight: approx. 8000 kg Like new condition TECHNICAL DATA Digital display: 2 - axes - digital display new Dimensions: Maximum turning diameter over bed: approx. Ø 2200 mm Maximum turning length: 700 mm Spindle: Speed range: approx. 9-75 U/min Maximum workpiece weight: 3000 kg P... more


Facing lat...
every day

New machines via email!

Be informed!
6
WMW ZERBST Ø 1800 x 7000 Lathe - Make : WMW Zerbst - Typ : DPS 1800 / 1 - Age : 1976 - Mach.No. : 35 - 0462 - Swing over bed : 1.800 - Swing over cross : - Centre height : 900 - DBC : 7.000 - 4 chuck Ø : 1.800 - Movement support : 8.000 - Movement tool post : 800 - Movement top slide : 600 - Max. work load : 12.500 - Turning speeds 18 : 112 Rpm - Feed rate : - Rapid feed : - 3 bed way construction - Motorised tailstock - Threat cutting over worm - Dimension Xz0vs27ji - Length : - Wid... more
6
faceplate diameter: 1000 mm turning diameter over support: 760 mm turning length: variabel mm center height: 1250 über Boden mm spindle bore: 80 mm spindle revolutions per minute : 4,5 - 224 / 18 step U/min total power requirement: 55 kW weight of the machine ca.: 21,0 t Facing Lathe machine is equipped with grinding support and rotary support. Control analogue with grinding device technical specifications: - turning Ø over foundation 2480mm turining support: - axis travel - longitudinal suppo... more
3
Technical data Zerbst DP1/S3 x 1500 CNC CNC control Sinumerik 820T Factory No. W07 111 712 Built in 1996 Workspace Tip height over bed: 800 mm 27zx78sxr Maximum turning diameter over bed: 1580 mm Largest Drehdurchm. over bed slide: 1000 mm Centre distance: 1500 mm Cross slide travel: 800 mm External voltage: min 125/max 780 mm Internal tension: min 360/max 1000 mm Speeds and feeds Power: 55 kW Speed range: 1-458 U/min Feed x / Z axes: 1-1000mm / min Rapid traverse x / Z axis: ... more
5
Year of construction: 1993 and she modernized 09/2014 Control / control: Siemens 840 d sl Description / Description: Bed slide shift (Z axle): 1800 mm Plan slide shift (X-axis): 1520 mm Rapid traverse speed: 1-5000 mm / min Feed force Z axis / x 50 kN / 60 kN Turning diameter over bed rail: 2400 mm Swing over bed rail: 2500 mm Turning diameter over bed slide: 2000 mm Tip height of bed rail: 1375 mm allowable workpiece weight (s = 530 mm): 6500 kg Machine weight: 39000 kg Faceplate... more
5
Plan lathe VDF Boehringer PL1000 Bj.ca. 65 Ueberbett turning diameter: 1200 mm Cludgcy3q Ueberplanschlieten turning diameter: 800 mm Turning length: 1250 mm Faceplate: 1000 mm Spindle speeds: 1.5 150U/min Spindle motor: 15Kw. more
6
Head lathe head lathe plan lathe Manufacturer Colombo Type TF 1400 Cass2bjg maximum turning diameter 1400 mm maximum turning length 1000 mm Faceplate diameter 1200 mm 4-axis digital display Machine is in property gebrauchetn good condition Free loaded on truck more
6
EST Ticino ET BM 420 /1500 Lathe sliding bed universal lathe - Make : EST TICINO - Typ : ET BM 420 - Age : 1988 - Mach.No : 1045 - Swing over bed : 840 - Swing over support : 710 - Swing in the gap : 1.580 - Centre distance : 1.500 - Gap length : 900 - Centre distance bed open : 2.900 - Spindle bore : 130 - Bed width with double prism : 600 Eamj2wfvg - Length of the main-slide guides : 900 - Cross slide width : 770 - Diameter tailstock spindle : 130 - Travel Manuel quill : 300 - Morse ta... more
6
faceplate diameter: 2000 mm turning diameter over support: 2000 mm turning length: 2340 mm center height: 1250 mm spindle bore: 98 mm max. workpiece weight between centres: 16000 kg workpiece weight: 3,8t bei 50mm Abstand t workpiece weight: 2,0t bei 600mm distance t total power requirement: 65 kW weight of the machine ca.: 36 t space requirement approx.:: variable m The machine will be modernized. (electric, electric cabinet, main drive with frequency converter stepless adjustable and 4 axis di... more
6
4-jaw face plate diameter 1600mm 3 way bed headstock and bed are separate bed consist of 3 pieces 2 supports 7iucy8lju 2 steady rests diameter 100-600mm Digital read out at support 1 and support 2 tail stock Technische Daten / technical details: Drehdurchmesser ueber Fundament/ rotary diameter over foundation 2500 mm Drehdurchmesser ueber Bett / rotary diameter over bed 2000 mm Drehlaenge / turning length 10000 mm Werkstueckgewicht zwischen Spitzen / workpiece weight between centers 16000 kg ... more
6
maximum circulation - Ø: 3300 mm maximum turning length: 11000 mm maximum circulation - Ø over carriage: 2600 mm Number of bed sleigh 2 Ø - face plate: 3000 mm Workpiece load betw. Top 45-50 to. Workpiece load with rests approximately 60-70 to. Zazt90tb Specialities: Adapted grinding unit, aspirator and 2 x bezel. Weight approx.: 120 to. more
6
Swing over bed 1250mm 3vxylfdj2 Swing in gap 1650mm Swing over slide 750mm Spindle speeds 2,2-400 rpm Misc.accessories MARCELS MASCHINEN CH more
6
Paddling yews Ø: 2500 mm Trick Ø in the pit: 2800 mm The biggest circulation above the shifting-record: 2200 mm Movement of the bed sledge on the across bed: approx. 700 mm Movement of the Bohrsupportes on the bed sledge: approx. 450 mm Movement of the boring bar: approx. 1100 mm Uzviqcpt Inside cone of the main spindle: MK 6 Speeds: 1.5 - 68 revos Surface need: In 4500 x in 2500 x 2500 mm Plan lathe with separate bed and Bohrsupport more
6
EST Ticino ET BM 420 /1500 Lathe sliding bed universal lathe - Make : EST TICINO - Typ : ET BM 420 - Age : 1982 - Mach.No : 1045 - Swing over bed : 840 - Swing over support : 710 - Swing in the gap : 1.580 - Centre distance : 1.500 - Gap length : 900 - Centre distance bed open : 2.400 - Spindle bore : 160 - Bed width with double prism : 600 - Length of the main-slide guides : 900 - Cross slide width : 770 - Diameter tailstock spindle : 130 - Travel Manuel quill : 300 - Morse taper : Mk-6 ... more
6
Manufacturer: WMW ZERBST Type: DP 1250 Year of construction: 1974 / gebr. Machine number: 33-0434 Largest Rotary-Ø v. d. bed: 1,250 mm Face plates ø: 1,250 mm Speed range: 4-180 RPM Feed range: 0.063-1.4 mm / Rev Rapid traverse speed: 2,2 m / min Weight (Panel): approx. 200 kg Dimensions Lxwxh: approx. 2,700 x 1,950 x 1,800 mm 8bc3hlv3i Power of main engine drive: 18.5 kW Weight (machine): 5.960 kg Additional information: • fixed transverse bed • incl. control cabinet ... more
3
turning length 800 mm turning diameter 2480 mm speed 5,6 - 280 U/min voltage 220/380 V total power requirement kW weight of the machine ca. t Baczbi0v dimensions of the machine ca. m more
3
1x used chisel / Heavy Duty Lathe Manufacturer: Busch Type: A1300 Year: 1980 Weight: 280kg Length: 1300mm 8x different adjustment Qmkkyxoky more
5
faceplate diameter:1400 mm turning diameter over slide rest:1000 mm turning length:1600 mm bed length:2550 mm turning diameter in the pit:2000 mm number of spindle speeds:7 - 350 U / min bed width:550 mm Llv0l total power requirement: kW weight of the machine ca.:8 t dimensions of the machine ca.: m more
6
turning diameter 3000 mm 920ixiewo turning length 1800 mm faceplate 2500 mm Control SIEMENS 802 The machine was completely overhauled in 2008 and can visit the camp. The control cabinet and the entire CNC Siemens 840D + All engines were re-installed in 2008. The total cost of the overhaulment amounted to € 220,000. more
1
turning diameter over bed 1090 mm turning diameter over slide rest 690 mm turning length 5000 mm spindle bore 146 mm spindle taper DIN 55027/15 turning diameter in the gap 1250 mm bed width 700 mm quick change tool holder Größe "D1" spindle turning speed range 2 - 1000, 2-Stufen U/min feeds - longitudinal 1-3000 mm/min feeds - cross 1-3000 mm/min rapid travel - longitudinal/face 10 000 mm/min thread - mm pitch 0,5 - 480 mm thread - inch 60 - 1/16 Gang / inch. 92humhld7 thread - module 0,125... more
3
faceplate diameter 0 mm turning diameter over slide rest 900 mm turning length 1.000 mm total power requirement 25 kW weight of the machine ca. 8 t dimensions of the machine ca. m Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm Rclwfd37r 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accesso... more
3
turning diameter 1250 mm turning dia. in gap 1800 mm speed 5,6 - 250 (12x) U/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. m 8dnm3sow more
4
Gurutzpe Super AT 650-2000 / plan deer machine, built in 1986 / completely overhauled, digital display, peak width 2000 mm, machine was overhauled completely--evidence basket diameter over slide 1 1300 mm, 350 mm, head ø bed available, pressure roll diameter 000 mm, 3 JAWS / 1600 mm,. Bao3aj3rmm more
5
turning diameter over bed:1600 mm turning diameter over slide rest:1250 mm turning length:6000 mm weight of the machine ca.:60 t max. workpiece weight between centres:40000 kg number of spindle speeds:0,45 ? 224 U/min total power requirement:100 kW dimensions of the machine ca.: m milling unit:Ja grinding head:Ja mm 8epclxc2j closed steadies: number:2 open steadies: number: more
4
TR 70C lathe. Manufacturer FUM Poręba. Construction year 1973. Basic technical data: C2g8i2es Turning diameter over the bed - 700 mm, Turning diameter over the slide - 430 mm, The turning diameter in the selected bridge - 1150 mm, Turning length in the selected bridge - 350 mm, Spindle flight - 80 mm, Spindle rotation - 10 - 1000 rpm, Main engine power - 14/10 kW, Range of longitudinal feeds - 0.13 - 4.7 mm / rev Turning length - 500 mm Equipment: Planszajba. more
1
turning diameter over bed 1090 mm turning diameter over slide rest 690 mm turning length 5000 mm 8hg0bmnfw spindle bore 146 mm spindle taper DIN 55027/15 turning diameter in the gap 1250 mm bed width 700 mm quick change tool holder Größe "D1" spindle turning speed range 3,5 - 1000, stufenlos U/min feeds - longitudinal 1-3000 mm/min feeds - cross 1-3000 mm/min rapid travel - longitudinal/face 6000 mm/min thread - mm pitch 0,5 - 480 mm thread - inch 60 - 1/16 Gang / inch. thread - module 0,125... more
6
faceplate diameter 3550 mm total power requirement 55 kW weight of the machine ca. 29 t centre height 1250 mm turning diameter max. 4500 mm turning speeds 0,9 - 90 U/min feed 0,06 - 8 mm/min bed height over floor 560 mm bed slide 1300 mm cross slide - travel 750 mm travel of compound slide-rest 620 mm Daukrhmoe max. torque on the faceplate max. 50 kNm flute distance 250 mm Rapide traverse 5000 mm/min digital readout Heidenhain POSITIP 855 Plate field 1 Supports 2 more
6
faceplate diameter 2500 mm turning diameter over slide rest mm turning length 2500 mm swing diameter 4000 mm 9u8gn9w3a turning diameter over bed 2840 mm centre height 1420 mm turning speeds 0,75-38 U/min Spindle diameter 300 mm spindle bore 120 mm tailstock quill diameter 180 mm length of gap 600 mm total power requirement 38 kW weight of the machine ca. t dimensions of the machine ca. m more
5
turning length 1800 mm Control SIEMENS 802 Mxbyx - General refurbished in 2007 including new transmission Machine in TOP CONDITION more
6
Facing lathes Make: Weipert Type: WEE Baiyzogljl Swing over bed: 900 mmø Swing over support: 700 mmø Spindle boring: 80 mm 4-jaw: 1.000 mmø Distance between Centers: 2.000 mmø Centerheight: 490 mm ø Swing in the gap: 1.300 mm ø Stock Number: draai533 more
6
1 used plan head lathe Make: RAVENSBURG with Verschiebebett Main dimensions: Ucu3frpaj Top height above the bed Prism: 500 mm Faceplate diameter: 1000 mm Drehduchmesser on the bed Prism: 1050 mm Turning diameter over the bed slide: 750 mm Greatest distance of support before the face plate: 500-1500 mm The bend before the face plate width: 150-1150 mm Turning diameter in the bend: 1380 mm Swing diameter in the bend: 1450 mm Shift of support on the bed slide: 500 800 mm Shift of su... more
5
turning length:5000 mm bed length:6300 mm faceplate diameter:1250 mm swing over bed:2000 mm swing diameter over bed slide:1600 mm cross slide - travel:750 mm spindle bore:100 mm spindle diameter in front bearing:240 mm Llvzx steady diameter:760 mm travel of compound slide-rest:620 mm max. torque on the faceplate:20.000 Nm L/B/H:11 x 2,3 x 2 m rapid traverse longitudinal:5000 mm/min reus:3,55 - 450 U/min feed::0,006 -12,5 mm/U total power requirement:ca. 50 kW weight:26 t with digital readout, ... more
6
Technical DatenZerbst DP1/S3 x 1500 CNCCNC SteuerungSinumerik 820TFabrik No. W07 111 712Baujahr 1996ArbeitsbereichSpitzenhoehe bed: 800 mmGroesster turning diameter over bed: 1580 mmGroesster Drehdurchm. over bed slide: 1000 mmSpitzenweite: 1500 mmQuerschlittenweg: 800 mmAussenspannung: min 125/max 780mmInnenspannung: min 360/max 1000mmDrehzahlen and VorschuebeAntriebsleistung: 55 kWDrehzahlbereich: 1-458 U/minVorschub x / Z axes: 1-1000 mm / minEilgang X - / Z-axis: 6000 mm / minCNC SteuerungSi... more
6
faceplate diameter 1500 mm turning diameter over slide rest 1260 mm turning length 2000 mm turning length (3500) mm turning dia. in gap 2180 mm turning diameter over bed 1540 mm turning speeds 2,1-96 U/min spindle passage 80 mm total power requirement 18,3 kW weight of the machine ca. t Mabvx dimensions of the machine ca. m more
3
Plan turning VEB DP 3000 Turning diameter: 3000 Year of construction: 1960 Power: 23 kW Min / max speed: 0.71 U/Min. -56 RPM. Faceplate diameter or maximum clamping diameter: D2000, large circulation D 2200 mm Baiyb3zo03 maximum workpiece weight and that the maximum permissible distance of centre of gravity towards the table: Clamping flying workpiece weight: 4000 kg at distance of centre of gravity of the faceplate: 300 mm Workpiece weight between centers: 12000 kg Weight... more
6
Facing lathes Make: Geminis Type: GE-1200-S Swing over bed: 1.300 mm ø Spindle boring: 520 mm ø 4-jaw: 1.200 mm ø Speed: 3,5 - 280 rpm Engine Power: 30 kW Including: conical ruler on the bed and digital read-out Clqfsln Stock Number: draai712 more
6
1 used head plan lathe Make: Hercules Faceplate diameter: 3500 mm Main engine power: 45 kW 730 R.p.m. - 380 V Spindelumdr.: 0.63 - 0.9-1,25 1.8 2.5 3.55 - 5.0 7.1 Bar support with 2 steel holders right-left, length 5000 mm No pictures available, are still made. Uokcinnqq Price free shipped from stock 56291 Wiebel home: VB 30.000,00 + VAT more
3
Heavy lathe Make: Waldrich Siegen Type: WDS 1500 x 9000 LL Max swing: 3300 mm maximum turning length: 11000 mm maximum swing over carriage: 2600 mm Number of bed sleigh 2 Diameter face plate: 3000 mm Workpiece load betw. Top 45-50 to Workpiece load with rests approximately 60-70 t0 7rxyshtil Weight approx. 120 to more
6
Head lathe ZERBST Jtub9y DP 2000 2 plates. more
6
3-jaw-chuck diameter 630 mm turning diameter over slide rest 650 mm turning length 500 mm turning dia. in gap 1420 mm digital readout Mitutoyo turning speeds 3,55-710 U/min total power requirement 24 kW weight of the machine ca. 9 t Bakytzqgdq dimensions of the machine ca. m more
6
L. + Z. head lathe Fabr. BROWN & ZERBST Built in approx. 1955 Technical data: Tip height 1150 mm Bafzxhdvkl Top height above sled 850 mm Turning diameter over bed 2300 mm Turning diameter over slide 1700 mm Face plates diameter 1750 mm Spindle bore 90 mm 16 spindle speeds 0.55-55 RPM Longitudinal feeds 12 0.22 3.5 mm / Rev 12 cross feeds 0.13 2.1 mm / Rev Bed width 1600 mm 20 kW Weight (estimated) 13t Dimensions L x W x H 4500 x 2400 x 2600 mm with: -Feed in the upper support... more


Facing lat...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close