saw blade diameter 520 mm
cutting diameter 180 mm
stroke 420 mm
cutting length 420 mm
capacity 90 degrees: flat 500 x 115 mm
cutting range rectangle 400x165300x125240x106 mm
Fw0chjv
Capacy 45°: rectangle 430x110 350x165 290x175 m/min.
saw band feed 10 - 80 m/min
total power requirement 2,8 kW
weight of the machine ca. 1,25 t
dimensions of the machine ca. 1,52 x 1,52 x 1,56 m
Condition: good, machine ready for operation
Electric 380 Volt
Control panel Siemens
Minimum quantity cooling dev...
TRENNJAEGER - PMC 8- disc saw, diameter 660 mm - max diameter 220 mm - max workpiece dimensions 660x220 mm - max workpiece dimensions 450x220 mm (at 45 degree angle) - weight 2700 kg - used condition
Bjopq2fh8i
Cold circular saw
- Wagner Trennjaeger LTS 520
Bmexkmcxgt
- Saw blade diameter 520 mm
- Stroke 420 mm
- Max cutting length 420 mm
- Dimensions of the machine approx. 1550 x 1550 x 1550 mm
Machine suitable for cutting profile, plate, square and round material
in straight pieces and in miter.
TECHNICAL DATA
Single head cutting off machine with automatic feed,
pneumatic tilting of the head.
Equipped with TCT Saw Blade 550 mm, tilting
of the unit from 22,30° to 90°, to 45°.
Threephase motor 3HP. Working pressure 7 bar.
TCT Saw Biade D 550 mm
Ys0efw
Horizontal pneumatic clamping set
Air filter
Full protection of the blade
Air gun
Vertical pneumatic clamp
Overall dimensions: 100x150x180 cm.
Weight: 420 kg.
3 meters measuring system and roller coneyor
Similar machine to elumatec 245
Cold circular saw Kaltenbach HDM 950
Top performance for heavy steel construction
year of construction 1989
Cxgz2ylu
Diagonal 45 ° mm 100 degree angle
Max. cutter diameter 1000 mm
Hydrolik clamps
Separating hunters - cold saw "PMC 12-N" section: approx. 1.100 mm, blade diameter: 800 mm.
8vb0wytih
The gray box displayed on the photo on a boom was the control to a foot, this is no longer available
A used well-preserved long cutting cold saws cut-off Hunter
Saw blade diameter 660 mm
3ixsxicz
Bevel cuts up to 30 ° possible
Section see PDF document.
NC fence exactly STOP 220 measuring length 6000 mm with heavier roller.
Used quick-cut saw TRENNJAEGER UNITRENN 520 HA with only a few hours of operation. Cutting area: Max. 110 x 110 x 9 mm / 200 x 90 mm single cuts (cutting time 3 - 5/6 - 8 seconds) Max. 70 x 70 mm x 6 mm / 100 x 50 mm series cuts (cutting time 3 - 5/6 - 8 seconds) Proma - saw blades, full steel blade with a diameter of 520 mm and 560 mm with 300 teeth. Cutting speed 3,600 rpm. Height adjustment with cover and protective screen. Manual miter setting with scale. Also available as an option: 1 x Exa...
1 used hydraulic cold saw machine
Make: KALTENBACH
7wo7pta2r
Model: RKT 630
Year of construction: approx. 1979
maximum blade diameter 630 mm
Cutting capacity round 220 mm
flat 550 x 130 mm
Cutting speed about 12 + 24 m / min
Speeds 2 PCs.
Engine power 3 / 5 kW
Dimensions L x W x H 1400 x 1500 x 1900 mm
Weight 1500 kg
• Semi-automatic cold saws:
• The electro-hydraulic control has the following functions: stretch, cut and release
• Vertical vise
• Continuous feed
• 2 speeds
• Very sturdy stee...
Nr. 3320
Kaltkreissaege
KALTENBACH
HDM 750 HA
Ø 250 / 500 x 300 mm
2oucrm
Saegeblatt 800 mm
2 x Rollenbahn
Gehrungseinrichtung
Near MANNHEIM
price negotiable
Single head angle saw, mitre saw, aluminium cutter
E9f7xhl3m
MECAL SW 550
Infinitely variable speed and depth.
Disc diameter 550 mm
He leaned the saw unit in both directions.
Wet cutting.
Machine in very good condition.
Saw blade Ø: 1310 mm
round 440 mm square 400 mm
P2guaz8u8
flat 800 x 290 mm 60° 590/750 x 300 mm 45° 460/600 x 300 mm 30° 420 x 270 mm 20° 260 x 260 mm
Dimensions 2870+380 x 1320 x 2700 mm (LxBxH)
weight circa 7500 kg
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.