Used Cold saws - fully automated - saw blade diameter 0-350mm for sale (53)

Condition: used, Year of construction: 2003, Saw blade diameter 300x32x2.5 mm Cutting range at 90 degrees: round 10-90 mm Cutting range at 90 degrees: flat 80x10-80 mm Cgjlotyma Nsink A Eot Cutting range at 90 degrees: round - solid material 10-40 mm Cutting range at 90 degrees: square - solid material 10-40 mm Cutting range at 90 degrees: flat - solid material 40x10-40 mm Cutting range at 90 degrees: square 10-80 mm Machine weight approx. 600 kg Space requirement approx. 2590x1910x1910 mm

Condition: refurbished (used), saw blade diameter: 360 mm, cutting range round at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Square material 20 - 80 mm DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Celineh Uqpvek A Eegt Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!

Condition: new, - Fast cutting saw for solid material / profile up to 75mm Cjlinkoggytqo A Eogt - autom. loading magazine for bars up to 6300mm length and 3t weight - feed via ball screw - single stroke with 600mm - SIEMENS - electronics / drive / control - good parts / first cuts are sorted - on request with conveyor unit for sawn parts - robot connection possible - incl. suction

Condition: good (used), . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system Cgolewbtpnjink A Eot - Protective housing, limit switch-protected - 6 sawing speeds . .

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Cutting with: 130 mm Power: 5,1 kW Weigth: 1260 kg Cgelinkjgixvws A Eot

Condition: excellent (used), Manufacturer: KALTENBACH Type: KMR 100 AP Year of manufacture: 2008 Csliouu Aczjnk A Ejgt Roller conveyor for removal and feeding of bars approx. 800 cm, with 3 safety light barriers.

Condition: used, Year of construction: 1990, Functionality: fully functional, saw blade diameter: 250 mm, I am selling a used fully automatic sawing machine, manufacturer Rohbi Cgslinkewdygxo A Ejt

Condition: new, Year of construction: 2025, Schnittbereich rund: 20 - 100 mm Schnittbereich quadratisch (B x H): 20 x 70 mm Kürzeste Länge des abgeschnittenen Stücks : 5 mm Kürzeste Reststücklänge im automatischen Betrieb*: 65 mm Kürzeste Reststücklänge im Einzelschnitt: 30 mm Length: 2300 mm Breite inkl. Späneförderer : 2260 mm Height: 22100 mm Höhe der Materialauflage: 925 mm Weight of machine approx.: 3950 kg Electrical connected load: 26 kW Leistung des Sägemotors: 18,5 kW Leistung hydraulischer Motor: 2,2 kW Schnittgeschwindigkeit stufenlos regelbar: 30-160 rpm Cgslowaa Dvoink A Eot Vorschubgeschwindigkeit der Säge: 0,3-30 mm / sec Automatische Materialvorschublänge, Einzelhub: 800 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Sägeblattdurchmesser: 360 mm Sägeblattbohrung: 40 mm Sägeblattdicke: 2,25 mm

Condition: new, MEP TIGER 372 CNC LR 4.0 Item number TI372CNCLR motor power 4,0 kW belt opening 190 mm belt dimensions 370x32x3 weight 1.060 Kg Speed 15-150 1/min. Cutting surface 0° 120 / 110 / 180x100 Cutting surface 45° right 115 / 100 / 120x100 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Electro-mechanical vertical circular saw with semiautomatic function for the use of HSS saw blades to make precision cuts from 45° right to 60° left with multi-micro processors with two controlled axes that allow to program 80 different cutting programs, each with different cutting length and number of pieces, for the same thickness of material Basic equipment: -Saw head slides on recirculating ball linear double guides. -saw head feed with electromechanical cylinder -Rotary axis with thrust bearing -three-stage gearbox -material feeding (length 1000 mm) via recirculating ball screw with stepper motor and movable feeding vice -Vice opening 190 mm -Saw head stroke directly programmable from the control panel, for adaptation to the cutting material -Pneumatic vertical vice -Saw blade HSS DMO 5 Æ 370x32x3 for solid and profiled material -chipping brush -The machine is designed for lift truck transport incl. tools and operating instructions Electrical equipment: -control panel -80 different cutting programs programmable -control light for operational readiness -Main safety switch -console for programming and control, LCD display with auto-diagnostics -LED check indicator on the control panel to check the machine functions -Emergency stop button -Speed changeover switch -Thermomagnetic protection Cgslinschkyrjk A Eet -Undervoltage release -Switch handle protection class IP 55 -Low voltage system 24 volts -Electric coolant device for lubrication and cooling of the saw blade (attachment of a micro-spraying device possible) -Motor 4,0 kW - 400 Volt MEP TIGER 372 CNC LR 4.0 RC with automatic miter cutting Item number TI372CNC LR 4.0 RC motor power 4,0 kW bench opening 190 mm belt dimensions 370x32x3 weight 1.060 Kg Speed 15-150 1/min. Cutting surface 0° 120 / 110 / 180x100 Cutting surface 45° right 115 / 100 / 120x100 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description -Automatic electromechanical vertical circular saw for the use of HSS saw blades to perform serial cuts with automatic miter adjustment between -45° to +45° on steel. -Semi-automatic cycle to perform miter cuts between -45° and +60°. -with multi-micro processors with two controlled axes that allow to program 80 different cutting programs, each with different cutting length and number of pieces, on the same material thickness. Basic equipment: -Saw head slides on recirculating ball linear double guides. -saw head feed with electromechanical cylinder -Rotary axis with thrust bearing -three-stage gearbox -material feed (length 1000 mm) via recirculating ball screw with stepping motor -movable feeding vice -vice opening 190 mm -Saw head stroke directly programmable from the control panel, for adaptation to the cutting material -Pneumatic vertical vice -Saw blade HSS DMO 5 Æ 370x32x3 for solid and profiled material -chipping brush Electrical equipment: -control panel -80 different cutting speeds

Condition: new, Year of construction: 2024, Functionality: fully functional, saw blade diameter: 350 mm, rotational speed (max.): 3,600 rpm, Automatic IMET VELOX 350 AF-NC disc cutter for aluminum with a swiveling arm from 0° to 45 degrees left and right and a tilting head up to 45 degrees. Fast and precise angle lock at 0°, 15°, 30° and 45° right and left with an additional scale for setting non-standard angles. Description: Swiveling arm from 0 to 45 degrees left and right Tilting head up to 45 degrees Fast and precise angle lock at 0, 15, 30 and 45 degrees right and left and an angle scale for setting non-standard angles. Handle for locking the head at any angle Designed for cutting aluminum and light metal solid materials and profiles with high accuracy Control panel with the ability to program all machine operations (including the cutting start point and the cutting end point), showing the blade speed, cut counter, cycle time, motor current and possible errors Feeder with a vice with a max. jaw opening of 200 mm, with a max. stroke of 530 mm, with a min. 2.5 mm stroke Number of cuts (1-9999) and number of feeds (1-29) set from the control panel Manual setting of cutting length with digital readout Two front pneumatic vices with the possibility of transverse movement on the work table, vertical pneumatic vice Metal cutting blade guard Cgslink Aowcd Uke Eet Possibility of connecting a chip extractor Mist lubrication system operating only during cutting Instruction manual in Polish CE certificate, compliance with CEE and EMC standards Electrical elements compliant with the standards: EN60204-1, EN55011 and EN50082 Technical data: Diameter of the blade: 350 mm Opening width of the vices: 200 mm Speed of the blade: 3600 rpm Power of the blade motor: 2.2 kW Working height: 930 mm Final waste: 355 mm Single feed length: 520 mm Coolant tank capacity: 40 l Dimensions: 1800x1450x1950 mm Weight: 607 kg

Condition: good (used), Functionality: fully functional, Technical data : Saw motor, pole-changing 1.0 / 1.6 kW 6 cutting speeds : Motor speed 1/2 8 , 10 , 12.5 m/min and 16 , 20 , 25 m/min Cutting range 90 degrees with blade size 360 mm : round 110 mm flat 200 x 80 mm . Saw blades 315 / 360 mm Hydraulic saw feed Hydraulic material feed, min. 10 mm Hydraulic material clamping 2 additional saw blades Cslink Aev R S Txo Esgt . --> --> Special price : EUR 4.150,-- net , free loaded ! . .

Condition: good (used), Year of construction: 2008, Cutting range round Sawing capacity round 115 mm Max. Saw blade diameter Max. saw blade diameter 350 mm Cutting area rectangular Sawing capacity rectangular 200 x 70 mm Cutting area square Sawing capacity square 105 x 105 mm Sawing unit Sawing unit power 6.5/8 kw Saw shaft speed Speed on sawing shaft 1700/3400 rpm/rpm Maximum feed length Maximum feed length 9999 mm Shortest feed length Shortest feed length 10 mm Weight Weight 2300 kg Ausstattung / equipment: BEHRINGER SPS Steuerung / SPS Control Micro-Sprüheinrichtung / micro lubrication Controlled zero edge Cutting gap extension Maschinenleuchte / machine light Vertikale Hauptspannung / vertical main clamping Cjlink Asrz Rw Rj Eegt Rücklaufsperre / non-return-device Extraction system prepared - (basement extraction unit is not part of the delivery) Roller conveyor infeed approx. 5000 mm -roller conveyor infeed selfmade length 5000 mm

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, saw blade diameter: 200 mm, Fully automatic metal circular saw for burr-free cuts and high sawing performance in thin-walled material Manufacturer: Rohbi Series: RKA-86 Control system: Siemens Year of manufacture: 2007 Origin: Switzerland technical data: ----- - High-speed spindle for saw blade 500 - 3,900 rpm (2.0 kW) - Clamping cylinder pneum. 2.000 N - Cutting range round solid material with HSS saw blade: 2-60 mm - Cutting range profiles solid material with HSS saw blade: 60x40 mm - Cutting range round pipe material with HSS saw blade: 2-70 mm - Cutting range profile material with HSS saw blade: 80x40 mm - Material feed carriage max. stroke: 1,250 mm Drive via gear wheel / gear rack - Clamping vice clamping: hydraulic - Minimum quantity lubrication - Saw blade dimensions: 100 - 200 mm (HSS or solid carbide) - Saw blade monitoring via load pick-up - Chip removal via external extraction possible - Material removal via retracting chute - Weight: 900 kg Accessories: Cslink Astxlxue Ejgt ----- - Operating instructions - 3x sets of clamping jaws with drawings

Condition: like new (used), Year of construction: 2002, operating hours: 5,000 h, Functionality: fully functional, machine/vehicle number: 0213101, saw blade diameter: 350 mm, cutting capacity: 90 mm, input voltage: 380 V, working range: 4,000 mm, A used high class refurbished 2002 BEWO Automatic Circular Sawing including BEWO deburring machine DB-90. Machine Model FCH-90-M serial number 0213101 Including: BUNDLE LOADER: • Max. bundle diameter 650 mm, max lifting capacity 4000 kgs equally divided over 5 lifting units (max starting length 7500 mm). • The bundle loader has 5 new lifting belts. • The bundle loader is equipped with new sensors. CUTTING UNIT: • Heavy duty, high speed roller drive tube transport system, including new transport rollers. • Transport system is provided with new tooth belts. • Automatic setting of saw blade stroke. • Cutting speed sawblade chosen by customer (RPM) + new blade motor drive tooth belt. • 3 KW cutting head motor + frequency converter. • 1 saw blade, spindle 40 mm + clamping flange. • Micro lube blade coolant system c/w spray mist blade cooler. • Hydraulic material clamping system. • Tube discharge system, Max cut length capacity = 4000 mm. • 2 man length stops with new DRO + hydraulic clamping. • Siemens Simatic Panel operator HMI display and Siemens S7-300 PLC. NOTE: Control in METRIC. • 1 set of jaws included with machine. • Electrics built to European standard 400V 50Hz • Feed trough motor + new encoder + frequency converter. New plexiglass windows + new gas springs. • New steel plate for ejection table top including new table nose. • Transport system and material stops are equipped with new sensors. Cgelinkov Sycqe A Est • New tooth belts for encoders. • New chip brush for saw blade. • New hold down finger system. • New hydraulic filters. • FAT at our workshop with material supplied by the end user. • De commissioning • Packing and loading/securing into customers container/truck. Delivery FCA. • No transport and installation but can be quoted additionally and be done by our experienced team.

Condition: new, MEP TIGER 352 NC 5.0 [Fully automatic] Article number TI352NC motor power 3,0 kW belt opening 190 mm belt dimensions 350x32x2,5 weight 680 kg Speed 15 - 90 m/min. Cutting surface 0° 115 / 95 / 180x95 Cutting surface 45° right 110 / 95 / 125x95 Cutting surface 45° left Cutting surface 60° right Cutting area 60° left Description Electro-pneumatic, vertical, linearly guided automatic saw for the use of HSS saw blades to make serial cuts from 60° left to 45° right on steel. The machine also works in semi-automatic cycle. CNC automatic machine with multiprocessor and two axes controlled by MEP control, latest generation, which allows to program 1000 different cutting programs, each with different cutting length and number of pieces, for the same material thickness. Cgolink Aochhhdo Est FEATURES: -New centralized control panel on articulated arm to allow operators to easily reach the emergency stop switch from any working position. -NEW: Fieldbus communication system (Modbus protocol) with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: + saw band speed + number of cuts programmed and executed + saw band thickness + feed length + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -NEW: Display and recording of the alarm and error messages with the possibility of displaying the incidents that have occurred. -NEW:

Condition: new, Year of construction: 2024, Functionality: fully functional, saw blade diameter: 350 mm, overall weight: 266 kg, IMET VELOX 350 semi-automatic circular saw for aluminum with a swiveling arm from 0° to 45 degrees left and right and a tilting head up to 45 degrees. Fast and precise angle locking at 0°, 15°, 30° and 45° right and left with an additional scale for setting non-standard angles. Cgolinkewcd N Is A Est VELOX 350 SHE is a semi-automatic circular saw for cutting aluminum and light alloys. VELOX 350 SHE can cut from 45° left to 45° right and cuts at an angle of up to 45° to the vertical axis. The miter saw is the ideal tool for high-precision cutting and finishing of profiles and solid aluminum. The machine is equipped with an automatic stop system at 0°, 15°, 15°, 30° and 45° both to the right and left. All machine operating functions are controlled via the control panel. In particular, it allows you to set the head position in terms of reaching the material and starting and ending the cutting operation, allows you to view the machine's operating conditions before and during processing. It also has a self-diagnosis system for detecting errors. Two pneumatic vices located at the front and moving laterally on the work surface allow you to block the material. The blade of the disc is fully protected by a guide. There is also a conveyor for chip extraction and an adjustable rod stop. The VELOX 350 SHE has a nozzle for spray lubrication. Features of the device: The cutting cycle takes place in automatic mode Cutting range from 0 to 45 degrees to the right and left Head tiltable in two planes up to 45 degrees Quick angle lock 0, 15, 30 and 45 degrees to the right and left. Additionally, a built-in scale for setting the remaining angles Control panel with the possibility of programming all machine operations Display of blade speed, cutting counter, cycle time, engine current and possible error codes Two pneumatic vices with the possibility of transverse movement on the work table Built-in encoder enabling precise setting of the starting and ending points of the cutting cycle. Protected by a main switch and a minimum voltage coil, thermal motor overload protection Purpose: aluminum, light metals Optional equipment (additionally payable): pneumatic vertical vice for blocking the material two pairs of cast iron V jaws for bundles of shapes and round bars (max. diameter 90 mm.) with tools for their assembly foot pedal with a 3m cable HSS steel blade with hard metal teeth, diameter 350x3.2x32mm with a 32mm hole chip extraction with a magnetothermal switch and a flexible tube with a power of 0.75KW Technical data: Disc diameter: 350 mm Vise opening width: 200 mm Disc speed: 1800/3600 rpm Disc motor power: 1.5/1.8 kW Working height: 865 mm Dimensions: 1100x920x1700 mm Weight: 266 kg

Condition: ready for operation (used), Year of construction: 1980, Type VMS III - PV Machine No. 8518 Year of construction 1980 Cgjlsv Drcyoink A Eot Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Year of construction: 2014, Condition: good (used), The machine is from year of manufacture 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round - 75 mm Rectangle - 60 mm Saw blade dimension ø 285 x 2,0(T) x 1,7 (t) mm T = waste; t = thickness ; bore 32; 4x11 at 63 mm Blade speed inverter monitored 30- 150 rpm blade motor 7,5 kW Hydraulic system 1,5 kW Coolant system Oil mist lubrication Blade feed system servo motor & ball screw material support 1.200 x 5.200 mm Bar feed system: servo motor and ball screw Automatic index single stroke 6 - 600 mm Multiple stroke up to 3.000 mm Automatic chip conveyor Chain conveyor Machine weight, incl. table 2.800 kg Length tolerance +/- 0,1 mm Cutting accuracy +/- 0,1 mm Cgsleh Awzmjink A Eot Remaining piece standard 75 mm Loading capacity 13 x ø 75 mm bars Max loading width. 1.000 mm Accessories: chip conveyor, air cleaning, loading magazine (still under power in production)

Condition: used, Year of construction: 2004, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 940 mm Cgolinov Rgxpsk A Ejt saw blade turning speeds 15-30-45-90 U/min total power requirement 3,15 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 1,1 x 2,1 m Electro-pneumatic, linear-guided sawing machine - Feed roller conveyor 1500mm - Micro spraying device - good condition

Condition: used, Year of construction: 1999, gebraucht 1999 6173 Deutschland 11900 € 1 10700 € 500 mm 2800 U/Min Rund 180 mm, Quadratprofi Cgsliouhdq Ssnk A Eot Rund 120 mm, Quadratprofi 1100 mm 1450 mm 1350 mm 490 kg hydropneumatic saw feed new HM saw blade pneumatic material clamping device vertical automatically opening protective cover Discharge roller conveyor with stop and measuring system, display E 110, 1/10mm, 4.5 m long, plastic rollers b = 250 x Ø 50mm, pneum. clamping, handwheel drive and locking in the operator area, stop can be folded up user manual in GERMAN COMPLY WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 0612072, saw blade diameter: 350 mm, cutting capacity: 90 mm, controller manufacturer: Siemens, controller model: Simatic Multi Panel, BEWO prism clamping system for simultaneous sawing of multiple tubes TECHNICAL DETAILS Control: Siemens Simatic Multi Panel Cutting capacity Round tubes: 8 - 90 mm Square tubes: 10 x 10 mm - 80 x 80 mm Maximum capacity: 8,000 tubes per hour Cgolinkjv Nagds A Eet Saw motor Power: 5.5 kW Cutting speed: 50 - 300 m/min EQUIPMENT - Integrated deburring machine for seamless processing - BEWO prism clamping system for simultaneous sawing of multiple tubes

Condition: used, Functionality: limited functionality, saw blade diameter: 350 mm, total length: 1,650 mm, total height: 2,050 mm, total width: 900 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, motor voltage: 380 V, MEP Tiger 350 CNC FE 3 Phase 380v, 2 speed motor is running fine! 4 Spindle speeds adjustable. 15, 30, 45 & 90 RPM. Semi & fully automatic cutting. Double clamping option. Pneumatic quick clamping. Pneumatic clamping option from above. Pneumatic sawing feed. Feed rate is adjustable. Adjustable sawing dept. Saw memory function. Mitering cuts possible left & right. Saw blade diameter: 350mm Gearbox has been flushed and filled with new oil. Brand new MEP coolant pump installed. Brand new MEP X-axis guides & bearings. Made in Italy! Overall dimensions: 165x90x205cm We have a PDF manual available for this machine. Cgeliov Hhzqenk A Eot We can pre-set the software language in the following languages: English, Spanish, French, German, Dutch – X-axis (feeder unit) have malfunction, due to this malfunction only semi-automatic cutting is possible at this moment. It is an electrical problem we could not find. Electronic schedule is available in the manual we have and spare parts are also still available at the MEP dealership if needed. Contact us for shipping options! €2,000.00

Condition: new, Year of construction: 2025, saw blade diameter 370 x 3,0 x 40 mm cutting diameter 120 mm stroke -- mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round li. 120 / re. 105 mm capacity 45 degrees: square li. 100 / re. 100 mm capacity 45 degrees: flat li. 130x100 / re . 130x10 mm capacity 60 degrees: round 110 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 90 x 100 mm total power requirement 1,8 / 2,2 kW weight of the machine ca. 392 kg dimensions of the machine ca. 700 x 900 x 1800 mm -The powerful, 2-stage gear was specially designed for cuts in solid material designed -The user has a total of 4 blade speeds for optimal adjustment the material available -The large bearing rotary table with internal table clamping and Precision stops at 0/45/60° ensure quick adjustability miter cuts -The vice with quick clamping (optional is a pneumatic one Cgjliovuz Rnonk A Eet Vise = MA, available) is with screwed vise jaws Mistake. With their ribbing, these ensure optimal hold of the workpiece -Underframe with lockable door, chip drawer and removable Coolant pan with electric coolant pump -Chip removal brush

Year of construction: 1970, Condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm Celinkoh I Dvno A Ejgt weight: 940 kg

Condition: used, Year of construction: 1990, saw blade diameter 250 mm capacity 90 degrees: round 80 mm saw blade turning speeds 2 stufig total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 2,1 x 0,8 x 1,7 m Precision circular saw machine Cjljv Ehdpjink A Eogt - high cutting performance and cutting accuracy - clean, chatter-free cut - unusually long service life of the circular saw blades - easy to operate - feed and discharge length 2000mm each