Used Lathes Bed Plan for sale (11,760)

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. Bledpfx Ajv Nw Npof Hjk The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Blodpfx Afewwaruo Hek Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, Year of construction: 2007, machine/vehicle number: 402235, Spindle bore: 36 mm, maximum spindle speed: 7,000 rpm. C-axis, 1 turret, X/Z-axis, 7-station + synchronized spindle, driven tools, 1 tool turret, X/Z-axis, 6-station, driven tools, control system: INDEX C 200-4 D, back-side machining, workpiece removal, conveyor belt, chip conveyor, bar loader MBL 52/3200. Drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Bsdpfxezqy U Tj Af Holk

Condition: used, Year of construction: 2007, machine/vehicle number: 511979, Turning length: approx. 400 mm, bar passage: 60 mm, Y-axis, counter spindle, 2x 14-station tool turret, cross slide X/Y/Z, B-axis slide control INDEX C 200-4 D, workpiece removal, conveyor belt, chip conveyor, manufacturer: KNOLL, bar loader MBL 65/3700, machine requires repair, gear pump defective, repair costs according to quotation: approx. €6,000.00 net, drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Bjdpfx Aezqy Uysf Helk

Condition: excellent (used), SOMAB TRANSMAB 200 is a CNC turning lathe with slant bed, engineered for precision, high accuracy and reliability. Swing over bed 260 mm, spindle bore 35 mm; travels Z 300 mm, X 125 mm. Turret DUPLOMATIC with 8 positions, 8 fixed tools, 16 mm tool shank, inner cone Ø20 mm. Stepless spindle 200–5000 rpm, spindle motor 4 kW, spindle taper A2-4", tailstock Morse 3 with 80 mm stroke and 52 mm diameter, pressure 1200 N; voltage 3x400 V 50 Hz; machine weight ~2500 kg; dimensions L1900×W1400×H1980 mm. Equipment: collet device and set (F38), lamp, tool cabinet, RS232 interface, foot pedal, set of toolholders. Delivers tight tolerances; typical applications: automotive, aerospace, medical, machine tools and watchmaking. Blsdpfezqbmwox Af Hjk

Condition: used, Year of construction: 1971, swing diameter 0520 mm turning diameter over bed slide 400 mm turning dia. in gap 1000 mm Bodey Nd S Aopfx Af Helk turning length 1250 mm turning speed range - spindle 11,2 - 1120 U/min total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,7 x 1,7 x 1,7 m Machine has a 4 position toolholder with quick change device and DRO.

Condition: used, functionality: fully functional, Safop 430 - 820 Parallel Lathe Mobile Bed Blsdpfx Aezmxfpjf Hjk Variable Turning: HP 430 x 2000 - HP 430 x 3000 Turning on Mandrel: HP 830 x 1000 Steady Rest Display Used Machine Internal Code: Car

Condition: used, Model:- AY 1000 x 1000, Serial No: Nc-A3-045 Blodpfoyn R Hcox Af Hjk 1 metre swing over bed, 1 meter between centres 390mm Swing Over Saddle 180mm Spindle Bore 4 Jaw Chuck 800mm Diameter Quick Change Tool Post Fagor 8055 controls Made In Taiwan

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: Bedpfjzfguiox Af Hjlk 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Bodpfxjy U Nqno Af Holk

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Bsdpfx Afoy Uyf Nj Holk

Condition: used, Year of construction: 2010, Technical details: spindle passage: 92 mm turning length: 1000 mm z-axis: min.: 404 mm z-axis: max. 1130 mm facing movement (x-axis): min./max.:15 / 335 mm control: Sinumerik SL840D max. torque on the spindle: 2500 Nm tool turret: 12 tools axial operating pressure: 6,0 bar rapid traverse: 20 m/min total power requirement: 88 kVA dimension machine xH: ca. 4,45 x m dimensions of the bar loader L-W-H: ca. L: 5,7 x B: 2,65 x H: 2,4 m CNC lathe with bar loader - inclined bed lathe -SL 840D control with NCU software 2.6, system software 1.4, store turn software 6.4, with one orientable C-axis, without driven tools -KNCS 260-72 chuck, SMW Autoblok -Clamping force generator via clamping cylinder VNK-200/86 / SMW Autoblok Bsdpfx Aowf Nraof Holk -Measuring system Fa. Heidenhain -Sauter VDI50 tool disk turret, electric drive Bar loaderMaster 80HF, type 33LL: -Dimension round material min./max.: Ø 20mm / 80mm -Minimum length of the workpiece: 33-38-43 to 1000mm -Maximum length of the workpiece: 33 - 3300mm / 38 - 3800mm / 43 - 4300mm -Feed speed (adjustable) 150mm/sec. - Return speed (adjustable) 950mm/sec. -max. offcut length: Ø 8+65mm = 400mm / Ø 66+80mm = 250mm -min. remnant 120mm Chip conveyor / hinged belt from Richter, type SP 450/63 -Discharge height = 1000mm, discharge side right Accessories: -div. tool holders VDI 50 -sizing adapter SK50-> VDI 50 -Power chuck Hainbuch Toplus Kombi Ax-zug GR100 -div. sleeves, guide jaws for bar loader Ø 20 - 75mm i.D. *

Year of construction: 2013, condition: ready for operation (used), A CNC slant bed lathe Focus is offered. Swing diameter over bed: 600mm, max. turning diameter: 330mm, max. turning length: 669mm, spindle bore: 88mm, spindle speed: 3400rpm, travel X/Z: 260mm/762mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, tool stations: 12, tool holder: VDI40, quill diameter: 85mm, tailstock taper: MK4, controls: Siemens. Weight: approx. 5700kg, machine dimensions: X/Y/Z: approx. 3600mm/1800mm/1800mm. Inspection possible by appointment. Bledpfjzfaafsx Af Hok

Condition: used, Year of construction: 2005, Technical details: spindle passage: 38 mm z-axis: 900 mm turning length: 900 mm swing diameter: 560 mm Bljdpfsy Ttyqjx Af Hjk facing movement (x-axis): 290 mm control: Simens Sinumerik 840D sl spindle turning speed - continuous: 0 - 6000 U/min max. torque on the spindle: 190 Nm tool turret: Typ Sauter operating pressure: 5 - 6 bar rapid traverse: 40 - 50 m/min total power requirement: 37,5 KW weight of the machine ca.: 8,5 t dimension machine xH: 4,8 x 2,4 x 2,3 m

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Bodpex Di Rqjfx Af Hslk Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Bsdsx Tgr Tspfx Af Hjlk Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Bodextbf Eopfx Af Hslk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 670 mm, turning length: 3,000 mm, turning diameter: 800 mm, spindle bore: 95 mm, quill diameter: 180 mm, turning diameter over bed slide: 670 mm, workpiece weight (max.): 4,500 kg, Equipment: documentation/manual, From stock! Bjdpfx Aogpg I Ref Hjlk Sinumerik 840D sL - brand new Technical data CNC lathe with slant bed type TOK -80 CNC x 3 (from stock) or 4m, offered after general overhaul : Producer : FUM POREBA - year of overahul final stage of overahul - swing over bed 800 mm - swing over carriage 670 mm - turning length 3000 mm (from stock) or 4000 mm - spindle bore 95 mm - main motor 55 kW - CNC system Siemens - Sinumerik 840 D sl - brand new - tooling system automatic tool turret 12 positions - max. load capacity b.c. 4500 kg - max. load capacity in the chuck 800 kg - number of speed range 2 - range of revolution 4-800 rpm - tailstock quill Ø 180 mm - quill slide out Ø 150 mm - rapid travel in Z and X axis 5000 mm/min - cross travel 410 mm - longitudinal travel 3000 / lub 4000 mm - overall dimensions of the lathe for 3 m b.c. H - 2900 mm, W - 2705 mm, L - 8135 - mass of the lathe: 24,000 kg / for 3 m turning length

Condition: used, ROTATION DIAMETER 630 MM MAXIMUM TURNING DIAMETER 510 MM MAXIMUM TURNING LENGTH 1578 MM BENCH INCLINATION 45° MAXIMUM X AXIS TRAVEL 1590 MM MAXIMUM Z AXIS TRAVEL 290 MM RAPID 20 M/MIN SPINDLE BORE 105 MM ASA A2-8 CHUCK NOSE TAPER SPINDLE MOTOR POWER 18.5 - 22 KW SPINDLE SPEED 2500 RPM QUILL OF TAILSTOCK DIAMETER 125 MM TAILSTOCK TRAVEL 1590 MM TAPER QUILL CM 5 QUILL TRAVEL 120 MM CNC FANUC Oi-TC CHUCK DIAM. 380 MM ROTATION TURRET WITH 12 PLACES CHIP CONVEYOR YOM 2008 WEIGHT 8500 KG Bedpfx Asrzt Iqof Hjlk

Condition: used, Year of construction: 2008, turning diameter 432 mm turning length 864 mm control HAAS bar diameter 76 mm 3-jaw-chuck diameter 254 mm travel -z axis 864 mm travel -x axis 287 mm spindle speed: 3400 1/min spindle bore 88 mm swing over bed 762 mm swing diameter over bed slide 432 mm turret head 12 Pos. VDI 40 Bledpjupmhwsfx Af Hek drive capacity - spindle motor 22 kW voltage 400 V weight of the machine ca. 7.250 t dimensions of the machine ca. 3,90 x 2,00 x 1,90 m - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS - tool measuring arm - chip conveyor - collant equipment

Year of construction: 1958, condition: used, machine/vehicle number: 58/803 0021, height of centers: ueber Oberbett 300 mm center distance: 1500 mm max. circulation-Ø over bed: ueber Oberbett 640 mm spindle boring: 67 mm Blsdo Uin Uepfx Af Hek spindle retainer: Gr. 8 retainer taper tailstock: 5 MK spindle speed: 18 - 900 rpm forwarding feed: laengs/plan 0,063-2/0,032-1 mm/U thread pitch: 0,5 - 14 mm electrical connection: 380 V, ca. 7,5 kW space needed: 1550 x 3100 x 1250 mm weight: ca. 3500 kg

Condition: used, Year of construction: 1987, turning diameter 400 mm turning length 600 mm Bledpfeyutruex Af Hjk swing diameter 600 mm spindle bore 73 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2001, turning diameter 290 mm turning length 850 mm swing diameter 600 mm control Siemens type 840 D mm spindle passage 103 mm turning speeds 3000 U/min live tooling 3000 U/min rapid travel - grinding spindle 25 m/min total power requirement 65 kW weight of the machine ca. 11 t Serial No. 1130.2011-30 Equipment: Main spindle / counter spindle Bljdpfx Asyqv Auof Hjk 2 power chucks 2 tool turrets C-axis Cabin Chip conveyor Coolant system 22 bar Offer price without tools Optional accessories available for purchase: 106 tool holders for internal and external machining, 20 driven tools (including 10 angle tools) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter 280 mm turning length 800 mm control Siemens type 840 D turning speeds 4000 U/min swing diameter 320 mm 3 jaw chuck Forckrath 250 mm Machine has been overhauled The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Bjdeyqv Epjpfx Af Hjlk If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance Y-axis: 2,400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, spindle speed (max.): 18,000 rpm, Long-Bed CNC Lathe – High-Precision Cylindrical Carving The CNC lathe with numerical control is the ideal solution for machining cylindrical wooden parts, offering an excellent blend of automation, precision, and efficiency. This high-performance machine compensates for the lack of skilled labor, ensuring perfect repeatability and maintaining the same dimensions and quality for every part produced. Perfect for long and detailed processing With a working length of up to 2400 mm, the lathe allows for the creation of elements such as balusters, columns, table legs, decorative pieces, or church furniture components – all carved from a single piece, with no joints. Its robust design and welded frame made of thermally treated rectangular profiles ensure long-term stability and precision. High-quality components for consistent performance Professional linear guides (HIWIN) on X, Y, and Z axes: smooth, vibration-free movement Hybrid servo motors: precise control of speed and positioning Rack-and-pinion drive: efficient and accurate axis movement Water-cooled motors: operate up to 18,000 rpm without overheating Self-centering chucks and adjustable tailstock with cylindrical guides: secure grip for various part sizes Smart control and simplified operation The DSP system with internal memory allows fast file import via USB and automatic project resume after interruptions. It includes advanced calibration functions, zero-point setting, and speed adjustments, offering full production flexibility. Built for durability and energy efficiency Optical sensors: maintain accurate axis positioning Automatic lubrication pump: easy maintenance and extended machine life Low energy consumption: meets modern energy efficiency standards Key Benefits ✔ High accuracy and repeatability ✔ Long-part machining with no joints ✔ High efficiency, reduced costs ✔ Versatile for furniture, decorative, and specialty part production The long-bed CNC lathe is the ideal choice for workshops and factories seeking top-tier performance, versatility, and consistent quality in wood processing. Maximum Working Length 2400 mm Maximum Working Diameter (Ø) 400 mm Number of Working Units 1 Control System DSP Workpiece Rotation Speed 0–2500 rpm Spindle Motor Power 4.5 kW Spindle Speed 18,000 rpm Inverter “BEST” inverter Drive Motors Hybrid Servo Motors Bedpfswh Sc Hsx Af Hslk Maximum Feed Rate 50 mm/s Precision 0.0125 mm Power Supply 400 V – 3 Phase – 50 Hz Technical Support Available In Romanian, English, German