Used Mazak Multiplex 420 for sale (357)

Condition: ready for operation (used), Year of construction: 1999, spindle motor power: 22,000 W, number of axes: 3, This 3-axis Mazak Multiplex 6200 was manufactured in 1999 and features dual spindles with a maximum speed of 5,000 rpm and a drive power of 22/15 kW each. It includes an ABB robot and turrets on both the right and left with 12 tools each. Rapid traverse rates are 30.5 m/min for the X-axis and 33 m/min for the Z-axis. If you are looking to get high-quality turning capabilities consider the Mazak Multiplex 6200 machine we have for sale. Contact us for more information. Nsdpfxex Nr S Ds Ag Iowc Machine Benefits Technical Machine Benefits • Right and left turrets: 12 tools each • Axes: 3; including abb robot • Main motor: 200 v

Condition: used, Year of construction: 2011, Ma.-No. 327233239, control unit Mazatrol Matrix 2, travel paths X/Z 450 x 150 mm, main spindle, sub-spindle, 2x 8-position tool turrets with driven tool stations, tool holder VDI 40, 2 spindle units, max. spindle speed 5,000 rpm, max. machining length 530 mm, max. spindle bore 51 mm, tool measuring system, operating hours approx. 34,987, gantry loader, make Mazak, type Flex-GL100F, conveyor belt, L 6,000 mm, workpiece table, belt filter unit, make Knoll, type KF 400, chip conveyor, make CROMAR, tool and accessory package Nedoyffvtopfx Ag Iswc +++ Note: This machine is part of an online auction! +++

Condition: used, Year of construction: 2007, swing dia. 430 mm Distance between the spindles 1450 mm control MAZATROL 640T x-axis 310 mm z-axis 605 mm spindle tunring speed 4.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Gantry Loader Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Nwjdpfx Agoyb S Nre Ijc Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2003, Max. turning dia. 320 mm Nedpfx Agsyhzfgo Ijwc Max. turning length 450 mm Spindle speed 5000 rpm Spindle speed on live tools 4500 rpm X/Z - 240/495 mm Y-axis +/- 50 mm No. of stations in turret 2 x 12 pcs Control: Mazatrol PC-Fusion 640 T Equipped with: Gantry loader w/feeder

Year of construction: 1992, condition: ready for operation (used), Turrets: 2, tool stations: 12, tool holder: VDI 40, max. turning diameter: 320mm, max. swing diameter: 390mm, spindle bore: 61mm, speed: 5000rpm, spindle power: 15kW, travel X/Z: 230mm/430mm, machine dimensions X/Y/Z: 3900mm/2000mm/2900mm, weight: approx. 8600kg. Including robot. Documentation available. On-site inspection is possible. Nwedpfxsyhgpao Ag Isc

Condition: used, Year of construction: 2002, Max. diameter 430 mm Max. length 600 mm Max. spindle speeds 4000 rpm Max. spindle speed on live tools 4000 rpm X/Z travel - 310/605 mm Nedpfx Asxfcbfog Iswc 2 x 12 station turrets Control: Mazatrol PC Fusion 640 T Equipped with: Various toolholders

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in good condition. It is powered up and can be inspected by appointment. Available: immediately Year of manufacture: 2014 Commissioning: January 2015 Operating hours: --> see picture Machine no.: 252 153 Control unit: Matrix II Travel X1/X2: 310 / 310 mm Rapid traverse X1/X2: 24 / 24 m/min Travel Y1/Y2: ±77 / ±77 mm Rapid traverse Y1/Y2: 10 / 10 m/min Travel Z1/Z2: 605 / 605 mm Rapid traverse Z1/Z2: 24 m/min Drive power: 19.5/22 kW Max. spindle speed: 4,000 rpm Tool turret: 2 x 12 stations Live tool drive: 4,000 rpm Live tool motor: 7.5 kW Dimensions: 7,723 x 4,313 x 3,335 mm (L x W x H) Weight: 12,200 kg Voltage: 400V Fuse protection: 80A Note: The machine is factory equipped with the “Relocation Detector”. Upon re-commissioning, the machine must be unlocked by Mazak. Options: - Y-axis - GL200F gantry loader - Air blow device for workpiece handover - Chip conveyor, rear discharge - Cylinder and polar interpolation (EIA) - High-pressure pump and return pump (original pumps available) Accessories HD 1: - Kitagawa B-210 power chuck - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Accessories HD 2: - Kitagawa B-210 power chuck - 3 turning tool holders Nodpoi Ik Hkofx Ag Iewc - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Price Incoterms EXW (loaded onto provided truck) We also offer a tool holder package for this machine (see last picture). Note: this is a separate lot, not part of the machine offer. Composed of: Static holders: 2 pcs. external turning tool holder 13 pcs. facing tool holders 3 pcs. parting-off holders 5 pcs. Ø 32 boring bar holders 2 pcs. Ø 40 boring bar holders 8 pcs. Ø 50 boring bar holders 23 pcs. reduction sleeves Driven tools: 2 pcs. axial drilling and milling head SK40 8 pcs. radial drilling and milling head SK40 3 pcs. radial drilling and milling head ER40 5 pcs. angle heads The original value of the entire package was approx. €85,000.00 Available: after sale of the machine Price (negotiable): €35,000.00 (INCOTERMS EXW, without transport)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Turret stations: 24 Tool holder / Turret type: VDI MACHINE DETAILS Electrical and Safety Voltage: 400 V Protection class: 1 Connected load: 77.4 kW Footprint & Weight Footprint: 6.5 m² Machine weight: 7,900 kg Nodpjx Dmm Asfx Ag Iewc EQUIPMENT Portal loader GL 100 F

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, empty load weight: 8,400 kg, Submitting a bid obligates you to collect the item on time in calendar week 1 or 2 of 2026! Lathe with portal loading! MACHINE DETAILS Weight: 8,400 kg Nwodpfxsxzudkj Ag Iec

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, empty load weight: 8,400 kg, Submission of a bid obligates timely collection in calendar week 1 or 2 of 2026! Nwjdpfx Agexzubpo Iec Lathe with gantry loading! MACHINE DETAILS Weight: 8,400 kg

Condition: used, Year of construction: 2004, Mazak Multiplex 6300 Mazatrol 640T Njdpfx Aev Tvkajg Iswc YOM: 2004-11 approximately 20 pcs tools Mazak Flex-GL200F More information is coming soon.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 495 mm, bar diameter (max.): 51 mm, TECHNICAL DETAILS Machining diameter: 320 mm Turning diameter over slide: 320 mm Machining length (chuck workpiece): 180 mm Bar capacity: 51 mm Travels and feeds X-axis travel: 240 mm Y-axis travel: 100 mm Z-axis travel: 495 mm X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 10 m/min Z-axis rapid traverse: 33 m/min Spindles Number of headstocks: 2 Main spindle speed: 5,000 rpm Main spindle motor power (30 min / 100%): 22 / 15 kW C-axis resolution: 0.001° Spindle bore: 61 mm Counter spindle speed: 5,000 rpm Counter spindle motor power (30 min / 100%): 22 / 15 kW C-axis resolution: 0.001° Tool turret Number of tool positions: 2 x 16 Tool shank height: 25 mm Boring bar shank diameter: 40 mm Turret: with driven tools Driven tools Speed: 4,500 rpm Drive power: 3.7 kW MACHINE DETAILS Spindle chuck: Kitagawa B-208 (210 mm) Control: Mazatrol 640T Machine weight: 8,400 kg Nwjdpfowi Na Ssx Ag Ijc EQUIPMENT - 2 x 16-station tool turrets - CNC option package EIA / ISO programming - Air purge device on the chuck - Flex GL 150F gantry loader with pallet conveyor - Tool-Eye - Partition wall - High-pressure cooling 70 bar - Chip conveyor Mayfran ConSep 2000 II

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640 Nexus, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 410 mm Travel Z-axis: 510 mm Table dimensions: 900 mm x 410 mm Spindle speed: 12,000 rpm Nwedpfx Agjymzmke Isc Tool holder: SK40 Number of stations in tool changer: 30 Internal coolant supply: 15 bar MACHINE DETAILS Control: Mazatrol 640 Nexus Machine weight: 5,010 kg EQUIPMENT Chip conveyor

Condition: good (used), Year of construction: 2013, Swing over bed 660mm, maximum machining diameter 350mm, maximum machining length 540mm, bar capacity 65mm, Nsdpfx Asyna Ngog Iowc spindle speed 5,000rpm, 12 station turret, Mazatrol Smart control, swarf conveyor, & 3 jaw chuck.

Condition: used, Year of construction: 2022, turning diameter 276 mm turning length 500 mm control Mazatrol Smooth G max. swing diameter over bed 695 mm Distance spindle end - turret 710 mm bar material dia. max. 65 mm turning speed range - spindle 35 - 5000 U/min max. torque on the spindle 465 Nm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min spindle nose A2-6 spindle passage 76 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW tailstock quill taper MT 5 Travel- tailstock 550 mm Tool turret 1 Numbers of tools 12 (angetrieben) tool taper VDI 30 min rated capacity 42,6 kVA Required air-pressure 0,5 / 330 MPa / l/min distance spindle /table 710 mm total power requirement 37 kW weight of the machine ca. 5,7 t dimensions of the machine ca. 2,8 x 2 x 1,9 m Nodpfx Agsynbd Se Iswc With the following special accessories: - Mayfran chip conveyor, side ejector, hinged belt conveyor - Engraving function ACCESSORIES / MACHINE OPTIONS Automatic on/off switch and warm-up function A warm-up is necessary to avoid problems such as abnormal wear of the sliding surfaces and sluggish movement. A sufficient warm-up provides the machine with the heat resistance it needs to machine workpieces with consistent, high precision. Transformer for the European market 8" chuck for main spindle with enlarged passage USB connection (1 connection) Mazak standard colour Main spindle motor AC 26 kW Tool turret with 12 stations VDI, also for driven tools in every position. For maximum performance, only the cutting tool is driven. Programmable tailstock (MK5) Tailstock quill (MK5) Y-axis control SAFETY DEVICES Operator door with lock switch Double foot switch Opening and closing of the chuck by means of a separate switch. Hydraulic pressure lock Fully enclosed work area Work area lighting COOLANT SUPPLY High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system CHUCK, ETC. Automatic opening/closing of chuck jaws 8" power chuck with enlarged passage (main spindle) Kitagawa BB208 MEASURING SYSTEM Automatic Tool Eye NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (shared variables: 600 pairs) Mazak tapping/drilling cycle Tornado in EIA/ISO. (Only possible on machines with Y-axis. EIA/ISO package EIA/ISO input function EIA/ISO additional functions - Helical interpolation - 3D tool correction - Workpiece coordinate rotation - Geometric function - Scaling - External data input/output Thread cutting function (G33) Reverse time feed G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop (optional stop) Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak thread tapping/drilling cycle Tornado in EIA/ISO. EIA/ISO drilling cycles (arc, grid, circle, circular arc, line) Machining on inclined surfaces EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Interface for LAN SD memory card I/F Smooth standard software for lathes (milling) MAZACC 2D software Workpiece shape compensation Rapid traverse paths Rounding function - Seamless co...

Condition: used, Year of construction: 2012, turning diameter 203 mm turning length 300 mm control Mazatrol Smart Distance spindle end - turret 99-434 mm max. turning diameter 280 mm bar material dia. 51 mm travel -x axis 200 mm travel -z axis 340 mm spindle turning speed range 35 - 6000 U/min rapid traverse X-axis 33 m/min rapid traverse Z-axis 36 m/min spindle bore 61 mm Tool turret 12 -fach turning tool - shaft cross cut 20 Boring bar- Ø 32 mm workpiece weight 150 kg spindle nose A2-5 taper in tailstock-quill MK4 Travel- tailstock 350 mm total power requirement 16,3 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,9 x 1,6 x 1,8 m Special accessories: Autom Tool Eye Spindle orientation Signal light Additional coolant nozzles above the chuck Automatic switch-off Interface for bar feed Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece tray Chip conveyor, side ejection Includes: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, however max. headstock length /UVV Weight max. 67 kg / bar Burr-free bars or bar sections Depth 600 mm for holding bars Input voltages from 200 – 460 volts / operating voltage 24 V DC, LNS control programmed on SIEMENS STEP 7 PLC, flexible control panel with large screen, user guidance via symbols for easy operation and adjustment. Nwjdpeynbd Ejfx Ag Ioc Device cover with 2 viewing windows made of Plexiglas.

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Nwsdpfx Agsxp Rywj Ioc Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: used, Year of construction: 2016, The Mazak VTC 800 series is a line of powerful, large-format 5-axis turning centers for large workpieces, known for their high precision and rigidity, ideal for aerospace, energy and heavy machinery, with functions such as integrated spindles, fast tool change, and for efficient complete processing. Accessories/Options: Tool magazine for 30 tools Tool length measurement, tool breakage detection Factory-installed preparation for chip conveyor (left) Magazine (HSK) for 155 tools Air blower at the workpiece Signal light (end of machining: yellow) Additional: Work area lighting Coolant gun Air blower through the spindle 70 bar preparation, including interface for high-pressure system Automatic opening/closing of the operator door Mazak Monitoring System B RMP 60 (only/H/V) Collision monitoring by Brankamp 2 Renishaw TS27R tool presetting devices NC rotary table Holding device for vertical use of the NC rotary table Table center partition for pendulum machining 3D model of the work area in STEP format 5-axis milling technology Knoll compact filter KF400/2300 (filtration capacity 400 l/min, tank volume 2300 l/min) 1) High-pressure cooling 70 bar, 7 pressure stages Chip conveyor, hinged belt design Additional M-codes: 1 set = 2 M-codes Preparation for dual extraction system (mechanical nozzle) 0.198 mm Transformer for the European market 1 set of manuals in electronic form on CD 1 set of adjustment tools Foundation set (anchor bolts + plates) MAZAK standard paint Work area lighting Additional items: AirFresh FMN V12 extraction system (installed on both sides and coupled with a door sensor) Holding device for vertical operation of the rotary table 2 x Renishaw TS27R integrated tool presetting devices Spare parts: Y-axis motor, tool magazine Linear axis shifter motor Rotary axis shifter motor Cylinder for swivel unit width: 3500 mm length: 820 mm X-axis travel range: 3000 mm Y-axis travel range: 800 mm Traversal range Z-axis: 720 mm min. distance spindle nose to table top: 140 mm max. distance from spindle nose to table top: 860 mm max. table load: 2500 kgf B-axis: ± 110 degrees Working spindle taper: HSK63 Max speed: 18,000 RPM Min. Drehzahl: 35 min-1 Rated power: ( 100 % continuous operation) 33,0 kW Emergency travel speed X-Y & Z axis: 50 m/min Working table width: 3500 mm Worktable length: 820 mm Width of T-slots: 18 mm Number of T-slots: 7 Distance of T-slots: 100 mm Table height from the floor: 870 mm Tool changer number of tool places (Standard): 30 Number of tool stations (optional): 48 Tool selection method: shortest path tool shank: Steep cone 40 With occupied side positions: 80 mm With available spaces: 130 mm max. tool weight: 8kgf Total weight of all magazine tools: 150 kgf Nsdpfx Aex Idwieg Iswc max. tool length: 350 mm Tool change time: (Span-to-Span) 4.7 s Connected load: 400 V / 50/60 Hz Air pressure: 5 – 9 bar Air volume: 260 l/min Tank capacity: 500 l Dimensions (Height x Length x Width): 3376 x 5480 x 4051 mm Weight approx: 16300 kg colour: Gray / Black

Condition: used, Year of construction: 2008, functionality: fully functional, Control: MAZATROL 640 workpiece diameter, max.: 1.050 mm workpiece length, max.: 1.000 mm Nwodpfeynk Ugsx Ag Isc Max. Spindle speed: 10.000 rpm table speeds: 500 rpm table drive: 37 kW number of tools: 80 number of paletts: 2 chucking diameter: 800 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Control: MAZATROL 640 workpiece diameter, max.: 1.050 mm workpiece length, max.: 1.000 mm Max. Spindle speed: 10.000 rpm Nedpfx Aoynk Efog Iowc table speeds: 500 rpm table drive: 37 kW number of tools: 80 number of paletts: 2 chucking diameter: 800 mm

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Mazak QT10 + LNS Bar Loader Technical Data: Working Area: - Max. swing diameter: 300 mm - Over cross slide: 190 mm - Max. turning diameter: 110 mm - Max. turning length: 256 mm Main Spindle: - Speed range: 60 – 6,000 rpm - Main drive power: 7.5 kW - Constant torque: 96 Nm - Bar work up to max. diameter: 40 mm Turret: - Number of tool stations: 8 Axes Travel: - Turret travel: - X-axis: 100 mm - Z-axis: 290 mm Traverse Speed: - Rapid traverse: - X-axis: 30.5 m/min - Z-axis: 33 m/min - Feed range: 0 – 5,000 mm/min Machine Data: - Total connected load: 23 kVA - Machine weight: approx. 2,700 kg - Machine dimensions (L x W x H): approx. 2.00 x 1.35 x 1.92 m STANDARD ACCESSORIES: Njdsym Tx Eepfx Ag Iswc - Tool presetting device (MAZAK Tool Eye System) - Fully enclosed work area with coolant and chip protection - Double foot switch for chuck open/close - Chuck status feedback (open/closed) - Work area lighting - Documentation SPECIAL ACCESSORIES: - Automatic chuck open/close M06/M07 - Indicator lamp for machining status - Various tool holders

Condition: ready for operation (used), Year of construction: 2016, operating hours: 16,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,376 mm, table load: 2,500 kg, overall weight: 16,300 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 33,000 W, tool weight: 8,000 g, product length (max.): 5,480 mm, number of axes: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016, featuring a robust vertical machining center with a table width of 3,500 mm and length of 820 mm. It boasts a maximum speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine includes a 30-position tool changer and can handle a maximum tool weight of 8 kgf. Consider the opportunity to buy this Mazak VTC 800/30 SR vertical machining center. Contact us for more information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table top: 140 mm • Max. distance spindle nose to table top: 860 mm • Work spindle • tool holder HSK63 • Feed rates • Rapid traverse speed X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • With adjacent positions occupied: 80 mm • With adjacent positions free: 130 mm • Total weight of all magazine tools: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz Njdpjx Nkp Usfx Ag Iowc • Air pressure: 5–9 bar • Air flow rate: 260 l/min • Tank capacity: 500 L Additional equipment • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mounting bracket for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetting devices • Spare parts: • Y-axis motor for tool magazine • Linear axis shifter motor • Rotary axis shifter motor • Cylinder for swivel unit

Condition: excellent (used), Year of construction: 2018, operating hours: 2,472 h, functionality: fully functional, travel distance X-axis: 470 mm, travel distance Z-axis: 876 mm, spindle motor power: 30,000 W, spindle speed (max.): 1,250 rpm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, turning diameter: 1,000 mm, total length: 2,375 mm, total height: 3,659 mm, total width: 4,558 mm, type of input current: three-phase, torque: 3,655 Nm, input voltage: 400 V, overall weight: 13,000 kg, Equipment: cooling unit, CNC Vertical Lathe MAZAK Mega Turn 900 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2018 CNC control: MAZATROL SmoothG Max. turning diameter: 920 [mm] Max. cutting diameter: 1000 [mm] Stroke X axis: 470 [mm] Stroke Z axis: 876 [mm] Rapid traverse rate X axis: 24000 [mm/min] Rapid traverse rate Y axis: 24000 [mm/min] Spindle nose: A2-15 Max. spindle speed: 1250 [rpm] Spindle power: 30 [kW] Spindle torque: 3655 [Nm] Max. distance from spindle face to turret face: 1030 [mm] Max. workpiece weight: 3000 [Kg] Min. distance from spindle face to turret face: 154 [mm] Number of tool stations: 12 Turret indexing time: 0.4 [s/pos] Lubrication tank capacity: 516 [l] Total power required: 58.9 [kVA] Rated current: 109 [A] Supply voltage: 400 [V] Nwsdpfsym Surex Ag Isc Working hours: 2472 [h] Number of cutting hours: 2297 [h] Dimensions: 2375 × 4558 × 3659 [mm] Weight: 13000 [Kg] INCLUDED EQUIPMENT: x1 Ø800 mm chuck, KITAGAWA type NV-32C1515 x1 set of hard jaws x2 sets of soft jaws x10 tool holders (chair type) x24 KENNAMETAL type KM50 tool holders x1 retractable tool probe arm x1 double pedal unit for chuck clamping x1 coolant tank x1 chip conveyor x1 LOSMA type Galileo GP500 mist extractor x1 set of 4 lifting brackets x1 set of axis locking brackets (for machine transport) x1 MAZAK toolbox containing various service wrenches Various programming manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Biglia, Index, Tsugami, Miyano, Star, and DMG Mori Tornos lathes, but also milling machines, grinding machines, and CNC.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,545 mm, travel distance Z-axis: 25 mm, overall weight: 14,800 kg, table load: 930 kg, number of axes: 3, This 3-axis Mazak Hyper Gear 510 was manufactured in 2005. It features an X-Y-Z axis stroke of 3070 × 1545 × 100 mm and a maximum workpiece size of 3050 × 1525 × 25 mm. With a rated laser output of 4000 W, this CO₂ laser cutting machine is designed for precision cutting. If you are looking to get high-quality cutting capabilities, consider the Mazak Hyper Gear 510 machine we have for sale. Contact us for further details. Nodpfxjymn Dve Ag Ijwc • Max. workpiece size: 3050 × 1525 × 25 mm • Rated laser output: 4000 W • CO₂ laser model: YB-L400A 8M (5E) • NC unit: Mazatrol Preview

Condition: good (used), Year of construction: 2003, operating hours: 24,000 h, functionality: fully functional, machine/vehicle number: 1160597, turning diameter: 380 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,100 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 5,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 NEXUS, milling spindle speed (min.): 25 rpm, milling spindle speed (max.): 4,500 rpm, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, MAZAK QUICK TURN NEXUS 200 CNC Lathe - Operating voltage: 415 V - Frequency: 50/60 Hz - Maximum swing diameter: 675 mm - Standard turning diameter: 276 mm - Maximum turning diameter: 380 mm - Maximum bar capacity: 65 mm - Distance between spindle nose and turret face: 135 - 1220 mm - Tailstock travel range: 1050 mm - External turning tool size: 25 mm diameter - Internal turning tool size: 40 mm diameter - Milling drill capacity: 20 mm - Milling tap capacity: M 12 - Rapid traverse C-axis: 400 rpm The machine is equipped with a tailstock, a collet chuck, and a chip conveyor. Nsdpfxeym Rxij Ag Iowc Please note: The item must be definitively collected between 21.04. and 30.04.2026 at a yet to be determined time. FCA D-96257 Marktgraitz – loaded onto truck