Used Mazak V 515 for sale (305)

Condition: used, Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, overall weight: 8,900 kg, table length: 550 mm, table width: 1,300 mm, controller model: 640 M, spindle speed (max.): 6,000 rpm, spindle speed (min.): 25 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg Movement X-Axis: 1050 mm Duedpfx Aoy Nz Etjhnsu Movement Y-Axis: 510 mm Movement Z-Axis: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 -6000 1/min. Magazine capacity: 30 positions Weight of the machine: 8900 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: 640M, total height: 2,823 mm, total width: 3,160 mm, table load: 1,500 kg, overall weight: 8,900 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, tool weight: 20,000 g, product length (max.): 3,436 mm, number of axes: 4, This 4-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details. • Milling capacity in S45 (JIS): 634 cm³/min • Drilling capacity in S45 (JIS): 50 mm • Table Size: 1,300 mm x 550 mm • Table Configuration: 5 T-slots, 100 mm distance, 18 mm reference groove • Table Height from Floor: 800 mm • Spindle Nose to Table: 200 mm - 760 mm • Spindle Center to Column: 525 mm • Rapid Traverse (X/Y): 26 m/min • Rapid Traverse (Z): 20 m/min • Feed Rate (X/Y/Z): 8 m/min • Min Spindle Speed: 25 rpm • Max Torque: 758 Nm • Max Tool Diameter: 125 mm (adjacent occupied) / 260 mm (adjacent free) Dodpfx Ajy I Amvehnjuu • Max Tool Length: 400 mm • Chip-to-Chip Time: 5.5 s • Coolant Tank Capacity: 200 L • Coolant Pump Power: 0.75 kW • Connected Load (30 min/100%): 41.2 KVA / 36.2 KVA • Compressed Air Supply: 5 kg/cm², 200 L/min Additional equipment • Extraction System: Donaldson Torit DCE • Chip Conveyor: Mayfran

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 1,345 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 10 rpm, CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Dedpfx Ahjy Ey Tbenjuu Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, table load: 1,200 kg, rotational speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,660 mm Travel range Y-axis: 760 mm Travel range Z-axis: 660 mm Table size: 760 x 2,000 mm Table load capacity max.: 1,200 kg Tool holder: SK 40 Tool changer: 2 x 24 Tool diameter max.: 80 mm Tool diameter with free adjacent slot max.: 110 mm Tool length max.: 350 mm Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min MACHINE DETAILS Control system: MAZATROL M-PLUS Dimensions & Weight Space requirement: approx. 6.0 x 4.0 x 3.5 m Dedjzb D N Repfx Ahnouu Machine weight: approx. 8.1 t Total power requirement: 32.8 kVA The machine has been regularly serviced.

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Control System: Mazatrol Matrix Nexus Table Size: 1300 mm x 550 mm Maximum Table Load:1200 kg X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Rapid Traverse (X/Y/Z): 36 m/min Djdpfsyh N Aajx Ahneuu Weight: ~ \(6900\) - \(7100\) kg Machine Dimensions 3870 x 2819 x 2842mm Control System: Mazatrol Matrix Nexus Specs: X 1050 Y 510 Z 510 / 12,000RPM / BT40 Accessories: Tool setter and swarf conveyor

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: MAZATROL Smooth, workpiece weight (max.): 2,500 kg, total height: 3,419 mm, total length: 5,250 mm, total width: 4,300 mm, table width: 820 mm, table length: 3,500 mm, overall weight: 16,800 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 48, tool length: 350 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, CNC Machining centre MAZAK VTC 800 30SR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 CNC control: MAZATROL Smooth Number of simultaneous axes: 5 Stroke X axis: 3000 [mm] Djdpfxsy U Udys Ahnjuu Stroke Y axis: 800 [mm] Stroke Z axis: 720 [mm] Feed rate on X, Y and Z axes: 50000 [mm/min] Traversing feeds X, Y and Z axes: 50000 [mm/min] Min. distance spindle nose / table: 140 [mm] Max. distance spindle nose / table: 860 [mm] Table length: 3500 [mm] Table width: 820 [mm] Max. load on table: 2500 [Kg] B axis swivelling stroke: +110 [°] / -110 [°] [°] Table surface: Ø 500 [mm] Stroke C axis: table revolution 360 [°] Spindle type: CAT No.40 Max. spindle speed: 18000 [rpm] Spindle power: 35 [kW] Tool changer magazin number of stations: 48 Max. tool lenght: 350 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 80 - 130 [mm] Machine dimensions: 5250 x 4300 x 3419 [mm] Weight: 16800 [Kg] INCLUDED EQUIPMENT: x1 MAZAK type DS50C-R1-Z5th-axis NC rotary table Ø500 [mm] – 360,000 positions x1 electronic handwheel x1 spindle chiller x1 high-pressure coolant pump 15 [bar] x1 chip conveyor More information upon request.

Condition: used, Year of construction: 2012, Mazak Variaxis 500-5X II 5 Axis CNC Machining Centre with Mazatrol Matrix Control. S/No. 244505 (2012) 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 405mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Kouwa Spindle Chiller Unit, Cromar Swarf Management and Filtration System, OMF 1000 Oil Mist Filter Extraction, Renishaw RMI Tooleye, Machine Weight 7500kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dujdpfjzcpcljx Ahnou

Condition: used, Year of construction: 2016, Mazak Vertical Centre Smart 530C CNC Vertical Machining Centre with Mazatrol Matrix 2 Control. S/No. 270242 (2016), Table Size 1300mm x 550mm, Spindle Speed Max 12,000rpm, 30 Tool Drum Type ATC Fitted with Various Tool Holders and Renishaw Probe, CAT40 Spindle Taper, LNS Turbo MH500 Swarf Conveyor, Machine Weight 6800kg, User Manual on CD. Country of Origin: United Kingdom Dsdpjzcn T Ajfx Ahnjuu Lot 8 of Auction 3476. See more information on the website. Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2015, Mazak Variaxis i-500 5 Axis CNC Machining Centre with Mazatol Matrix 2 Control. S/No. 259047 (2015), 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm, Max Workpiece Weight 300kg, CAT40 Spindle Taper, 40 Tool ATC, Mazak Spindle Chiller Unit, Vokes Air Scandmist 70D Oil Mist, Filter Extractor, Cromar Swarf Managment and Filtration System, Renishaw RMI - Q Tool Eye, Machine Weight 8000kg Please Note: Erowa Machining Fixture Not Included Lot 5 of Auction 3476. Visit cottandco website for more details. Djdpfx Aozcn Imehneuu Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: refurbished (used), Overhauled Mazak main spindle for VTC 200 or VTC 300 for sale. The spindle has been fully overhauled, spindle bearings and intermediate sleeves have been replaced. The taper has been reground. Subsequently, it has been balanced. The maximum speed is 12,000 rpm. We have additional overhauled Mazak spindles in stock; feel free to send us your inquiry. This is an exchange spindle, meaning a core return is required. If you have any further questions, we are at your disposal. Dujdpfx Ahevdkdijnsu

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates Dodpfx Aevc Avbehnjuu *

Condition: used, Year of construction: 1998, x-travel 1120 mm y-travel 510 mm z-travel 510 mm control Mazatrol M Plus spindle turning speed range 0-7000 U/min tool taper Cat 40 tool piece magazine with 24 Plätzen max. table load 500 kg table dimensions (lengthxwidth) 1460 x 510 mm Overall size 3600x2700x2590 mm machine weight ab. 5850 kg Equipment/Accessories: - 4 vices Dodpfey Ty Easx Ahnsuu - 1 chuck - 18 tool holders with tools - Transport locks - USB flash drive with data backup - Technical documentation Price includes data backup, disassembly, and loading.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 141643, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: MAZAK, controller model: MAZATROL M PLUS, total height: 2,250 mm, total length: 4,400 mm, total width: 2,400 mm, table width: 510 mm, table length: 1,460 mm, table load: 500 kg, overall weight: 6,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 24, mount diameter: 40 mm, tool length: 350 mm, tool diameter: 80 mm, tool weight: 8,000 g, Equipment: chip conveyor, MAZAK VTC-20 B Vertical Machining Center - Tool holder: SK 40 - Max. distance from the spindle face to the clamping surface: 690 mm - Cutting feed rate X/Y/Z: 1 - 5000 mm/min - Max. tool diameter: 80 mm with an occupied adjacent position - Max. tool diameter with a free adjacent position: up to 110 mm Djdpfey Twcvsx Ahnouu - Incl. chip conveyor MAYFRAN - Incl. the tool holders located on the tool changer - Note: the machine vise clamped on the table is not included in the scope of delivery! Note: the item must be collected between July 14th and July 16th, 2026, on a date to be agreed upon. FCA D-45883 Gelsenkirchen - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours 12 minutes 03 seconds (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours 38 minutes 37 seconds- Automatic Machining Time: 5,877 hours 48 minutes 01 seconds- Operating Time / Power On Time: 26,902 hours 54 minutes 33 seconds- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine Technical Specification Dsdpfey T Hbzox Ahnsuu Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 Dsdpfx Ajy Txrxohnsuu - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc Duodovry T Njpfx Ahnju 10x tool holder vdi 40 euro 90/pc pallet 7 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Condition: used, Year of construction: 1996, x-travel 1500 mm y-travel 650 mm z-travel 650 mm size of pallet 1740 x 650 mm spindle taper SK 50 spindle turning speed range 25 - 6000 U/min feeds longditudinal/cross/vertical max. 8 mm/min rapid traverse longitudinal and cross 26 m/min rapid traverse vertical 20 m/min spindle throat 665 mm distance spindle nose and table 200 / 850 mm drilling in full material 50 mmø threading M 45 ATC 60 Pos tool diameter 125 mm wotkpiece diameter with 2 vacant positions 260 mm workpiece length 400 mm weight of tools max. 20 kg spindle drive 18,5 kW control MAZATROL M PLUS Dujdoyg N Shjpfx Ahnju Accessories: chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion-CNC 640M, total height: 2,651 mm, total width: 2,825 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 2,915 mm, number of axes: 3, This 3-axis Mazak VTC 200 B was manufactured in 2001. It features an impressive X-axis travel of 1120 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1460 x 510 mm and a maximum table load of 800 kg. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 200 B vertical machining centre we have for sale. Contact us for further details. • Machining capacity: • Milling (S45 JIS): 416 cm³/min • Drilling (S45 JIS): 25 mm • Tapping (S45 JIS): M24 x P3 • Table: • Size: 1460 × 510 mm • T-slots: 5 • T-slot pitch: 100 mm • T-slot width: 18 mm • Table height: 750 mm • Spindle: Duedpfey S Sw Sjx Ahnsu • Spindle nose to table: Max 690 mm / Min 180 mm • Spindle center to column: 530 mm • Spindle motor: • 10 min: 15 kW • 30 min: 11 kW • Continuous: 7.5 kW • Max torque: 98 Nm • Rapid traverse: • X: 30 m/min • Z: 30 m/min • Cutting feed rate: • X: 8 m/min • Z: 8 m/min • Tool changer: • Tool type: CAT40 • Max tool Ø with adjacent tool: 80 mm • Max tool Ø without adjacent tool: 110 mm • Max tool length: 350 mm • Tool change time (chip-to-chip): 4.7 s • Coolant system: • Tank: 300 L • Pressure: 0.5 kg/cm² • Flow: 20 L/min • Electrical data: • Installed power: 22.7 kVA • Air supply: • Pressure: 5 kg/cm² • Consumption: 140 L/min • Standard equipment: • Full enclosure • Through spindle coolant • Automatic tool length measurement • Adaptive feed control • Tool life monitoring • Tool breakage detection • RS-232C interface • PCMCIA interface • 3.5" floppy disk reader • CE compliant machine • Side chip conveyor preparation • Note: Machine is prepared for a side chip conveyor (conveyor not included) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function and Top Specification. Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. work height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - ICS (internal coolant supply) - Showa oil mist extraction unit - Renishaw probe The following features/options are available: - Linear scale system for X and Y axes - Tool magazine for 80 tools - Air blow unit at the workpiece - Oil mist extraction unit CRK 1500K - Coolant temperature control - Flood coolant 4.5 bar - Workpiece rinsing system - High-pressure coolant through the spindle 70 bar - Pressure switch for coolant supply through the spindle - Chip conveyor ejection right (Consep) - MAZAK Monitoring System B incl. Renishaw probe MP10 - Preparation for visual tool identification system - Detachable electronic handwheel - Milling spindle synchronous tapping - Tool tip inspection for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program memory 8 MB - Rapid traverse – constant tilt angle during movement - MAZACC-3D high-speed software package - Form compensation for rotary axes - Ethernet operation capability - High-precision control for finishing operations - Cylinder interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck 21" - Additional work area lighting Dodpjx Db D Aefx Ahnjuu The machine is in very good condition and can be inspected under power at its current location.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Technical Information for Mazak Corporation Mazak VTC-300C II: Model: Mazak VTC-300C II Machine type: Vertical CNC Machining Center Year of manufacture: 2003 Serial number: 162107 Accessories: Chip conveyor included Dujdpsy St E Rjfx Ahnsu Connected load: 28 kW Typical technical data for the Mazak VTC-300C II: Control: Mazatrol Fusion 640M / Mazatrol PC Fusion CNC Travel distances: X-axis: approx. 1,740 mm, Y-axis: approx. 760 mm, Z-axis: approx. 660 mm Table size: approx. 2,000 × 760 mm Table load capacity: up to approx. 1,400–1,500 kg Spindle taper: CAT 40 / BT40 Spindle speed: typically 10,000 rpm Main spindle power: approx. 18.5–22 kW Tool changer: 30 positions Rapid traverse: approx. 36 m/min Coolant system: included Machine weight: approx. 11,000–13,000 kg The machine is part of Mazak’s large VTC series and is particularly suited for: Large aluminum parts Steel machining Automotive production Fixture and series manufacturing

Condition: used, Year of construction: 1998, functionality: fully functional, Mazak VTC-20C CNC control: Mazatrol M PLUS Maximum travel: X 1660mm, Y 510mm, Z 510mm Work table: 2000mm x 510mm Maximum spindle speed: 7000 rpm Spindle taper: ISO40 Tool magazine capacity: 24 tools Dodpfx Aszcb Uyjhneuu Machine in very good condition. Fully refurbished.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, CNC control Mazatrol Matrix 2-fold pallet changing device NC-swivel rotary table 80-fold tool changer high pressure coolant through the spindle 20bar chip conveyor Technische Daten / technical details: Verfahrweg X / X-Travel 630 mm Verfahrweg Y / Y-Travel 765 mm Verfahrweg Z / Z-Travel 510 mm Schwenkbereich A-Achse / swivel range A-axis -120 - +30 ° Drehbereich C-Achse / rotary range C-axis 360 ° Tischgröße / table size 500x500 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpm Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / tool places in ATC 80 fach / fold Antriebsleistung Hauptantrieb / drive capacity main drive 26 kW Gewicht der Maschine ca. / weight 17000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Duodpfxstp Hgzo Ahnsu

Condition: used, Year of construction: 2005, travel distance X-axis: 730 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 560 mm, table width: 500 mm, table height: 500 mm, spindle speed (min.): 10,000 rpm, 5-axis Vertical Machining Centre CNC Control Mazatrol Fusion 640 M 5x Table size 500x500 mm Table load 500 kg Number of pallets 12 (PMC) Max workpiece Ø 730x500 mm Movement X/Y/Z-axis 730-850-560 mm C-axis (table rotation) 360° Djdpey Ryylofx Ahnjuu A-axis (table tilt) +30/-120 Spindle speed 35-10.000 1/Min Spindle Taper Big Plus BT50 Spindle motor 30/22 kW Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Voltage: 380V, frequency: 50Hz, spindle power: 10hp continuous, 15hp for 30 minutes, amperage of largest motor: 40/60A, KA. DC gradation: 10, control: Mazak MAZATROL T-1, weight: 4.5t, with programming manual. An inspection on site is possible. Dsdpozbb Rxjfx Ahnouu

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Djdpfx Ajyyybhohnsuu Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!