Tool room milling machine

DECKEL FP2

Condition: used, The machine can be inspected at our premises. Djdpfxjviq Tze Ahneuu

Condition: reconditioned (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Siemens, controller model: 840D, rotary table diameter: 800 mm, spindle speed (max.): 14,000 rpm, coolant supply: 20 bar, input voltage: 400 V, DMU 70 3+2 axes The machine is currently being overhauled. New spindle New Y & Z axis guides Bellows Inspection windows Dedpfx Ahoyx Am Rsnsuu Measured with BallBar incl. protocol Siemens 840D with Shopmill - handwheel 14,000 rpm SK40 spindle 30-position tool changer Internal coolant 20 bar Tank system with band filter 600 l Chip conveyor Cabin roof Measuring probe Rinse gun Operating mode 4 Documentation Available from 04/2026

Condition: new, centre height // mm total power requirement / kW weight of the machine ca. / t Duodpfszcgfqex Ahnju required space / m Parts machine for lids FP1 / FP2 Condition: NEW

Condition: reconditioned (used), Tool milling machine: Deckel Type: FP 2 Condition: Geometrically overhauled, used Year of manufacture: 1980s, geometric overhaul in 2026 Technical data: Travel distances X/Y/Z, approx.: 400 / 200 / 400 mm Tool holder: S20 Spindle speeds: (18) 40 - 2000 rpm Feeds: (18) 8 - 400 mm/min Head swivels: 180° Equipment: - 3-axis digital display, new Dsdpjzcdarjfx Ahnsuu - Spindle protection device with limit switch, new - Machine light, new - Horizontal and vertical spindle - Fixed angle table - Coolant system - Chip tray

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. Dusdpfjvc Amtsx Ahnsu The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, machine/vehicle number: 2819-0517, x-travel:300 mm y-travel:300 mm z-travel:400 (340 with Apron) mm surface area:390 x 620 / Chip tray mm turning speeds:40- 2500 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min control:Contour 3 - 3D path Control System spindle taper:SK40 quill stroke:60 mm milling-head swivable +/-:90* spindle drive motor:2,0 kW total power requirement:1,6 / 2,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,8 x 1,8 x 1,8 m Deckel FP2A Universal Milling Machine Dujdpfxecxxp Ts Ahnju - Spilndle Head can be swiveled 90 °, can be used as vertical and horizontal machining Center. - Rigid Angle Table: 620 x 390 mm (Max. Load 250 kg) - Extendible sleeves: vertically 80 mm, horizontally 60 mm - Hydralic clamping system SK40 with Pull studs DIN 2080 or DIN 69872 Seperate Power Cabin, Central Lubrication and Coolant System, Chip tray and Splash Gaurd

Condition: used, machine/vehicle number: 2801-0234, x-travel:300 mm y-travel:220 mm z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min spindle taper:SK 40 milling-head swivable +/-:90° quill stroke:60 mm Dedecxxm Espfx Ahnouu total power requirement:1,09 / 2,0 / 4,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,3 x 1,1 x 1,6 cm m Deckel FP2 NC Milling Machines. - Spilndle Head can be swiveled left or Right (90 °) - Angular Fixed Work Table: 620 x 390 mm (Max. Load 250 kg) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Electronic handwheel for Easy Axis movement - Deckel Dialog 4 CNC control Systems - Mechanical hand-wheels for all axes to operate manually, Central Lubricant system, Chip tray with Splash cabin

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Duodpotvb Iuofx Ahnju Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: used, machine/vehicle number: 0736, x-travel:800 mm y-travel:300 mm z-travel:400 mm work table::1000 X 440 Dedpfx Aecxxyhehnouu spindle turning speed range:40 - 2000 RPM/min turning speeds steps:18 feed range:10-500 mm/min feed steps:18 rapid traverse:1,50 m/min inner taper of milling spindel:SK40 total power requirement:2,2 kW weight of the machine ca.:2 t dimensions of the machine ca.:1,57 x 1,68 x 1,85 m Deckel FP2 LB Universal Milling Machine - Spilndle Head can be swiveled left or right (90°) - Rigid Angular Table: 1000 x 440 mm - Quick lever for Rapid Feed Travese Seperate Power cabin and has a Chip tray for clean safe working Area.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9585, DECKEL Universal Milling and Drilling Machine Model: FP 2 Machine No.: 9585 Year of manufacture: 1978/79 Condition: Good, operational condition Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Dusdpfeygicajx Ahnou

Condition: like new (used), Year of construction: 2021, functionality: fully functional, working width: 1,700 mm, welding power (max.): 600 kVA, wire diameter (max.): 6 mm, type of input current: three-phase, MG950 Mesh Width (Cross Wire Length) for lower feed, single-row: 200 – 900 mm for upper feed, single-row: 200 – 1700 mm for upper feed, double-row (usable width): max. 1530 mm Mesh Length: max. 3200 mm min. 350* mm Distance between the outermost longitudinal wires: max. 1600 mm Longitudinal wire pitch: min. 20 mm Cross wire pitch: min. 10 mm steplessly programmable Clear opening longitudinal wire: min. 15 mm Clear opening cross wire: min. 8 mm Longitudinal wire diameter: 2.0 – 6.0 mm Djdpfoym An Asx Ahnouu Cross wire diameter: for lower feed: 1.5 – 4.0 mm for upper feed: 2.0 – 6.0 mm Longitudinal wire overhang: max. 300 mm, min. 10 mm Cross wire overhang: max. 300 mm, min. 5 mm Number of individual welding groups ESG: 12 Number of portal welding groups PSG18: 12 Max. number of longitudinal wires: 12

Condition: ready for operation (used), machine/vehicle number: 46436, Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Features: - Sliding vertical milling head Duedpfx Aheygia Ejnou - Tilting angle table 260 x 600 mm - Various tool holders - Setup elements - Rotary table D:280 mm - Documentation Condition: workshop-tested

Condition: ready for operation (used), DECKEL FP 2LB, including a 3-axis digital display, from a university, in well-maintained original condition. - 3-axis digital display "ACURITE" Dujdjzbi I Espfx Ahnju - Travel distances X/Y/Z: 795x300x400mm - Automatic feeds (18 speeds) / rapid traverses in all 3 axes - Spindle speed range: 40 - 2000 RPM (18 speed levels) - Vertical/horizontal milling capability - Swiveling vertical head with drilling quill - ISO 40 tool holder - Table surface (angular table): 1000x440mm - Table clamping surface with additional table: 1000x770mm - Coolant system - Various tool holders - Machine light - Documentation Dimensions: L x W x H: 2.5 x 2.4 x 1.8 meters / Weight: 2200 kg Errors and omissions excepted.

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg Duodpfx Ahju Et Nbonou - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm clamping table: Winkeltisch mm table load: 0,45 t Dusdpfx Ahsu Nc Twensu total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. *