Used Numbering for sale (23,580)

Year of construction: 2015, condition: used, machine/vehicle number: IntNr231541, MAYFRAN chip conveyor, hinged belt type, year 2015 Technical Specifications Fully functional Insertion length: 940 mm Most recently installed on a CNC sliding head lathe WEIGHT AND DIMENSIONS Loading magazine dimensions: approx. 2200 x 710 x 1100 mm Loading magazine weight: approx. 250 kg Rbodoyx D Iijpfx Ab Uew The machine can be inspected under power by appointment. Changes and errors in the technical data and information as well as prior sale are subject to reservation!

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Rbsdpfxjyxpz Io Ab Usw Year of manufacture: 2012 Spindle hours: 20,000 Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Condition: used, Year of construction: 2007, operating hours: 14,500 h, machine/vehicle number: IntNr231533, Haas VF-3 (2007) – 3-Axis Vertical Machining Center Operating hours: approx. 14,500 Power-on hours: approx. 33,000 Machine type: CNC Vertical Machining Center Year of manufacture: 2007 Control: Haas Drive type: High-speed spindle (High Efficiency) Axis configuration: 3-axis machining Technical Data Travel distances: X-axis: 1,010 mm Rbsdpfsyxncwsx Ab Uew Y-axis: 660 mm Z-axis: 608 mm Spindle speed: up to 10,000 rpm Axis Drives X/Y/Z axes: Ball screws, precision linear guides 3rd axis: Integrated tilting/rotary table, CNC controlled Tool Changer Capacity: 40 tool stations Taper: SK40 Spindle gearbox replaced in 2024 Equipment Chip conveyor Installation dimensions: approx. 3,870 x 2,510 x 2,690 mm (W x D x H) Machine weight: approx. 6,260 kg Condition The machine is fully functional both electrically and mechanically. Technical documentation included. The machine can be inspected under power by appointment. All technical data and details are subject to change and prior sale. Errors and omissions excepted.

Condition: used, Year of construction: 2000, operating hours: 44,000 h, machine/vehicle number: IntNr231371, STAR SA 16-12 CNC sliding head lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 44,000 Technical specifications: - Number of axes: 5 Rbjdpsyw Imyjfx Ab Ujw - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar loading magazine High pressure unit 40 bar The machine can be inspected under power by appointment. All technical details and information are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Worktable: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg Rjdpsyvt S Eofx Ab Usbw The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!

Condition: good (used), Year of construction: 2017, operating hours: 1,677 h, load capacity: 1,400 kg, lifting height: 3,744 mm, fuel type: electric, mast type: duplex, construction height: 2,360 mm, empty load weight: 1,600 kg, mileage: 1,677 km, Electric stacker Brand: Linde (Germany) Year of manufacture: 2017 Operating hours: 1,677 h Capacity: 1,400 kg Lifting height: 3,744 mm Overall height: 2,360 mm Equipped with FREELIFT Battery: 2017 Supplied with external charger Automatic filling system Rsdpfx Aboyt Exwj Usbw

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231486, Used, refurbished 5-axis CNC machining centre Deckel MAHO DMF 250 linear Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Technical specifications: X-axis travel: 2,500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm B-axis: +/- 105° Working table: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 – 18,000 rpm Tool changer capacity: 30 positions Equipped with: Rodpfx Aboyu Ncij Ujbw - Chip conveyor - Through-spindle coolant, 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be inspected under power by appointment. Technical data and information subject to change and error; prior sale excepted!

Condition: used, Year of construction: 2016, machine/vehicle number: IntNr231489, Keyence IM-6025 Measuring Machine – Fast and Precise Optical Measurement For sale is a Keyence IM-6025 measuring machine, ideal for rapid series inspection, incoming goods control, and precise dimensional verification in production environments. Year of manufacture: 09/2016 Main Features: Manufacturer: Keyence Model: IM-6025 Year: 09/2016 Measuring range: 300 × 200 mm (depending on model) Measuring principle: Optical 2D image processing with automatic contour recognition Measuring accuracy: High repeatability in the micron range Functions: Automatic part position detection Simultaneous multipoint measurement CAD data comparison capability SPC analysis Intuitive user interface USB and network connectivity Lighting system: Transmitted and reflected light illumination (LED) Max. workpiece height: Up to approx. 75 mm Special features: Rsdpfsyu I T Tex Ab Uebw Measurement in seconds without complex alignment Ideal for batch and spot-check inspection Operator-independent measurement results Compact design Condition: Used, tested, and fully operational. Application area: Ideal for metal and plastic processing, stamped parts, turned parts, milled parts, as well as for quality assurance and production control. The machine can be inspected under power by prior arrangement. Subject to prior sale. Changes and errors in technical specifications and information excepted.

Condition: used, Year of construction: 2003, machine/vehicle number: IntNr231507, 5-axis Universal Machining Centre Hermle Type: C 40 U Year of manufacture: 2003 Control: Heidenhain iTNC 530 Travel paths: X-axis: 850 mm Y-axis: 700 mm Z-axis: 500 mm NC Swivel Rotary Table: Diameter: Ø 800 mm Swivel range A-axis: +25° / -110° Rotary range C-axis: 360° Machine weight approx. 10.5 t Redpfsyu Ivujx Ab Usbw Accessories: Complete documentation Coolant system Hydraulic unit NC swivel rotary table Electronic handwheel Renishaw touch probe The machine can be inspected under power by prior appointment. Technical data and specifications are subject to change and error. Sale subject to prior availability!

Condition: used, Year of construction: 2012, operating hours: 7,200 h, machine/vehicle number: IntNr230381, used CNC Tsugami HS2075AX with B-axis, year of manufacture 2012 Operating hours: 7,200 Control: Fanuc 31i-A Maximum machining length: 250 mm Number of controlled axes: 7 (up to 5-axis simultaneous machining) B-axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Rodpfx Aoyt H D Ieb Usbw Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: available on both main and counter spindle Number of linear tool carriers: 2 Total number of tools: 35 Dimensions (LxWxH): 2,110 x 1,200 x 1,885 mm Weight: 3,300 kg Convertible between long and short turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear turret with Y-axis Cross-drilling on rear side Chip conveyor Fire suppression system FMB Minimag 20 bar feeder, year 2012 The machine can be inspected under power by prior arrangement. Technical data and information are subject to change and error; prior sale reserved.

Condition: ready for operation (used), functionality: fully functional, Graphic Whizard numbering, perforating and creasing machine with many accessories. Immediately available Rbedpfx Absvcxwne Usw

Condition: excellent (used), Format (cm): 32x46 Rbodjh Eikmopfx Ab Usw All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

Condition: as good as new (ex-display), functionality: fully functional, Very nice numbering machine for sale. With the capability for perforating, scoring, and slitting. Brand Morgana, model FSN II, suction-fed rotary. High-power vacuum and air pump, can be used with 8 heads. Maximum size 460 mm x 4600 mm. Rbjdpfjyrrcajx Ab Uow Fully mobile, single-phase voltage. Including 2 x vertical numbering blocks and 2 x horizontal numbering blocks. Complete with manual. This machine is working 100%, looks like new and has seen little use. Of course, you are welcome to test the machine with us. We can arrange transport/packaging for you and load it into a truck or container. Request a price including transport (location: the Netherlands). Regards, Henk Hoos.

Condition: used, The Heidelberg MO Numbering & Perforating Unit is a machine with a format of 480 x 650 mm, currently located in Germany. It is equipped with 1 inking unit, 2 linear perforating arms, 2 mounting rings, and 1 numbering shaft. Rsdpjvfxqgefx Ab Ujbw Format: 480 x 650 mm Equipment: 1 X Inking Unit 1 X Numbering Shaft 2 X Mounting Rings 2 X Linear Perforating Arms

Condition: used, Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwardsxx099-1 Numbering Units Leibinger Gradsteller rückwärts / straight Backwards Rjdpfx Abjh Ayd Se Uobw xx099-2 Numbering Units Leibinger Gradsteller vorwärts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rückwärts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwärts / convex Forwards Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAVSome Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video Rbedpjh Ax Hxjfx Ab Usw We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1997, condition: used, machine/vehicle number: 790490, Eindruckwerk mit Nummeriereinrichtung / Imprinting Unit Numbering Heidelberg GTO52Year 1997 - SN. 790490 Rodpforttudex Ab Usbw Eindruckwerk / Imprinting Unit Nummerierwelle mit 2 Sitzringen / Numbering shaft with 2 mounting rings 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Nummerier- Perforierwerk / Imprinting unit Numbering- Perforation Unit Heidelberg GTO46Nummerier- und Perforierwerk für Heidelberg GTO46 Imprinting unit Numbering- and Perforation Unit for Heidelberg GTO46 Rsdpfxsh Ayf No Ab Ujbw Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 15091, Buchdruck Nummerierwerke für Tiegel - Letter Press Numbering units for Tiegel - Cylinder Sünüm - Leibinger Numbering UnitsLetter Press Numbering units for Tiegel - Cylinder Div. Zubehör + Ersatzteile (Nummerierwerke OHT) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Rbedpfsrffnmjx Ab Uew

Condition: used, Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Year 2001 - SN. 361748 Eindruckwerk / Imprinting Unit Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Rodpfsx Uz Tzox Ab Uebw

Year of construction: 2005, condition: used, Process indicator presentation of measured values -Type: IRA-604 -Price: per piece Rsdpsb Uhtiefx Ab Usbw -Number: 2x available -Weight: 0.5 kg

Condition: good (used), Year of construction: 2022, functionality: fully functional, oscillating roller Redpfexyfmmex Ab Uobw 2 numbering units cross feeder

Condition: used, The Heidelberg SM 74 Numbering & Perforating Unit is a machine with a format of 520 x 740 mm. It is currently in stock and located in Germany. The machine is equipped with 1 inking unit, 1 numbering shaft, 2 perforating arms, 2 mounting rings, and 1 cam left and right. The delivery terms are FCA. Format: 520 x 740 mm Equipment: Rodpfx Absvfx E Rj Ujbw 1 cam left and right 2 X Mounting Rings 2 Perforating arm 1 X Inking Unit 1 X Numbering Shaft

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Number of processing units: 10 1st unit: Spraying device Tools included 2nd unit: Glue applicator 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included Rjdpfx Aboyuylue Ujbw 6th unit: Corner rounding unit Tools included 7th unit: Radius scraping unit Tools included 9th unit: Flat scraping unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 3005, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 1,870 mm, table length: 3,756 mm, table width: 1,892 mm, Equipment: CE marking, TECHNICAL DETAILS Rodpfoyuyf Uox Ab Uebw Working area X-axis: 3,700 mm Working area Y-axis: 1,870 mm Table length: 3,756 mm Table width: 1,892 mm Tool clamping system: HSK-F63 Number of tool changer positions: 18 pcs. MACHINE DETAILS Drilling head: F20R Number of drilling spindles: 8 vertical, 12 horizontal System/Software: SCM Maestro Dimensions & Weight Dimensions (L x W x H): 6,100 mm x 2,600 mm x 2,450 mm Machine weight: 4,160 kg EQUIPMENT Worktable with 2 vacuum zones User manual FAST18 18-position tool changer (18/22XX) Electrical schematics CE marking CE certificate Drilling tools Bumper Vacuum pump (250/300 M3/H 50/60 Hz) OF0438 MAESTRO ACTIVE HUMAN-MACHINE INTERFACE SOFTWARE (HMI) OF0429 SCM DIGITAL SOLUTIONS: MAESTRO CONNECT 52.52.20 MAESTRO CONNECT; complete hardware preset for IoT platform 52.52.25 MAESTRO CONNECT; annual membership (validity unclear) OF0422 MAESTRO CNC programming software