Used Hole Number for sale (31,555)

Condition: used, Technical details: floor-plate length: 2003 mm plate width: 1005 mm plate height: 180 mm transport dimensions LxWxH: 2,02 x 1,05 x0,18 m 3 pcs availabe (price per piece) Gbjdpewnfu Njfx Am Eew Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Fixing hole: Number 4 Size D=30mm *

Year of construction: 1994, condition: good (used), multi-function punch, punch, hole punch, pneumatic hole punch Gbsdjvmq Utspfx Am Eow -Article number: 296 346 -Dimensions: 800/400/H1200 mm -Weight: 170 kg

Condition: new, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Godpfou Uvalox Am Eobw Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter, angle milling cutter, shell angle milling cutter -Cutter head: face milling cutter SK50 Godpfx Aoval Rvem Eebw -Type: Ø 140 mm -Number of teeth: 12, without indexable inserts -Hole diameter: 40 mm / bolt circle diameter 66 x 14 mm -Dimensions: Ø 173 x 60 mm -Weight: 5.0 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 80 mm -Type: B2-50/32x80 /OW TGL10906 -Piston rod: Ø 32 mm / M18 -Holes: Ø 30 mm -Number: 4x cylinders available Gedpfov S Tvdox Am Eebw -Price: per piece -Dimensions: 330/77/H90 mm -Weight: 5.8 kg/pc.

Condition: good (used), The scope of delivery includes: 1x Stand Protector: used Manufacturer: Stow Type: Pal Rack NS Material color: yellow Total height: 340 mm Fits frame profile: 85 mm Leg dimensions: 65 x 65 mm Material thickness: 3.00 mm Deflector height: 50 mm Hole diameter: 11 mm Hole spacing: 200 mm Number of holes: 4 Godjv Uk Rwopfx Am Eobw Including mounting hardware consisting of: 4x M10x35 mm hexagon screw 4x M10 hexagon nut 8x M10 washer Your contact person: Mr.: Andre Eveing Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Gbsdpfx Ajwt Abwsm Esw Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, HEAVY-DUTY SHELVING   Pallet racking / Storage racking / Industrial racking   Heavy-duty shelving with galvanized grating support Dimensions approx. 2,000 × 800 × 2,200 mm (W × D × H) Steel shelving with orange-colored crossbeams and side protection grille   For sale is a used heavy-duty shelving unit in a sturdy steel construction with galvanized upright frames, orange steel crossbeams, and grating support.   The shelving is suitable for storing materials, tools, spare parts, components, and storage goods in warehouses, workshops, and industrial facilities.   Technical data:   Type of equipment: Heavy-duty shelving / Pallet racking / Storage racking Manufacturer: unknown Design: Boltless steel shelving system Number of shelf bays: 1 Material: Steel / Metal Condition: used   Dimensions:   Overall width: approx. 2,000 mm Overall depth: approx. 800 mm Overall height: approx. 2,200 mm   Shelving design:   Galvanized steel uprights with hole grid Orange steel crossbeams 1 storage level with galvanized grating support Upper crossbeam level without floor support Side protection grille on one side of the shelving Lateral frame bracing Footplates for floor mounting Height-adjustable crossbeams via bolt connections   Load capacity:   The permissible bay load and shelf load are not documented. A binding load capacity specification cannot therefore be provided.   Equipment:   Heavy-duty shelving steel construction Galvanized upright frames Orange-colored crossbeams Metal grating support Gedpfx Ae Aa Ni Aem Esbw Side protection grille Diagonal and horizontal bracing Mounting feet / footplates Equipment as shown in the images   Areas of application:   Warehouses Industrial warehouses Workshops Spare parts storage Material storage Production facilities Mechanical engineering Industrial equipment   Dimensions / Transport:   Dimensions assembled (W × D × H): approx. 2,000 × 800 × 2,200 mm Weight: estimated approx. 100–150 kg   The dimension specifications are based on on-site information. The actual weight has not been determined. The shelving can be disassembled for transport.   Condition:   Used Visual condition as shown in the images Signs of wear and tear are present.   The permissible load capacity and the inspection status are not documented and must be checked by the operator before use.   Scope of delivery:   1 × Heavy-duty shelving / Pallet racking Upright frames and steel crossbeams as shown in the images 1 × Storage level with grating support 1 × Side protection grille Otherwise, scope of delivery as shown in the images.   Collection or shipping by freight carrier possible by arrangement. Dismantling and loading must be agreed in advance. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: excellent (used), WEBO – an industrial multi-spindle drilling machine with four independent heads. This machine is designed for serial drilling of multiple holes simultaneously, which significantly increases production efficiency. Each head has its own drive and adjustable height and rotational speed. Technical specifications: * Manufacturer: WEBO * Number of heads: 4 * Number of spindles: 4 * Motors: 4 × Siemens * Power of one motor: 0.75 kW * Power supply: 220/380 V * Spindle speed: 200–3000 rpm * Speed adjustment by changing the belt position * Stable, heavy cast iron construction * Condition: used, functional Godpfxjz Sncbj Am Eebw

Condition: new, Working width 3000 mm Working height 2000 mm Number of cylinders 5 St. S&S Frame Press, Type RP 3000 ----- Working width: 3000 mm Working height: 2000 mm Item 1 S&S FRAME PRESS Type RP 3000 Item 2 Centre pressure beam with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2000 mm high Item 3 Shut-off valve on the 1st vertical cylinder Item 4 Shut-off valve on the 3rd vertical cylinder Item 5 Shut-off valve on the upper horizontal cylinder Item 6 Shut-off valve on the lower horizontal cylinder Manufacturer’s technical description: Sturdy welded frame construction made from thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole spacing. Continuous abutment on the left-hand side for width compression; lower abutment on two levels. Vertical press cylinders mounted on special pressure beams with one-handed quick-adjustment and weight compensation, height-adjustable in 50 mm hole spacing; long sliding carriages ensure the long-term absorption of high pressing forces. Quick, smooth width adjustment via a ball-bearing-mounted carriage with central locking, fixed at 50 mm intervals. Upper horizontal press cylinder infinitely height-adjustable and fitted with weight compensation. Lower horizontal press cylinder with centring bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Pressure plate and support width 130 mm Electro-hydraulically controlled machine, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick-adjustment, 2 horizontal pressure cylinders d = 40 mm, stroke 80 mm double-acting, with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulating valve from 20 to 150 bar (corresponding to 400 to 3000 kg) vertical pressing force, with a 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working dimensions: 3000 mm x 2000 mm (length x height) ----- Price of the above machine on enquiry! Gbedpfx Amsz Sd Dbo Eow ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Further options available on request. Please contact us for the full price list! ----- (Technical data as per the manufacturer, subject to change; the illustration may show optional equipment!) The images show a similar model. Original images are not yet available.

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Gbsdpfx Amjydaads Eow Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data – Installation: Number of racking rows: 01 unit Length per racking row: 17,040 mm Number of bays per row: 06 units Number of levels plus ground level: 06 units Technical Data – Capacity: Pallet spaces per bay: 21 units Pallet spaces per racking row: 126 units Total pallet spaces: 126 units Max. bay load: 19,000 kg Lowest clear shelf height: 1,080 | 880 mm Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,055 kg Scope of supply: 07x pallet rack frames, used Material finish: sendzimir galvanized Frame type: P215 Profile dimensions: 120 x 100 x 2.5 mm Including horizontal and diagonal braces, and base plates The frames are pre-assembled (bolted lattice) Height: 14,100 mm Depth: 1,050 mm 72x pallet rack beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Maximum load per pair of beams: 3,165 kg, with uniformly distributed load Note: The functionality of the beams is fully ensured in spite of holes. SSI project with heat baffles mounted as per manufacturer's specifications! 144x safety pins, used Material finish: sendzimir galvanized For securing beams against inadvertent lifting 28x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used Finish: fully galvanized For leveling the rack frames when installing on uneven surfaces 01x load capacity sign with field and shelf load details, manufacturer and job number dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Gbjdpfeyfg Hmox Am Eow Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Delivery or shipment is possible at extra cost, which can be quoted separately depending on the delivery location and the scope of delivery.

Condition: excellent (used), Roller conveyors for the furniture industry, WTT Fördertechnik GmbH, Type 121 Price for: 1 unit = 75 EUR (total length 3m) For larger quantities, price on request. Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm, adjustable by +/- 25 mm Number of feet FA = 1 unit per running meter Consists of: - 2 units of side rails (side profiles), each 3000 mm long, made of profile 20/80/40/3 mm, with a grid spacing of 25 mm, holes suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. Gsdpfx Amjwwmite Ejbw Weight per side rail: 8.15 kg - 15 units of insertable load rollers Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness, Axle - 12 mm spring axle, Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel-finished. Installation length IL = 500 mm Weight per roller: 2.4 kg - 3 units of screw-on bridge support feet in a stable welded construction made of special profile with cross brace, height adjustable by +/- 25 mm via threaded spindle M16 with screw slot. With floor mounting plates and dowel hole. Powder-coated in RAL 3000 red. Weight per foot: 2.5 kg. (Subject to changes and errors in the technical data and prior sale)

Condition: good (used), Scope of delivery includes: 01x upright protector, used Material color: yellow - painted Overall height: 1,190 mm Overall width: 122 mm Internal width: 110 mm Gsdpfx Amsw Ngzfs Esbw Suitable for frame profile: 110 mm Total depth: approx. 60 mm Material thickness: 6.00 mm Borehole diameter: 13 mm Hole spacing: 650 mm Weight | per unit: approx. 12.69 kg Number of holes: 02 pcs. Including fastening material consisting of: 02x hexagon bolt M10x35 mm 02x hexagon nut M10 04x washer M10 General information about the item: This item is only offered for collection. Any transport or shipping of this item is subject to additional costs, which can be requested from us separately depending on place of delivery and scope of delivery.

Condition: reconditioned (used), Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Gbjdpfsxnqw Tox Am Esw Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V 3 pendulum pressure plates for studio windows 1 pendulum pressure plate for pointed windows 1 extension for pendulum pressure plate 1 small parts allowance Image and video not original, show identical model ----- Price of the above mentioned machine, upon request! ----- For your information: One image shows homemade counterprofiles. This image is for illustrative purposes only. The counterprofiles are not included with this frame press. ----- (technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2018, offer consists of: Gsdoxr Ahlopfx Am Eebw - punch unit HP-200A Horizon HP-200A punch unit - features: press- and punch - numbers of holes: max. 4 holes; min. 2 holes - punch hole position: max. 14mm; min. 9mm - punch hole diameter: 6mm - size: max. 356x508mm; min. 120x90mm - punch thickness: max. 4mm - speed: max. 4000 Broschüren/h - power: 230V / 50Hz - 0,68kW - dimensions: 500x770x1035mm - weight: 168kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of manufacture: Nov 2000 Gsdpfx Ajxwkwfsm Ejbw Year of construction: 2000 Serial number: 9 R 22.5 USED TRAILER TIRES ON 8 HOLES RIM.

Condition: used, Year of manufacture: Nov 2005 Year of construction: 2005 Serial number: 280/75 R 22.5 ON RIM 10 HOLES. Gsdpfx Amjxwk Tto Eebw SPECIALE HEAVY DUTY TERMINAL TRACTOR TIRES 10/ 28 MM

Condition: good (used), clear span: 2,700 mm, load capacity: 3,000 kg, Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Installation Technical Data: Number of racking rows: 01 piece Length per racking row: 16,900 mm Number of bays per row: 06 pieces at 2,700 mm each Gedpfx Ajx Ebrpsm Esbw Number of levels plus ground level: 05 pieces Volume Technical Data: Pallet spaces per bay: 18 pieces Pallet spaces per row: 108 pieces Total pallet spaces: 108 pieces Assumed specifications: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Scope of supply includes: 07x pallet racking frames, used Material finish: sendzimir galvanized Frame type: P113 Profile dimensions: 100 x 100 x 2 mm Including horizontal and diagonal bracing, frame protectors and base plates Frames are pre-assembled (bolted truss structure) Height: 8,000 mm Depth: 1,100 mm 60x pallet racking beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Bracket: 5 HK (Hooks) Maximum load per pair of beams: 3,000 kg (uniformly distributed load) Note: The functionality of the beams is ensured despite the holes SSI project with heat dust shields that, according to the manufacturer's information, were bolted on! 120x Safety pins, used Material finish: sendzimir galvanized For securing the cross beams against unintentional lifting 28x expansion anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Design: completely galvanized For leveling the frames installed on uneven floors 01x Load sign With specifications for bay and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to extra costs, which can be requested separately from us depending on the place of delivery and scope of delivery.

Condition: new, Technical data for the base plate: Gbjdpfx Ajx Eldljm Esw Shelving system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x Base plate, new Type designation: FT 911 Suitable for frame profile width 90 mm | 75 mm Material color: RAL 5010 Enzian Blue Material thickness: approx. 6.00 mm Overall width: 165 mm Overall depth: 80 mm Number of drill holes: 2 pieces Drill hole diameter: 13 mm Weight: approx. 0.64 kg | per piece Including the following fastening material: 02x Hex head screws M10 x 30 mm 02x Nuts M10 04x Washers M10 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Stock number: 2832 Machine number: 3004/73 Manufacturer: Raster Year of construction: 1973 Type / Model: HR40NL Pressing force: 40 t Table: 650 x 385 mm ram: 350 x 190 mm Projection: 175 mm Distance table - bottom edge of plunger: 300 mm through hole: 350 x 130 mm ram adjustment: 80 mm Plunger stroke: 0 to 70 mm adjustable Installation height: 235 to 305 mm Sheet width: 10 to 200 mm Sheet thickness continuous stroke: mm Stroke rate: 40 to 180 /min Connection: 4 kW Accessories/equipment: Pliers feed Condition: good Gbsdpfordgncjx Am Ejw Weight: approx. 4 tons Machine dimensions: 1,400 x 1,800 x 2,250 mm

Condition: new, Year of construction: 2025, Fixed clip former CF-25 was designed by our company for fixed cleat production of standing seam roofing panels with a seam high of 25mm. Following clip is the main fixation element that ready roofing panel fastens to the roof base. A fixed clip has many advantages, such as simple design, low production cost, easy installation. We make clip formers for 25, 27 or 39mm clip highs. As blank, you can use metal in strips of the required width with up to 0.8 mm thickness. You can make product clip in one easy step -just need to put blank metal into the press and activate the press with manual handle system. Clip former makes clip bending and necessary holes cut in one-step operation. Thus, with our clip production press customer has opportunity to produce a fixed clamp in numbers, using it for his own needs or to sell it for other roofing installation companies. Fixed clip former is lightweight one, which allows taking device to working places and transport it easily. For productive work, clip former must be securely fastened to a flat surface. Fixed clip former press CF-5 made by our company will save your time and money from looking for standing seam fixation elements suppliers, will help you effectively organize your product production and will make roofing works more convenient. Godpfjqxadbsx Am Eebw We also manufacture sliding clip formers. As an option we can make fixed clamp former for standing seam panels of 25, 27mm or 39mm lock high, those panels you can make with following machines: Standing seam roofing machine F3; Roof panel standing seam roll forming machine F3-27 with clip relief; Standing seam roll former F3-39;

Condition: new, roll diameter: 100 mm, roll width: 35 mm, The scope of delivery includes: Godpsrtplnefx Am Esbw 01x double-stop brake roller, new Roller material: Polyamide wheel Plain bearing with bearing marks Roller material color: cream white Material color frame: galvanized Total height: 135 mm Castor Ø: 100 mm Castor width 35 mm Rotation radius: 360° Panel dimensions: 105 x 80 mm (WxD) Screw grid: 80 x 60 mm (WxD) Drill hole Ø: approx. 11 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 0.908 kg Advantages compared to PA wheels: - The PA wheels are very low-wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Gsdpfxohhymdj Am Eebw Mr. Falk Deutsch Mr. Simon Blank Included in the scope of delivery: 1x shelf connector, used Material color: Sendzimir galvanized Total length: approx. 260 mm Clear width: 197 mm Profile dimensions: U 50 x 12 mm Number of holes: 2 pcs Hole diameter: approx. 11 mm Weight/piece: 0.244 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelf systems. Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 12.020 mm Number of bays / row of shelves: 04 pcs á 2.880 mm Number of levels plus floor level: 03 pcs. Included in delivery: 05x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 24x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair 1.600 kg with evenly distributed load 48x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 10x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground Gsdpom Nchkefx Am Ejbw 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm